Category Archives: Beitrag

Comparing compressed-air leak rates at different network pressures: reference measured values to a common condition

During a compressed-air audit, a leak rate of 63 Nl/min is measured at a leaking...

Moisture in a load cell junction box: systematically checking leakage currents, signal drift and sealing

A vessel scale with four load cells suddenly develops a slowly drifting zero point after...

Installing a radar level sensor in an angled nozzle: correctly adjusting antenna alignment and reflection direction

An existing storage tank has a process nozzle welded into the roof at an angle....

Installing impulse lines for liquids: correctly managing gas bubbles, elevation differences and transmitter position

A flow measurement using an orifice plate operates with a differential pressure range of, for...

Measuring particles in compressed air: correctly accounting for pressure level, sampling and counting volume

A compressed-air line operates, for example, at 8 bar. To check the compressed-air quality, a...

pH measurement in ultrapure water: correctly handling low conductivity and unstable readings

A pH electrode is immersed in freshly produced ultrapure water. The measuring instrument has been...

Measuring dew point in high-pressure hydrogen: correctly accounting for sample pressure reduction and pressure dependence

The residual moisture in a hydrogen system is to be monitored. The H₂ in the...

Reusing a Dynisco sensor after removal: checking thread, diaphragm and sealing surface before reinstallation

A Dynisco melt pressure sensor is removed from the extruder during maintenance. At first glance,...

Shunt heats up under load: considering temperature coefficient and cooling as measurement errors

A DC circuit is monitored using a measuring shunt. Immediately after switch-on, the measuring instrument...

Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.