Recycling

• Reliable and cost-effective
• Design per EN 837-1 or ASME B40.100
• Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"]
• Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]

Datasheet

• Long service life, robust
• Cost-effective and reliable
• To combine with WIKA diaphragm seals
• German Lloyd approval
• Scale ranges up to 0 … 1,000 bar

Datasheet

User Manual

• Good/bad indication through parameterisable digital display (red/green)
• Compact size enables easy installation in narrow spaces
• Optimised design makes OEM machine integration easier
• Designed for rough demands of up to 50 g shock and -40 ... +125 °C [-40 ... +257 °F]

Datasheet

User Manual

• Adjustable switch hysteresis
• Setting ranges: 0.2 … 2 bar [3 ... 30 psi] to 30 ... 320 bar [450 ... 4,600 psi] and -0.85 ... -0.15 bar [-25 inHg ... -5 inHg]
• Non-repeatability of the switch point: ≤ 2 %
• Switching functions: Normally closed, normally open or change-over contact
• Media: Compressed air, neutral and self-lubricating fluids and neutral gases

Datasheet

• Zero point setting in front
• Special connection location on request
• Low scale ranges from 0 ... 25 mbar

Datasheet

User Manual

• Measuring ranges from 0 … 0.05 to 0 … 1,000 bar
• Non-linearity 0.25 % or 0.5 %
• Output 4 ... 20 mA, DC 0 ... 10 V, DC 0 ... 5 V and others
• Electrical connection: Angular connector form A and C, circular connector M12 x 1, cable outlet 2 m
• Process connection G ¼ A DIN 3852-E, ¼ NPT and others

Datasheet

User Manual

• Wetted parts from stainless steel
• Resistant to all common refrigerants
• Special case design for the best possible condensation tightness
• Private labelling possible

Datasheet

User Manual

• Industry 4.0-ready IO-Link sensor improves connectivity and diagnostics
• Designed for rough demands of up to 1,000 g shock and -40 ... +125 °C [-40 ... +257 °F]
• Optimised design makes OEM machine integration easier
• Multicolour 360° LED status display simplifies troubleshooting and localisation

Datasheet

User Manual

• Measuring ranges from 0 ... 6 bar to 0 ... 600 bar
• Non-linearity 0.5 %
• Standard industrial signals
• Electrical connection: Angular connector form A and C, circular connector M12 x 1, Metri-Pack series 150, cable outlet 2 m unshielded or shielded
• Many internationally customary process connections

Datasheet

User Manual

• Measurement ranges 0 ... 3 kg up to 0 ... 250 kg
• Made of aluminum alloy
• High accuracy
• High side load tolerance
• Simple structure, easy to install

Datasheet

User Manual

• Measuring ranges 0 … 20 kg up to 0 ... 500 kg
• Made of aluminum
• High accuracy
• Insensitive to side and corner loads
• Simple structure, easy to install

Datasheet

User Manual

• Measuring ranges 0 … 0.3 kg up to 0 ... 10 kg
• Made of aluminum alloy
• High accuracy
• Insensitive to side and corner loads
• Simple structure, easy to install

Datasheet

User Manual

• Measuring ranges 0 … 500 kg up to 0 ... 10.000 kg
• Steel/stainless steel
• High long-term stability
• High side load tolerance

Datasheet

• Measuring ranges 0 … 5 kg up to 0 ... 500 kg
• Completely welded bellows
• Protection class IP68

Datasheet

• Measuring ranges 0 ... 2 kN up to 0 ... 100 kN
• Corrosion-resistant stainless steel design
• Integrated amplifier
• High long-term stability, high shock and vibration resistance
• Good reproducibility, simple installation

Datasheet

User Manual

• Accuracy class 2 per EN 13190
• Nominal size 63, 80, 100 and 160
• Scale ranges from -30 ... +200 °C

Datasheet

User Manual

• Very compact design, high vibration resistance and fast response time
• With direct sensor output (Pt100, Pt1000 in 2-, 3- or 4-wire connection) or integrated transmitter with 4 ... 20 mA output signal
• Integrated transmitter is individually parameterisable with free-of-charge WIKAsoft-TT PC configuration software
• Sensor element with accuracy class A per IEC 60751

Datasheet

User Manual

• Scale ranges from -30 ... +500 °C
• Large choice of nominal sizes from 25 ... 160 mm
• Case and stem from stainless steel
• 5 different connection designs

