Large, easy-to-read 5″ colour display – perfect for outdoor use
Store up to 6 million measured values – ideal for long-term monitoring
Flexibly expandable – e.g. with pressure, temperature and flow sensors
Fast-charging function – full working day operation, recharged in <2 hours
Rugged housing – built for tough applications
For monitoring, controlling, and diagnosing pressurized systems, the precise measurement of pressure, temperature, and flow rate is essential. The MultiSystem 5070 is the indispensable tool for fluid specialists and professional service technicians. Individually selectable favorites, easy screenshot creation, and high-performance lithium-ion battery technology with a fast-charging function ensure comfortable and efficient operation throughout the entire working day.
The MultiSystem 5070 features six analog measurement inputs, two switchable inputs (f/A), and one digital input and output. In addition, 32 special channels are available for calculations or CAN integration. The signal inputs support various measuring ranges such as 0/4…20 mA, 0/2…10 V, 1…5 V, 0.5…4.5 V, and ±10 V. For frequency and pulse measurements with direction detection, ranges from 0.25 Hz to 20 kHz are possible.
The internal memory holds up to 500 measurement series, with up to six million measured values storable per series. For communication and data transfer, the device offers a wide range of interfaces: USB Device, USB Host, RS232, and two CAN interfaces (CAN 1: J1939/CANopen, Hydrotechnik products; CAN 2: J1939/CANopen).
The system can be flexibly expanded with various channel extensions via MultiXtend. The configuration of the measurement set can be individually adapted to the application with pressure, temperature, and flow sensors, MultiXtend, or a particle monitor.
With the MultiSystem 5070 sets, you receive professional complete solutions for precise measurements in the fields of pressure, temperature, and flow. The sets are specially tailored to the requirements of service, maintenance, and mobile testing tasks. Each set includes the powerful MultiSystem 5070 measuring device as well as high-quality accessories that enable direct and flexible commissioning. Depending on the version, you receive the appropriate pressure sensors, temperature sensors, and/or flow sensors as well as extensive accessories for comfortable and efficient use in everyday operations. Thanks to the robust transport cases, all components are securely stored and ready for use at any time.
| Measurement Range HySense® PR 400 Pressure Sensor |
Code | |
|---|---|---|
| 0 … 600 bar | 18 | |
| 0 … 400 bar | 15 | |
| 0 … 250 bar | 17 | |
| 0 … 60 bar | 21 | |
The MultiSystem 5070 pp Set is a practical all-in-one solution for professional pressure measurement and monitoring in industrial and service applications. The set consists of the robust MultiSystem 5070 measuring device, two high-quality HySense® PR 400 pressure sensors (selectable in the range from 0…60 bar up to 0…600 bar), two measuring cables (5 m each), two direct connectors, a power supply unit, USB cable, USB stick, and the comprehensive HYDROcom6 ADVANCED software. All components are safely and neatly housed in a sturdy plastic case. This ensures that users always have a complete measuring system at hand – ideal for mobile use and quick commissioning on site.
| Scope of Delivery | |||
|---|---|---|---|
| 1x MultiSystem 5070 | 1x USB cable | 2x MINIMESS® direct connectors 1620 | 1x USB stick |
| 2x HySense® PR 400 pressure sensors | 1x power supply unit | 2x measuring cables standard 5 m | 1x HYDROcom6 ADVANCED software |
| 1x plastic case | |||
| Measuring Range HySense® PR 400 Pressure Sensor |
Code | Measuring Range HySense® QT 500 Flow Sensor |
Code | |||
|---|---|---|---|---|---|---|
| 0 … 600 bar | 18 | 600 l/min | 72 | |||
| 0 … 400 bar | 15 | 300 l/min | 71 | |||
| 0 … 250 bar | 17 | |||||
| 0 … 60 bar | 21 | |||||
The MultiSystem 5070 ppTQ Set is a comprehensive complete package for mobile measurement and analysis of pressure, temperature, and flow. It includes the MultiSystem 5070 device, two HySense® PR 400 pressure sensors (measuring range selectable between 0…60 bar and 0…600 bar), one HySense® TE 300 temperature sensor, and one HySense® QT 500 flow sensor (either for 300 l/min or 600 l/min). The set is complemented by four measuring cables, two MINIMESS® direct connectors, a power supply, USB cable, USB stick, the powerful HYDROcom6 ADVANCED software, and a robust plastic case.
