AS-Schneider F Series 3 Valve Manifolds are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifolds are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are G 3/8 female threaded with fitted tube fittings or butt weld ends. The below mentioned manifolds are provided with test port connections M20 x 1.5.
 Datasheet |
AS-Schneider F Series 3 Valve Manifolds are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifolds are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are G 3/8 female threaded with fitted tube fittings or butt weld ends. The below mentioned manifolds have no test ports.
| Datasheet |
AS-Schneider F Series 5 Valve Manifolds are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifolds are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet and outlet connections are G 3/8 female threaded with fitted tube fittings or butt weld ends.
| Datasheet |
Transmitter Mounting Kits are normally containing:
- Pressure Measurement: 2 Screws and 1 Seal Ring or 4 Screws and 1 Seal Ring
- Differential Pressure Measurement: 4 Screws and 2 Seal Rings
| Datasheet |
AS-Schneider F Series Manifold-Combinations are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifold-combinations are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are butt weld ends and the outlet (Blowdown) connections are provided with tube fittings. The test connections are provided with M 20 x 1.5 male threads c/w sealing cap. Manifold-Combination means the welded assembly of a 3 Valve Manifold and 2 Blowdown Valves. Using a separate installation the manifold body is not heated during the Blowdown operation, therefore preventing an inadmissible heating of the Manifold / Transmitter Interface.
| Datasheet |
AS-Schneider F Series Manifold-Combinations are designed, manufactured and tested with respect to the relevant standards applicable in this field. The manifold-combinations are for direct mounting according to DIN EN 61518 (IEC 61518). The standard inlet connections are butt weld ends and the outlet (blowdown) connections are provided with tube fittings. Manifold-Combination means the welded assembly of a 3 Valve Manifold and 2 Blowdown Valves. Using a separate installation the manifold body is not heated during the Blowdown operation, therefore preventing an inadmissible heating of the Manifold / Transmitter Interface.
| Datasheet |
The Bracket fits to AS-Schneider E Series Manifolds Type D, W and 5 as well as to our F Series Manifolds Type S541/N541. The difference between AKM-D and AKM-C is just the thread type of the manifold/bracket bolts The standard bracket Type D requires M10 bolts and for the CoplanarTM Style Manifolds 3/8-16 UNC bolts are required. The bracket is designed for panel, wall and 2" pipe mounting and gives full clearance for ease of handle operation. The Mounting Bracket contains:
- 1 Mounting Bracket
- 2 'U' Bolts
- 4 Washers – 8.4
- 4 Hexagon Nuts M8
- 2 Washers – 10.5
- 2 Socket Head Cap Screws M10x14 → AKM-D Type respectively
- 2 Socket Head Cap Screws 3/8-16 UNC x 5/8" → AKM-C Type
| Datasheet |
All valves and manifolds as well as our Double Block & Bleed Piping Ball Valves are suitable for up to 100% hydrogen use. In other words, our instrumentation valves and process valves can also be used safely in natural gas applications with, for example, a 20% hydrogen blending. This feature is of particular interest to natural gas plant operators and gas network operators who want to convert their natural gas pipelines for hydrogen.
| Datasheet |