Datasheet

User Manual

• Measuring ranges from -50 ... +250 °C [-58 ... +482 °F]
• Very high vibration resistance
• Compact design
• Electrical connection via plug connection

Datasheet

User Manual

• Intuitive measuring menus with a responsive smart-touch display
• Incl. O2 and H2-compensated CO sensor up to 30,000 ppm, NO can be retrofitted
• Integrated fine draft pressure measurement
• On-site documentation and report dispatch by e-mail
• Versatile probes and fast probe changes by the user
• Magnetic mounting for fixing the device in place
• Efficient, wireless parallel measurement with up to four testo Smart Probes simultaneously
• Practical second screen function and easy data integration into user-specific software

Datasheet

User Manual

• Intuitive measuring menus with a responsive smart-touch display
• Incl. O2 and H2-compensated CO sensor up to 30,000 ppm, NO sensor up to 3,000 ppm; integrated fine draft pressure measurement
• Integrated fine draft pressure measurement
• On-site documentation and report dispatch by e-mail
• Versatile probes and fast probe changes by the user
• Magnetic mounting for fixing the device in place
• Efficient, wireless parallel measurement with up to four testo Smart Probes simultaneously
• Practical second screen function and easy data integration into user-specific software

Datasheet

User Manual

• Intuitive measuring menus with responsive smart-touch display
• Incl. O2 and H2-compensated CO sensor up to 30,000 ppm (NO sensor can be retrofitted); integrated fine draft pressure measurement
• Integrated fine draft pressure measurement
• On-site documentation and sending reports by e-mail
• Versatile probes and fast probe changes by the user
• Magnetic mount for fixing the device in place
• Efficient, wireless parallel measurement with up to four testo Smart Probes at the same time
• Practical second-screen function and easy data integration into user-specific software

Datasheet

User Manual

• Printer Kit - including analyser with probe, testo Bluetooth printer, case, and power supply.
• User-Friendly Interface - Intuitive colour display with clear menu navigation for simple operation.
• Smart Connectivity - Bluetooth connection with testo Smart App for additional functionality and instant reporting.
• Durable and Practical Design - with integrated kink-resistant hose & 30-second auto-zeroing.

Datenblatt

Bedienungsanleitung

• Dual-beam infrared gas detector for reliable hydrocarbon detection
• Intelligent heated optics for stable performance in high humidity and extreme temperatures
• Fast response time of approximately 4 seconds
• High reliability with reduced maintenance requirements
• Flexible mounting options: wall, pipe or duct installation
• Multiple display options including local and remote displays
• Standard 4–20 mA and RS485 (Modbus) with optional HART® communication
• 5-year manufacturer warranty for long-term reliability

Datasheet

User Manual

• Dual-channel gas detector designed for battery energy storage systems
• Detects hydrogen (H₂), carbon monoxide (CO) and methane (CH₄)
• Simultaneous monitoring of two gases with flexible sensor configuration
• High-resolution OLED display with intuitive user interface
• Replaceable smart sensors for easy maintenance and reduced downtime
• Analog, relay and RS485 Modbus outputs for easy system integration
• Integrated audible and visual alarm functions
• Compact, rugged IP65 enclosure for harsh environments

Datenblatt

Bedienungsanleitung

• Compact gas detector for car parks and indoor air monitoring
• Durable polycarbonate enclosure with IP55 protection rating
• RS485 communication interface for easy system integration
• Power supply 12–24 VDC
• Operating temperature range from −20 °C to +50 °C
• Suitable for CO and NO₂ monitoring in parking facilities
• Compliant with EMC standards and parking garage regulations
• Compact design for easy wall mounting

Datasheet

• Compact fixed gas detector for combustible and toxic gas monitoring
• Supports catalytic, electrochemical and infrared sensor technologies
• Durable polycarbonate enclosure with IP55 protection rating
• 4–20 mA analog output with optional RS485 communication interface
• Optional relay board for alarm and fault signalling
• Operating temperature range from −20 °C to +60 °C depending on sensor
• Compact design for easy wall or equipment mounting
• Compliant with EMC standards EN 61000 and EN 50270

Datasheet

• Compact infrared gas detector for CO₂ and refrigerant monitoring
• Supports multiple refrigerants including R134a, R404A, R407C, R410A and others
• Infrared sensor technology for reliable and long-life gas detection
• Power supply 12–24 VDC or 90–240 VAC
• RS485 communication interface for easy system integration
• Compact flush-mount enclosure made from polycarbonate
• Operating temperature range from −10 °C to +50 °C
• Compliant with relevant EMC and refrigeration safety standards

