• Easy & fast: connect, measure, read & record: Pressure, Temperature, Flow, RPM etc
• Flexible & multifunctional: measure most industrial sensor inputs - both analogue and frequency
• Digital & powerful: measure pressure peaks easily stored and recalled
• Precise and sustainable: Made to the highest standards to suit your environment
• Fast & Ready: Fast data transmission for accurate recording & sharing of key events

Datasheet

User Manual

• Simple and intuitive menu navigation despite small dimensions.
• Backlit LCD display makes it easy to read measurement values.
• I ntegrated HYDROlink6 ADVACED software key (makes it possible to show measurement values on external monitors by using a PC or laptop)
• Excellent connectivity: TTL switching contact and trigger inputs and outputs

Datasheet

• Flexible: 2 analog measuring inputs, and 1 frequency measuring input
• Easy to handle: huge keys, illuminated display
• Suited for field application: rugged aluminium housing

•  Huge internal memory: For around 1 Million measure values
• Powerful battery supply: Measuring the whole day without charging
• Intuitive operations: with capacitive keypad

Datasheet

User Manual

• Setting and checking operating pressures is easier than ever
• Simple data transmission – via USB and Bluetooth^®
• For mobile use and stationary continuous operation

Datasheet

The devices of the ESS3 A1 series are used to measure pressure in water networks and can be installed directly in underfloor hydrants. These devices are ideally suited both for short-term measurements (for locating problems) and for long-term measurements over several years. Other applications include validation of pipe network calculations and documentation of leak tests according to DVGW W400-2.

Datasheet

The devices of the ESS3 R1 series are used to measure pressure, differential pressure, and temperature in supply networks for gas, water, and long-distance heating. The device also suited to measure general liquid and gaseous media in industry.

Datasheet

The devices of the ESS3 R2 series are used for leak testing in pipeline construction. In addition to the pressure measurement, the device is able to determine the temperature of the pipe line. The device automatically monitors the temperature-compensated test pressure and thus compensates pressure variations caused by temperature influences on the pipe line. Thus, the measuring results are more significant than pure pressure measurements.

Datasheet

• Leak tests for gas supply in accordance with G469 B3
• Leak tests for water supply in accordance with W400-2 / EN 805
• Sewer leak testing according to EN 1610
• Testing of cable protection tubes
• Leak tests for process engineering / industry

Datasheet

When ambient conditions, for example in a laboratory, need to be documented securely and highly accurately, the testo 176 P1 is the right data logger. It has an integrated absolute pressure sensor and connection possibilities for two external temperature/humidity probes (optional).

Datasheet

User Manual

Pressure test kits of the PMS3000 series are used for leak testing in pipeline construction. The operating terminal, the measurement technology, and a log printer are housed in a rugged and waterproof plastic case suitable for use at construction sites. Via a color graphic touch display, all parameters of a leak test can very easily be entered and the test procedure controlled. All test methods of the DVGW directives G469 (A): 2019 and W400-2, Part 16 : 2004 are stored in the device. Intuitive operation is thereby possible even for inexperienced users without prior knowledge. Each test procedure ends with an automatic evaluation of the results of the leak test. During the test, a graphic depiction of the test procedure is available on the display. Other test methods in accordance with pressure vessel regulations, drains and sewers (EN 1610), cable protection tubes (e.g., ZTV TKNetz40) can also easily be integrated.

Datasheet

• 0.05% full scale (FS) accuracy
• Pressure ranges to 20,000 psi (1400 bar)
• Eleven selectable pressure units
• Large, easy-to-read display with five-digit resolution
• % pressure indication and additional bar graph for quick visual reference
• Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C)
• 0 to 5V analog output
• Pressure switch test
• Minimum/maximum, tare and alarm functions
• IDOS compatible and RS232 serial interface
• Free of charge monitoring and control software
• Stainless steel or Inconel pressure cavity for aggressive media

Datasheet

Bedienungsanleitung

• nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar
• accuracy: 0.05 % FSO BFSL (class 0.05)
• modular sensor concept
• graphics-capable display
• background illumination
• communication interface USB 2.0
• stainless steel housing d = 100 mm
• zero point calibration
• data logger

Datasheet

Model CPH6300-S1 (1-channel version) Model CPH6300-S2 (2-channel version)

Datasheet

User Manual

• Ideal for monitoring indoor air quality (IAQ)
• Blends in perfectly with the surroundings thanks to an optional, customizable deco-cover
• Simple to install, integrate and operate – particularly user-friendly with air quality displayed in the form of a traffic light system
• Perfectly networked: data storage in the Testo Cloud, real-time alarm via email or SMS (optional in conjunction with an Advanced licence)

Datasheet

• Easy and clear layout: Very easy operation via 7" color display with touch panel
• Versatile: Up to 12 sensors/meters connectable also third-party sensors/meters including power supply
• Reliable: Stores all measured values on a memory card, easy reading-out via USB stock possible
• Intelligent energy analysis: Daily/weekly/monthly evaluations mathematic function for internal calculations, e.g. the typical key data of a compressed air plant:

Datasheet