This set thus offers a flexible solution for a wide range of measurement tasks in hydraulics, maintenance, and service – ideal for users who want to record multiple physical quantities precisely and conveniently with just one system.
| Scope of Delivery | |||
|---|---|---|---|
| 1x MultiSystem 5070 | 1x Power supply | 2x MINIMESS® direct connector 1620 | 1x USB cable |
| 2x HySense® PR 400 pressure sensor | 4x Measuring cable standard 5 m | 1x HySense® TE 300 temperature sensor | 1x USB stick |
| 1x HySense® QT 500 flow sensor | 1x HYDROcom6 ADVANCED software | 1x Plastic case | |
| Parameter | Value | Remark |
|---|---|---|
| Housing | PC+ABS+20GF plastic | |
| Weight | 1,072 g | |
| Protection class | IP40 | |
| CE marking | Complies with Directive 2014/30/EU (EMC); Complies with Directive 2014/68/EU (Pressure Equipment Directive); Complies with Directive 2011/65/EU (RoHS) |
|
| Internal power supply | Lithium-ion, 7.2 V / 6.2 Ah | |
| External power supply | 24 VDC / 2A | |
| Dimensions | ~270 x 140 x 69 mm (L x W x H) | |
| Interfaces | USB, USB host, RS232 interface, 2 x CAN | |
| Ambient temperature | -10 °C – 50 °C | |
| Relative humidity | 0 – 80% (non-condensing) | |
| Storage temperature | -20 °C – 50 °C | |
| Measurement display | 5 digits / 5″ color TFT | QVGA (320 x 240) |
| Trigger | 4 channels for start/stop; AND/OR links; Time-based triggering |
|
| Sampling rate | adjustable from 100 μs to 999 min | |
| Number of signal inputs | 8 | 6 x AD, 2 x switchable |
| Signal input measurement rate | 0.1 ms | |
| Digital low-pass filter | 5 kHz, 50 Hz | |
| Number of digital inputs | 1 | Electrically isolated |
| Digital input measurement rate | 1 ms | |
| Number of digital outputs | 1 | Max. load Ub/10mA |
| Digital output response time | ≤ 1 ms | |
| Number of CAN inputs | 32 | CAN, CANopen, SAE J1939 |
| Storage medium | SD card 4 GB | microSD card |
| Number of measurement series | 500 | |
| Measurement value memory | max. 24 MB / measurement series max. 6 million measured values |
|
| Average charging time | < 2 h | at 25 °C and 90% state of charge |
| Battery powered operation time | 10 h | 8 sensors with 12 mA load |
| Optimal storage conditions | 20…60% | 20°C, 15…65% r.h. |
| Recommended charging cycle when not in use | 6 months | |
| Backup battery | CR2032 | |
| Measurement rate | Analog inputs max. 10 kHz Frequency inputs 0.25 Hz … 20 kHz |
|
| Measurement accuracy | Analog ± 0.10% of full scale, Digital ± 0.02% of measured value (20 ns) |
| Parameter | Min | Typ. | Max | Unit | Remarks |
|---|---|---|---|---|---|
| Input signal current | 0 | 20 | mA | ||
| Input impedance current | 113Ω/35nF Channel 1-6 113Ω/100nF Channel 7-8 |
||||
| Error limit 20mA signal input | ±0.1 | % FS | |||
| Input signal voltage | -10 | 10 | V | ||
| Input impedance voltage | 8.8kΩ/35nF Channel 1-6 8.8kΩ/100nF Channel 7-8 |
||||
| Error limit 10V signal input | ±0.1 | % FS | |||
| Input signal frequency | 0.25 | 20000 | Hz | Direction detection 45° to 135° with 5V TTL | |
| Input impedance f-signal | 100kΩ/33nF | ||||
| Error limit f-signal | ±0.02 | % MV | |||
| Signal digital input (high) | 2 | 30 | VDC | ||
| Temperature error | ±0.005 | %/°C | Only for analog inputs | ||
| Power supply sensor | 14.4 | 15.1 | VDC | Current limit 200 mA | |
| Power supply CAN / MultiXtend | 14.6 | 15 | VDC | 800 mA | |
| Parameter | Min | Max | Unit | Condition |
|---|---|---|---|---|
| Supply voltage | 11 | 26 | VDC | Current limit 2A |
| Storage temperature | -20 | 50 | °C | |
| Operating temperature | -10 | 50 | °C | |
| Charging temperature | 10 | 40 | °C | |
| Relative humidity | 0 | 80 | % r.h. | Not condensing |
| Parameter | Value |
|---|---|
| Casing | PC+ABS+20GF plastic |
| IP protection class | IP40 |
| Dimensions | 270 x 140 x 69 mm |
| Weight | 1.072 kg |
| Microsoft Windows |
Windows 71 Windows 8.1 Windows 10 |
|---|---|
| Hydrotechnik |
HYDROcenter HYDROlink 6 HYDROcom 6 |
¹ Requires device driver available from the Hydrotechnik website.
The MultiSystem 5070 offers a wide range of connections and interfaces for versatile measurement and diagnostic tasks.