Datasheet

• Gas detector for safe areas designed to detect flammable, toxic and refrigerant gases
• MPS™ sensor technology providing accurate multi-gas detection without sensor poisoning
• No calibration or scheduled maintenance required
• Visual and audible alarms with multi-colour LED ring and internal buzzer
• 4–20 mA analog output, RS485 Modbus communication and relay outputs
• Optional remote sensor head and data logging capability
• Ideal for machine rooms, refrigeration systems, laboratories and battery storage systems
• Compliant with standards including EN 378, EN 14624 and ISO 5149

Datasheet

• Compact fixed gas detector for combustible and toxic gas monitoring
• Supports catalytic, electrochemical and infrared sensor technologies
• Robust aluminium enclosure for industrial environments
• 7-segment display for clear status and measurement indication
• 4–20 mA analog output with optional RS485 communication interface
• 3 integrated relay outputs for alarm and fault signalling
• Operating temperature range from −40 °C to +60 °C depending on sensor
• SIL2 hardware with SIL3 software support

Datenblatt

• Compact fixed gas detector for combustible and toxic gas monitoring
• Supports catalytic, electrochemical and infrared sensor technologies
• Robust aluminium enclosure for industrial environments
• IP55 protection rating for use in demanding conditions
• 4–20 mA analog output with optional RS485 communication
• Optional relay outputs for alarm and fault signalling
• Operating temperature range from −40 °C to +60 °C depending on sensor
• SIL2 hardware with SIL3 software support and ATEX approval (model dependent)

Datasheet

• Fixed gas detector for combustible and toxic gas monitoring
• Rugged aluminium die-cast enclosure with chemically resistant epoxy coating
• IP65 protection rating for industrial environments
• 4–20 mA analog output with optional RS485 communication and HART® modem
• Optional relay board for alarm and fault signalling
• Fast response time with t90 < 60 seconds
• Operating temperature range from −40 °C to +65 °C depending on sensor
• ATEX and IECEx certified for hazardous areas

Datasheet

• Explosion-proof UV/IR flame detector for rapid detection of hydrocarbon fires
• Multi-spectrum UVIR technology for long detection distances and high false alarm immunity
• Fast flame detection at distances exceeding 40 m within seconds
• Microprocessor-controlled heated optics for reliable operation in snow, ice and condensation
• Continuous optical self-test ensures reliable device operation
• Approved for hazardous areas (FM, ATEX, IECEx and more)
• Easy integration via standard outputs such as 0–20 mA, relays and HART®
• Ideal for refineries, petrochemical plants, tank farms and LNG/LPG facilities

Datasheet

User Manual

• Multi-spectrum IR flame detector specifically designed for hydrogen flame detection
• Extremely fast response time of approximately 4 seconds
• Detects a 36-inch hydrogen flame at distances up to 40 m
• Heated optics prevent condensation, ice or water build-up on the lens
• Automatic optical self-test verifies lens cleanliness and electronics
• High immunity to false alarms through optimized hydrogen flame detection
• FM approved for use in hazardous environments
• 5-year manufacturer warranty for long-term reliability

Datasheet

User Manual

The Multiscan++ PK from Sensitron gas detection control panel supports a maximum of 256 detectors and has been designed with car parks in mind. It is compliant with the EN 50545-1 standard, which defines the requirements for the detection of CO and NO₂ in car parks and tunnels, helping you easily keep track of gas levels in these confined areas.

Datasheet

• Long-distance gas monitoring with laser-based detection technology
• Non-contact measurement reduces maintenance and sensor contamination
• High accuracy with minimal cross-interference from other gases
• No false alarms due to selective wavelength absorption
• Ultra-fast response time compared to catalytic or electrochemical sensors
• Long service life with significantly reduced maintenance requirements
• Reliable leak detection over large monitoring areas
• Extended battery life enabling long-term field operation

Datasheet

User Manual

• Precise measurement locations – measurement values tied to a captured image (measuring point, value and time stamp)
• Reliability – little maintenance with self-check or automatic calibration on start-up
• Remote detection – searching range of 30m removes safety risk for operators
• Quick response – allows for swift searching
• Persuasive evidence – laser co-axis digital camera records photos and videos and stores them on a cloud server
• User friendly – point and shoot technology with little or no training
• Clear laser – green laser pointer is visible in bright sunshine

 

Datasheet

User Manual

• Loud internal audible alarm
• Clear system integrity indication
• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy-chained
• Variable alarm configurations
• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

Datasheet

User Manual

Crowcon’s enhanced Gasmaster gas detector control panel has a modular design meaning users only need purchase the required number of input modules. It can easily be extended by adding more modules at a later date.

