Level Transmitter IP 142

- Welded metallic measuring cell
- Smallest measuring range: 0…200 mbar/ 0…2 mH2O
- Largest measuring range: 0…20 bar/ 0…200 mH2O
- Configurable measuring ranges
- Accuracy ≤ 0,25%
- Analog output: 4…20 mA with HART Communication
- Optionally integrated PT100 / PT1000 Sensor for temperature measurement
- Ex II 1G Ex ia IIC T4 / T6 Ga
Datasheet
|
User Manual
|
Description
The membrane of the IP142 level transmitter is welded directly to the housing and does not have to be sealed internaly with an o-ring. The medium is only in contact with highly resistant CrNi stainless steel 1.4571 and there is no weakspot along an elastomer seal. The protective cap can be removed if necessary and the thread underneath can be used as a process connection. ATEX certified and with FEP suspension cable, the model is ideal for potentially critical areas and media. The measuring range can be adjusted on site using the HART interface. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet.
Applications:
|
Technical data:
| Measuring ranges | Smallest measuring range: 0…200 mbar / 2 mH2O |
| Largest measuring range: 0…20 bar / 200 mH2O | |
| Analog output | 4…20 mA, 2-wires |
| 4…20 mA, 2-Leiter, II 1G Ex ia IIC T4 Ga | |
| Power supply | 20 mA output: 12…30 V DC |
| Accuracy | ≤ ± 0,25 % FS @ 25 °C ≤ ± 0,5 % FS @ 25 °C at pressure range ≤ 250 mbar |
| Long term stability | ≤ ± 0,2 % FS / Year |
| Response time | 200 ms – others on request |
| Swich-on time | < 1 s |
| Temperature coefficient | Zero: ≤ ± 0,02 % FS / Kelvin ≤ ± 0,04 % FS / Kelvin at pressure range ≤ 250 mbar |
| Span: ≤ ± 0,02 % FS / Kelvin | |
| Medium temperature | -20…100 °C |
| Surrounding temperature | -20…60 °C |
| Storage temperature | -40…85 °C |
| Short-circuit resistance | Permanent |
| Reverse polarity protection | Protection against reverse polarity, but no function |
| Electromagnetic compatibility | Interference emissions and immunity acc. to EN 61326 |
| Wetted materials | Housing: CrNi-steel 1.4571 |
| Sensor: CrNi-steel 1.4571 | |
| Protection type | IP 68 |
| Weight | Approx. 700 g with 5 m Cable |
Technical data
| Output Signal | 4: 4…20 mA 2-wire, 4T: 4…20 mA 2-wire and PT100 3-wire, 4F: 4…20 mA 2-wire and PT1000 3-wire, EH: 4…20 mA 2-wire / Ex II 1G Ex ia IIC T4 Ga, TH: 4…20 mA 2-wire / Ex II 1G Ex ia IIC T4 Ga and PT100 3-wire, FH: 4…20 mA 2-wire / Ex II 1G Ex ia IIC T4 Ga and PT1000 3-wire |
|---|---|
| Measuring Range | 0…200 mbar / 0…20 kPa, 0…400 mbar / 0…40 kPa, 0…600 mbar / 0…60 kPa, 0…1 bar / 0…100 kPa, 0…1,6 bar / 0…160 kPa, 0…2,5 bar / 0…250 kPa, 0…4 bar / 0…400 kPa, 0…5 bar / 0…500 kPa, 0…6 bar / 0…600 kPa, 0…10 bar / 0…1 MPa, 0…16 bar / 0…1,6 MPa, 0…20 bar / 0…2 MPa, 0…4 mWS, 0…6 mWS, 0…10 mWS, 0…16 mWS, 0…25 mWS, 0…40 mWS, 0…60 mWS, 0…100 mWS, 99: Special Measuring Range |
| Housing Material | 1: CrNi-Steel 1.4571, 9: Special version |
| Cable Length | 002: 2 m cable, 005: 5 m cable, 010: 10 m cable, 050: 50 m cable, 100: 100 m cable, Special lengths in meters |
| Protective Cap Material | 1: CrNi-Steel 1.4571, 9: Special version |
| Cable Material | 6: FEP cable |
| Options | 0: None |

Datasheet