Back to page

ICS Schneider Messtechnik
ICS Schneider Messtechnik – Kontakt

Voltage Tester DUSPOL® analog

Voltage Tester DUSPOL® analog

For more than 70 years, BENNING has been developing two-pole voltage testers at the highest level.
The DUSPOL® voltage tester is professionally used worldwide in industry and trade, e. g. in electrical installations, on machines and systems related to renewable energy.

  • VDE-tested and approved in compliance with EN 61243-3
  • safe voltage testing for voltages of up to 1000 V AC/DC
  • measuring category CAT IV 600 V, CAT III 1000 V
  • load connection with vibration alert
  • intentional tripping of a 30 mA RCD
  • phase sequence test in a three-phase mains
  • single-pole phase test
  • no batteries required
Datenblatt
  • phase-sequence test (counter-clockwise / clockwise)
  • single-pole phase test: „⚡” symbol (red LED)
  • measuring point illumination
  • acoustic and optical continuity test
  • frequency measurement 1 – 1000 Hz
  • voltage indication 1 – 1000 V AC TRUE RMS / 1200 V DC
  • resistance measurement and diode test with conducting-state voltage indication
  • lc display with background lighting
  • sensor of non-contact cable break detector
  • load connection via large-scale push buttons
  • vibrating alert in the test handle
  • shock-resistant housing with protection against dust and water jets (protection class IP 65) and rubberized test handle
  • DIN EN 61243-3 (VDE 0682-401): 2015 standard

 

 

  • tested and approved in compliance with the current DIN EN 61243-3 (VDE 0682-401) standard, CAT IV 600 V respectively CAT III 1000 V
  • safe voltage testing up to 1 – 1000 V AC/ DC
  • vibrating alarm for safe voltage detection
  • high resistance voltage test without push-button activity
  • part time load circuit, no measuring errors due to irritating capacitive and inductive voltages by means of intended load connection via push buttons
  • intentional tripping of a 30 mA RCD
  • battery-independent voltage indication from 50 V AC/DC on
  • acoustic continuity check via buzzer and yellow LED (DUSPOL® expert, DUSPOL® digital)
  • phase sequence test in a three-phase mains
  • single-pole phase test
  • measuring point illumination by means of white high-power LED (DUSPOL® expert, DUSPOL® digital)
  • detector for non-contact localization of cable breaks on exposed and live lines (DUSPOL® expert, DUSPOL® digital)
  • shock-resistant housing with protection against dust and water jets (protection class IP 65) and rubberized test handle
  • automatic LC display illumination by means of a light sensor (DUSPOL® digital)
DUSPOL® digital DUSPOL® expert DUSPOL® analog
indication LCD / LED LED LED / solenoid movement
Voltage range 1 – 1000 V AC (TRUE RMS)
1 – 1200 V DC
12 – 1000 V AC/DC 12 – 1000 V AC/DC
continuity test yes / buzzer + yellow LED yes / buzzer + yellow LED –
phase-sequence test yes / green LED
(left / right)
yes / green LED
(left / right)
yes / LCD “R” symbol
single-pole / phase test yes / red ⚡ LED yes / red ⚡ LED yes / LCD “R” symbol
polarity test yes / LCD yes / LED yes / LED
load connection
via push buttons
IS = 550 mA
(1000 VDC)
IS = 550 mA
(1000 VDC)
IS = 600 mA
(1000 VDC)
30 mA FI triggering
via push button
yes yes yes
vibrating alarm yes yes yes
measuring point illumination yes yes –
resistance measuring 0.1 kΩ – 300 kΩ – –
diode test 0.3 V – 2 V pass – / reverse direction –
frequency measuring 1 Hz – 1000 Hz – –
non-contact phase tester cable / break detector yes / yellow LED (flashing) yes / yellow LED (flashing) –
protection class IP 65 IP 65 IP 65
overload class CAT IV 600 V
CAT III 1000 V
CAT IV 600 V
CAT III 1000 V
CAT IV 600 V
CAT III 1000 V
VDE / GS approval yes yes yes
item no. 050263 050262 050261

Technical changes, model or color modifications, mistakes and delivery facilities without notice! No responsibility for literal mistakes.