- Simultaneous monitoring of up to 3 areas with any probes from the GRAETZ probe program
- Up to 3 measuring channels
- An illuminated LC display is assigned to each measuring channel, on which the measured values are displayed
- When using gamma probes, the dose rate is shown on the LC display in Sv/h
- When using end window probes (α-/β-measurements) or NaI scintillation probes (β-/γ-measurements), the measured value is displayed in Ips
- For each channel 4 freely programmable dose rate warning thresholds in the entire measuring range of the respective connected gamma probe
- The measuring range switchover within a channel takes place automatically. If a measuring channel triggers a dose rate alarm, both an optical and an acoustic warning is given at the WS05C by the integrated warning light column
- In the standard version: Green for “Ready for operation”, Orange for “Warning threshold exceeded”, Red for “Error message” (e.g. probe failure).
- Red LED above the display indicates which measuring channel has triggered an alarm
- An RS-232 interface is available for connecting a measuring channel to a PC
- Relay output for controlling an additional external optional warning light column for each measuring channel
- Potential-free relay output for each measuring channel (switching capacity max. 24 V, 20 mA)
- Acoustic alarm with triggered warning threshold occurs when the door to the monitored room is open, a motion detector or a light barrier has been activated
- Counter for irradiation time
- Operating hours counter
- Rotating beacon
- Integration of already existing warning devices
- External warning light columns (optical/acoustic)
- Probe cable, extension up to 100 m (standard length: 1.25 m)
- Emergency power supply (300 W) for uninterrupted operation of WS05C in case of power failure
- Special designs possible on request
 Datasheet |
The GRAETZ WS05C room monitoring monitors represent an innovative solution for monitoring radiation levels in up to three areas simultaneously. With the flexibility to connect any probe from the extensive GRAETZ probe program, these devices offer comprehensive and customizable monitoring for a wide range of applications and environments.
Main Features and Functions:
- Multi-zone Monitoring: The WS05C monitors enable simultaneous monitoring of up to three areas, each with up to three measuring channels. This increases the efficiency and scope of radiation monitoring in complex facilities or at multiple locations.
- Display and Alerting: Each measuring channel has its own illuminated LC display that clearly shows the measured values. For gamma probes, the dose rate is displayed in Sv/h, while for end-window probes (α-/β-measurements) and NaI scintillation probes (β-/γ-measurements), the measurement value is displayed in pulses per second (Ips).
- Programmable Warning Thresholds: Up to four freely programmable dose rate warning thresholds can be set for each channel, across the entire measurement range of the connected gamma probe, allowing high flexibility in adapting to specific safety requirements.
- Automatic Range Switching and Warning System: The switching of the measurement range within a channel occurs automatically. If a channel triggers a dose rate alarm, an optical and acoustic warning is issued at the WS05C, supported by the integrated warning light column.
- Advanced Connectivity and Optional Functions: The monitors feature an RS-232 interface for PC connection. Options include relay outputs for controlling additional external warning light columns, potential-free relay outputs, acoustic alarms, counters for irradiation time, operating hours counters, revolving lights, and the integration of existing warning devices.
- Expandability: The monitors offer the possibility of extending the probe cables up to 100 m (standard length: 1.25 m) and an uninterruptible power supply for continuous operation of the WS05C in case of power failure.
Thus, the GRAETZ WS05C room monitoring monitors are a highly flexible and reliable solution for monitoring and controlling radiation levels, adapted to the individual needs and safety requirements in various areas and applications.