Datasheet

User Manual

• All day-to-day functions are available from the front panel – push buttons for simple operation
• Unique bar-graph display per channel – provides instant representation of gas concentrations
• Common alarm LEDs on the display card – the whole rack status can be checked at a glance.

Not available anymore.

Datasheet

User Manual

There are 3 addressable gas detection controller options, all with identical functionality but with different channel input capabilities.

• GM16: 1-16 Channel inputs
• GM64: 1-64 Channel inputs
• GM128: 1-128 Channel inputs

All available as 19” rack mounted, with enclosure options available for GM16 & GM64. All of our addressable gas detection controllers are modular, so the controller can be configured exactly to requirements. Only include what is needed for the application to reduce complexity and cost.

Datasheet

User Manual

The Multiscan++MED control panel has been purposely designed and certified to meet with the requirements of the marine industry and can manage and monitor up to 64 gas detectors.

Datenblatt

The Multiscan++ S2 from Sensitron is a SIL2 certified, advanced multifunctional gas detection control panel designed for maximum flexibility. Capable of monitoring up to 256 gas detectors, it also has a range of self-testing facilities to take place to detect and localise possible failures so you can be confident your site is always protected.

Datenblatt

Vortex is our most flexible gas controller package that can be customised to meet your site requirements, however complex, without the need for extensive cabling.

Datasheet

User Manual

Vortex FP and Vortex FP Compact are ATEX certified Exd Flameproof gas detector control panels for use in Zone 1 or Zone 2 hazardous areas such as on offshore production platforms or within refineries.

Datasheet

User Manual

User Manual

• Fixed gas detector for combustible and toxic gas monitoring
• Supports catalytic and electrochemical sensor technologies
• Rugged aluminium die-cast enclosure with chemically resistant coating
• IP65 protection rating for industrial environments
• 4–20 mA analog output with optional RS485 communication
• Optional relay outputs for alarm and fault signalling
• Operating temperature range from −40 °C to +60 °C
• Certified according to ATEX, IECEx and EMC standards

Datasheet

The SMART S-MS 3A is a SIL2 certified fixed gas detector ideal for flammable and toxic gas detection. 1

Datasheet

• Fixed gas detector for combustible, toxic and oxygen gases
• Supports catalytic, electrochemical and infrared sensor technologies
• Rugged aluminium die-cast enclosure with IP65 protection rating
• 7-segment display with status LEDs for clear status indication
• 4–20 mA analog output with optional RS485 communication
• Optional relay outputs for alarm and fault signalling
• Operating temperature range up to −40 °C to +60 °C
• ATEX, IECEx and EMC certified with SIL2/SIL3 capable safety

Datasheet

• Robust fixed gas detector for combustible hydrocarbon gases
• Aluminium die-cast enclosure with chemically resistant epoxy coating
• IP65 protection rating for use in industrial environments
• Analog 4–20 mA output with RS485 communication interface
• Optional relay outputs for alarm and fault signalling
• Fast response time with t90 < 60 seconds
• Operating temperature range from −40 °C to +60 °C
• Certified according to ATEX, IECEx, MED and EMC standards

Datasheet

• Independently tested to EN50379. Meets the requirements of BS7967 and Gas Safe TB143
• Longlife sensors lasting up to 6 years
• Dilution to 30,000ppm CO
• Optional NO sensor upgrade

Datasheet

• testo 300 flue gas analyzer with O₂and CO sensor up to 4,000 ppm (0633 3002 78)
• USB mains unit, including cable (0554 1105)
• Compact basic flue gas probe, 180 mm; Ø 6 mm; Tmax. 500°C; 1.5 m hose; including cone for fixing (0600 9740)
• 1 x testo 510i Smart probe manometer (0560 1510)
• 2 x testo 115i Smart probe pipe clamp thermometers (0560 2115 02)
• testo Bluetooth® connector (0554 3004)
• soft-case style Instrument bag (0516 3001)

