DatasheetDescription
The membrane of the IP142 level transmitter is welded directly to the housing and does not have to be sealed internaly with an o-ring. The medium is only in contact with highly resistant CrNi stainless steel 1.4571 and there is no weakspot along an elastomer seal. The protective cap can be removed if necessary and the thread underneath can be used as a process connection. ATEX certified and with FEP suspension cable, the model is ideal for potentially critical areas and media. The measuring range can be adjusted on site using the HART interface. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet.
Applications:
|
Technical data:
| Measuring ranges | Smallest measuring range: 0…200 mbar / 2 mH2O |
| Largest measuring range: 0…20 bar / 200 mH2O | |
| Analog output | 4…20 mA, 2-wires |
| 4…20 mA, 2-Leiter, II 1G Ex ia IIC T4 Ga | |
| Power supply | 20 mA output: 12…30 V DC |
| Accuracy | ≤ ± 0,25 % FS @ 25 °C ≤ ± 0,5 % FS @ 25 °C at pressure range ≤ 250 mbar |
| Long term stability | ≤ ± 0,2 % FS / Year |
| Response time | 200 ms – others on request |
| Swich-on time | < 1 s |
| Temperature coefficient | Zero: ≤ ± 0,02 % FS / Kelvin ≤ ± 0,04 % FS / Kelvin at pressure range ≤ 250 mbar |
| Span: ≤ ± 0,02 % FS / Kelvin | |
| Medium temperature | -20…100 °C |
| Surrounding temperature | -20…60 °C |
| Storage temperature | -40…85 °C |
| Short-circuit resistance | Permanent |
| Reverse polarity protection | Protection against reverse polarity, but no function |
| Electromagnetic compatibility | Interference emissions and immunity acc. to EN 61326 |
| Wetted materials | Housing: CrNi-steel 1.4571 |
| Sensor: CrNi-steel 1.4571 | |
| Protection type | IP 68 |
| Weight | Approx. 700 g with 5 m Cable |