8 measurement channels: six analog inputs, two switchable between analog or frequency pulse including direction detection
Digital input/output: for trigger- or counter-based signal processing
Two CAN interfaces: separate ports for J1939/CANopen, each with up to 32 special channels
USB Device & USB Host: connection to PC or USB storage, recognized as a removable device
RS‑232 interface: classic interface for data transmission and device control
This wide variety of interfaces makes the MultiSystem 5070 an extremely flexible and powerful tool for a wide range of measurement applications.
| Number | 8 (K1 to K6) |
|---|---|
| Signal input | switchable 0/4 … 20 mA; 0/2 … 10V; 0 … 10V; 0.5 … 4.5V; 1 … 5V |
| Resolution | 13-bit analog/digital converter (12-bit + sign) |
| Measurement rate | max. 10,000 measured values / sec. |
| Filter function | Input filter 50 kHz (dynamic mode) |
| IIR filter | switchable: 5 kHz (standard mode) / 50 Hz (attenuated mode) |
| Connector | 6-pin device connector |
| Protection class | IP40 |
| Pin | Function | Ri | Ci | Limitation | Protection |
|---|---|---|---|---|---|
| 1 | Signal I [mA] | 113 Ω | 35 nF | 5VDC | Transil diode |
| 2 | Ground | – | – | – | – |
| 3 | Uba | – | – | 100 mA | Current limitation |
| 4 | Signal U [V] | 8.8 kΩ | 35 nF | ± 15VDC | Transil diode |
| 5 | Shield | – | – | – | – |
| 6 | ISDS | – | – | – | – |
*) Supply voltage with mains operation 15 V
| Number | 2 (K7, K8) frequency/counter inputs with selectable direction detection or analog inputs |
|---|---|
| Signal input (frequency mode) | 5 – 30VDC 0.25 Hz – 20 kHz |
| Signal input (analog mode) | switchable 0/4 … 20mA; 0/2 … 10V; 0 … 10V; 0.5 … 4.5V; 1 … 5V |
| Resolution (analog mode) | 13-bit analog/digital converter (12-bit + sign) |
| Measurement rate (analog mode) | max. 10,000 measured values / sec. |
| Filter function (frequency mode) | adjustable period duration measurement for mean value calculation |
| Filter function (analog mode) | input filter 50 kHz (dynamic mode) |
| IIR filter (analog mode) | switchable: 5 kHz (standard mode) / 50 Hz (damped mode) |
| Connector | 6-pin device connector |
| Protection class | IP40 |
| Pin | Function | Ri | Ci | Limit | Protection |
|---|---|---|---|---|---|
| 1 | Signal (f) | 100 k | 33 nF | 15VDC | VDR transil diode |
| 2 | Ground | ||||
| 3 | Uba | 100 mA | PTC | ||
| 4 | Direction signal | 100 k | 33 nF | 15VDC | VDR transil diode |
| 5 | Shield | ||||
| 6 | ISDS |
*) Supply voltage with mains operation 15 V
| Pin | Function | Ri | Ci | Limit | Protection |
|---|---|---|---|---|---|
| 1 | Signal I [mA] | 110 Ω | 32 nF | 5VDC | Transil diode |
| 2 | Ground | ||||
| 3 | Uba) | 100mA | Current limitation | ||
| 4 | Signal U [V] | 22 kΩ | 32 nF | ± 15VDC | Transil diode |
| 5 | Shield | ||||
| 6 | ISDS |
a) Supply voltage with mains operation 15 V
Pins of the digital input/output.
The digital signal input is galvanically isolated.
| Pin | Function | Limitation | Protection |
|---|---|---|---|
| 3 | Signala) | 30VDC | VDR transil diode |
| 4 | Ground |
a) 1 mA constant current
Sockets of the digital input/output.
| Pin | Function | Limitation | Protection |
|---|---|---|---|
| 1 | Ground | ||
| 2 | Signal | Ub/10mA | VDR Transil diode |
8-pin M12x1
| Pin | Function |
|---|---|
| 1 | Ground |
| 2 | Power supply for MultiXtend or CAN sensorsa) |
| 3 | DTR |
| 4 | CAN_H |
| 5 | TXD |
| 6 | RTS from PC (input) |
| 7 | CAN_L |
| 8 | RXD |
a) ~14.6 to 15V, max. 800mA
5-pin M12x1
| Pin | Function |
|---|---|
| 1 | Shield/Housing |
| 2 | Power supply for measuring devicea) |
| 3 | Ground |
| 4 | CAN_H |
| 5 | CAN_L |
a) The measuring device automatically switches on the power supply via the CAN 2 socket. The device is then used for data recording only.
USB Type A: Host interface
USB Type B: Device interface