Datasheet

User Manual

• Process control (chemical industry) 
• Process optimization (steel industry)
• Safety monitoring, e.g. measuring minimum or maximum concentration limit for oxygen in explosive proof environment
• Suitable for use in SIL 1 safety systems to 61508/IEC 61511
• Combustion control (boilers, municipal waste incinerators)

User Manual

• Little installation effort
• Minimum maintenance requirements
• Extremely rugged design
• High long-term stability through built-in, maintenance-free reference gas cell, field calibration is unnecessary
• Real-time measurements

Datasheet

• High immunity to false alarms for reliable flame detection
• Wide field of view of 100° (horizontal and vertical)
• Low power consumption
• High-speed response time
• Standard 4-wire connection
• 4–20 mA output (sink or source, 3–4 wire configuration)
• RS-485 Modbus communication interface
• Automatic and manual built-in self-test (BIT)
• User-programmable functions configurable via PC or handheld device
• MTBF greater than 100,000 hours
• 3-year manufacturer warranty

Datasheet

User Manual

User Manual

• Explosion-proof multi-spectrum IR flame detector for reliable hydrocarbon fire detection
• Long detection range with high immunity to false alarms
• Continuous optical self-test without reflector ensures reliable operation
• Microprocessor-controlled heated optics for operation in snow, ice and condensation
• Hazardous area approvals including FM, ATEX, IECEx, INMETRO and PESO
• Adjustable sensitivity levels for flexible applications
• Easy integration via standard outputs such as 0–20 mA, relays and HART®
• SIL2 capable with a 5-year manufacturer warranty

Datasheet

User manual

User manual

• Portable multi-gas detector for simultaneous monitoring of up to 4 gases
• Detects more than 15 flammable gases simultaneously with a single calibration
• Extended battery life of up to 35 hours for longer work shifts
• Large backlit display with 180° flip function for easy readability
• Rugged design with 4 m drop protection and IP65 / IP67 rating
• ATEX Zone 0 and UL Class 1 Division 1 certified for hazardous environments
• Traffic-light status indicator for quick overview of device and compliance status
• Powerful 95 dB audible alarm with LED visual and vibration alerts

Datasheet

User manual

• Simultaneous measurement of NO and NO2 with subsequent compilation.
• NO2 converters or CLD analyzers are therefore not required. This means:
  - Lower maintenance effort (no converter function check)
  - Reduced operating costs because no additional equipment is required, such as an ozone generator and the like 
• Measurement in the UV range
  - Measurement not effected by H2O and CO2
  - Very low SO2 and NO measuring ranges possible 
• UV Resonance Absorption Spectrometry (UVRAS)
  - Measurement of very low NO concentrations: Measuring range 10 ppm
  - Very low cross-sensitivity to other gases 
• Very long service life of the UV light source
• Low drift and high stability through four-channel measuring method with double quotient calculation
• True reference measurement for drift-free, stable measurements
• All modules “temperature controlled,” regardless of ambient temperature fluctuations
• Optional calibration device
  - Filter wheel with test cells that can be swiveled into the beam path for calibration; no test gases required
  -Calibration: manual or automatic

Datasheet

• Highly cost-effective because calibration gases are not required (AUTOCAL with ambient air, depending on the measuring component)
• High selectivity due to multilayer detectors e.g. low cross-sensitivity to water vapor
• Cleanable cuvettes: Cost savings through further use in case of contamination
• Menu-guided operation in plain text
• Open interface architecture (RS 485, RS 232; PROFIBUS, SIPROM GA): Simplified process integration; remote operation and control

Datasheet

• Wide range of applications: in up to 100% H2O steam, for ultra-pure gas applications, for high-boiling components (up to 200 °C), in the presence of corrosive gases (with prefilter)
• Extremely low cross-sensitivity to interfering gases 
• Low consumption of combustion air 
• Low influence of oxygen on measured value 
• Warning and fault messages; in case of combustion gas failure, flame extinction, and pump and filter faults

Datasheet

• Universally applicable hardware basis 
• Integrated correction of interference gas, no external calculation required 
• Open interface architecture (RS 485, RS 232, PROFIBUS) 
• SIPROM GA network for maintenance and service information (optional) 
• Electronics and analyzer part: gas-tight separation, purging is possible, IP65, long lifetime even in harsh environments (field device)

Datasheet

• Short T90 time thanks to micromechanical Si sensor 
• Universally applicable hardware basis, highly dynamic measuring range (e.g., 0 to 1%, 0 to 100%, 95 to 100% H2)
• Integrated interference gas correction, no external calculation required 
• Open interface architecture (RS 485, RS 232, PROFIBUS) 
• SIPROM GA network for maintenance and service information (optional)

Datasheet

• High degree of linearity 
• Compact design 
• Open interface architecture (RS 485, RS 232, PROFIBUS) 
• SIPROM GA network for maintenance and service information (optional)

Datasheet

• Integrated pump for reference gas delivery (optionally for ambient air, for example) 
• High degree of linearity 
• Compact design 
• Physically suppressed zero point possible

Datasheet

• Paramagnetic alternating pressure method: Small measuring ranges (0 to 0.5% or 99.5 to 100% O2), absolute linearity
• Detector element has no contact with the measuring gas: can be used under “harsh conditions,” long service life 
• Physically suppressed zero point by suitable reference gas selection (air or O2), such as 98 to 100% O2 for purity monitoring / air separators
• Open interface architecture (RS 485, RS 232, PROFIBUS) 
• SIPROM GA network for maintenance and service information (optional)

Datasheet

• Corrosion-resistant materials in the gas channel (optional): Measurement possible in highly corrosive measuring gases 
• Cleanable measuring chambers: Cost savings thanks to further use in case of contamination 
• Open interface architecture (RS 485, RS 232, PROFIBUS) 
• SIPROM GA network for maintenance and service information (optional)

Datasheet

• High selectivity thanks to two-layer detector and optical coupler: reliable measurements even in complex gas mixtures
• Low detection limits: Measurements at low concentrations
• Corrosion-resistant materials in the gas channel (optional): Measurement possible in highly corrosive measuring gases
• Cleanable analysis cuvettes: Cost savings thanks to further use in case of contamination
• Electronics and physics: Gas-tight separation, purging is possible, IP65: Long service life even in harsh environments

Datasheet

• Ideal for binary gases
• Integrated interference correction, no external calculation necessary
• High measuring range dynamics
• Low detection limits in the measuring range of 0 to 0.5% with hydrogen
• T90 time < 2.5 seconds
• Maximum ambient temperature 50 °C
• Easy-to-use, thanks to Plug & Measure
• Ready for Industry 4.0

Datasheet

• Long service life, since the microflow sensor does not come into contact with the sample gas and therefore cannot corrode
• Low susceptibility to faults
• Vibration compensation
• T90 time 1.9 seconds
• Maximum ambient temperature 50 °C
• Small measuring ranges (0 to 0.5% or 99.5 to 100% O2)
• Physically suppressed zero point, such as 98 or 99.5 to 100% O2
• Easy-to-use, thanks to Plug & Measure
• Ready for Industry 4.0

Datasheet

• High measuring precision in complex gas mixtures
• Low detection limits
• Low maintenance costs thanks to on-site cleaning of the analysis chambers
• Simplified interfering gas measurement
• Preventive maintenance function
• High selectivity due to two-layer detector
• Easy-to-use, thanks to Plug & Measure
• Ready for Industry 4.0

Datasheet

In addition to flexible modules, the innovative SIPROCESS GA700 series also includes a new housing type: the Ex d field device with pressure-resistant enclosure. It contains a field operating device consisting of an Ex d casing with attached Ex e connection housing plus a connected Ex d field module.

The new SIPROCESS GA700 series of gas analyzers makes it possible to combine up to two modules in one housing: in either a wall-mounted housing or in a 19" rack housing with three different height units, depending on individual requirements.

Datasheet

• Rugged gas detector with ADC12 aluminium enclosure for industrial environments
• IP65 / IP66 protection rating for operation in harsh conditions
• 4–20 mA analog output with optional HART® and RS-485 Modbus RTU communication
• Integrated relays for Alarm 1, Alarm 2 and Fault
• Wide operating temperature range from −40 °C to +70 °C
• High measurement stability with ±2 % repeatability
• ATEX and IECEx certified for hazardous areas
• Approved for operation in Zone 1 and Zone 2 environments

Datasheet

• Rugged industrial gas detectors designed for hazardous environments
• Available as Flamgard Plus, TXgard Plus and TXgard-IS+
• Supports catalytic bead and electrochemical sensor technologies
• High measurement accuracy with typical repeatability of ±2 % FSD
• IP65 rated enclosures for operation in harsh industrial environments
• 3-digit LCD display with status LED or 2-line LCD depending on model
• 4-20 mA analog output with optional relays and Modbus communication
• Approved for hazardous areas (Zone 0, 1 or 2 depending on model)

Datasheet

A flameproof (Ex d) pellistor based detector with display & 4-20mA output, for hydrocarbons, hydrogen & petrol vapours.

Datasheet

TXgard Plus is a flameproof (Ex d), ATEX, IECEx certified toxic or oxygen gas detector with local LCD display. A choice of sensors are available enabling use in a wide range of applications, including water treatment, oil and gas exploration, chemical plants and steel production.

Datasheet

• Dual-beam infrared gas detector for reliable hydrocarbon gas detection
• Rugged stainless steel enclosure with IP66 protection rating
• 4–20 mA analog output with optional HART® and Modbus communication
• Optional 4-digit backlit LCD display
• Fast response time with T90 under 4 seconds
• Wide operating temperature range from –40 °C to +75 °C
• SIL2 capable according to IEC61508 / EN50402
• ATEX and IECEx certified for hazardous areas

Datasheet

• Rugged stainless steel (316) gas transmitter designed for industrial environments
• High-resolution OLED display (128 × 64 pixels) with status indicator LEDs
• Supports multiple sensor types for oxygen, toxic and flammable gases
• 4–20 mA analog output with optional HART® and RS-485 Modbus RTU communication
• Optional relays for Alarm 1, Alarm 2 and Fault
• Event logging for alarm, fault and maintenance records
• Wide operating temperature range from −40 °C to +75 °C (depending on sensor)
• ATEX and IECEx approvals with SIL2 capable functional safety

Datasheet

• Rugged fixed gas detectors designed for industrial and hazardous environments
• Multiple models (Type 1–6 and Xsafe) for different sensor and enclosure configurations
• Supports electrochemical, pellistor and thermal conductivity sensor technologies
• Up to IP65 protection rating for reliable operation in harsh conditions
• Operating temperature range from –40 °C to +150 °C depending on model
• Standard 4–20 mA output for easy integration into gas detection systems
• Certified for hazardous areas including ATEX, IECEx and UL
• Flexible installation options with multiple cable entry configurations

Datasheet

Available for detecting a range of different refrigerant gases and also sulphur hexafluoride (SF6), the F-Gas Detector can be connected to any control system that accepts an analogue signal.

Datasheet

I-Test is Crowcon’s fully automated solution for testing and verifying that your Gas-Pro and T4 are in a compliant state to carry out your daily work. Bump testing standards are getting tighter in all regions and the need for controlled bump and calibration records is a must. I-Test and the accompanying I-Test manager software makes this as easy as can be. It takes less than 1 minute to complete a bump test!

Datasheet

User Manual

With regulations driving tighter calibration routines and the requirement for daily bump testing, there is a real need for test gas. Gas detectors play a key part for people and plant safety so equipment cannot afford to be out of service.

Datasheet

The LaserMethane mini (LMm) is an innovative long-range portable detector which allows methane gas to be detected at distances of up to 100m. This enables easy access to hard-to-reach locations, such as elevated piping or locked premises, and helps keep the operator away from potential leak sources. Latest development – LMm is now available with Bluetooth connectivity. Previously only available in a ‘safe-area’ version, Bluetooth is now an available option for the ATEX approved LMm. This allows connection to an Android device using the GasViewer app delivering data storage functionality. This means that important survey data including gas level, time, date and location can be combined, saved or emailed to a central point.

Datasheet

Detective Wireless is a module that can replace interconnecting cables for Detective+. Detective Wireless will transmit gas alert signals and other alarms wirelessly between Detective units using a 433MHz signal up to 100 metres in distance.

Datasheet

Detective+ is a multi-gas temporary area monitor for use in turnaround/shutdown procedures, hot work maintenance, confined space entry work and many other utility, construction and oil and gas industry applications. Go solo or link together using Detective Net to form a perimeter, Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design make Detective+ the ideal choice for your transportable gas detection needs.

Datasheet

• Maintenance-free personal single gas detector for industrial safety applications
• Continuous gas monitoring with up to 2 years operational lifetime
• Available for hydrogen sulfide (H₂S), carbon monoxide (CO) or oxygen (O₂)
• Configurable alarm thresholds for flexible safety requirements
• Bump test warning indication and simple configuration via docking station
• Compact lightweight design with simple single-button operation
• Rugged housing with IP66 / IP67 protection for harsh industrial environments
• Real-time gas readings and countdown display for device status monitoring

Datasheet

• Compact personal single gas detector for industrial safety applications
• Rugged polycarbonate housing with IP65 protection rating
• 95 dB audible alarm, bright LED visual alarm and vibration alert
• Available for flammable gases, oxygen and toxic gases
• Rechargeable versions available for all gas types
• Simple one-button operation with easy-to-read display
• TWA and peak value display for reliable gas monitoring
• Lightweight ergonomic design for comfortable everyday use

Datasheet

The Tetra:3 multigas monitor is a compact, robust and easy-to-use diffusion based detector. Single button operation, small size and clear top-mounted display make it a favourite in the market amongst those working in demanding industrial environments, such as those in the water, telecoms, food, brewing or hydrocarbons sectors.

Datasheet

• Portable 4-gas detector for protection against CO, H₂S, combustible gases and oxygen deficiency
• Extended battery life of up to 18 hours for full work shifts
• Large backlit display with 180° flip function for easy readability
• Rugged design with 4 m drop protection and IP65 / IP67 protection rating
• ATEX and UL certified for use in hazardous environments
• Traffic-light status indicator for quick overview of device status
• Powerful 95 dB audible alarm with LED visual and vibration alerts
• Simple one-button operation – even when wearing gloves

Datasheet

• Portable multi-gas detector for monitoring up to 5 gases
• Optional integrated pump for sampling and pre-entry testing
• Large top-mounted display for quick and clear readings
• Simple single-button operation – even when wearing gloves
• Compatible with IR, PID and electrochemical sensors
• Rugged housing with IP65 / IP67 protection for harsh industrial environments
• High-capacity lithium-ion battery with more than 14 hours runtime
• Automatic reminders for bump tests and calibration

Datasheet

The Gas-Pro IR is ideal for the oil and gas industry. This personal multigas monitor can detect methane, pentane or propane using infrared (IR) sensor technology. The Gas-Pro IR is ideal for detecting potentially explosive gases where traditional, ”pellistor”, catalytic sensors will struggle – especially in a low oxygen environment.

Datasheet

• Portable multi-gas detector for monitoring up to 5 gases
• Optional integrated pump for sampling and pre-entry testing
• Large top-mounted display for easy and quick readings
• Simple one-button operation with ergonomic, hand-friendly design
• PID technology for detection of volatile organic compounds (VOC)
• Supports both diffusion and pumped operation
• Rugged housing with IP65 / IP66 protection for harsh industrial environments
• Powerful pump enables sampling from distances up to 30 m

Datasheet

• Designed specifically for tank inspection in tanks and vessels containing inert gases
• Detects combustible gases from Vol.% levels down to low % LEL concentrations
• Automatic range switching between % LEL and % Vol depending on gas concentration
• Monitors oxygen levels to support safe tank entry and system access decisions
• Tank testing mode with alarms disabled to avoid nuisance alarms at high gas concentrations
• Automatic flow plate detection with sampling possible from up to 30 m distance
• Lightweight portable device with simple one-hand operation, even when wearing gloves
• Can also be used as a personal gas detector with audible, visual and vibrating alarms

Datasheet

Air flow measurements in ducts, temperature measurements in laboratories, humidity measurements in production, pressure difference measurements in clean rooms. The testo 480 digital temperature, humidity and air flow meter comes with a wide range of optional sensors that allow you to measure, analyse and log these and a variety of other parameters with only one device

Datasheet

• In combination with testo 330-2 LL, the innovative complete solution for solid fuels, oil and gas systems.
• Unrestricted TÜV test for the limit value levels 1/2 and according to VDI 4206 Sheet 2
• Parallel measurement of fine particles, O2 und CO
• Graphic presentation of all measurement values in real time
• Especially economic in operation and maintenance
• Effortless handling and easy transport
• High-tech in a case: Measurement of all relevant values with only one probe

Datasheet

• Handy and robust Easily possible to carry to the desired application site
• Determination of soot concentration (mg/m³) as well as Filter Smoke Number (FSN) or Bosch number
• Easy one-handed operation
• Direct analysis and display of measurement values, optional on-site printout of data with Testo fast printer

Datasheet

teste 308 smoke tester, incl. rech. battery, mains unit and calibration protocol. Measuring range - 0 to 6 RZ Accuracy - 0.2 RZ Resolution - 0.1 RZ

Datasheet