Plastic Machines
Foto by Emily Bernal on Unsplash
The range of plastic processing machines is as extensive as the products they produce. While a facility for producing blown film, producing barrier films, breathable films, heavy-duty bags, adhesive tapes, or labels, differs significantly from an injection molding machine used for manufacturing children’s toys, housing parts, transparent vehicle headlights, or medical components, the fundamental function of all these machines is processing plastic granules. These are melted and shaped into the desired form. A central component in this process is the extruder screw, surrounded by heating sleeves that melt the granules and generate the necessary pressure for extrusion. The preparation process of the granules, including dedusting and drying, is essential as particles and moisture can significantly affect product quality.
Measuring instruments play a crucial role in various areas of plastic machinery:
- Closing force at the injection tool is monitored by hydraulic pressure or force sensors.
- The temperature at the injection tool and that of the plastic melt are measured by temperature sensors or thermocouples.
- System pressure is controlled by pressure transmitters, switches, or pressure gauges.
- The oil level in the tank is checked by float switches or optoelectronic switches.
- The temperature of the hydraulic oil is regulated by temperature sensors or switches.
Precise measurement and control of the melt temperature are crucial for the quality of the end product, which must be kept within tight tolerances. Adequate flowability is required for efficient filling of the injection mold, with the maximum temperature not to be exceeded to avoid material damage.
The pretreatment of the granules is as necessary as the precise temperature control of the injection molding tools by external temperature control units to ensure product quality. Our measuring instruments provide accurate, robust, and reliable solutions in all these areas to support the production of high-quality plastic products. These devices are indispensable for the safe operation of the machines and the preservation of productivity by increasing process efficiency and helping to minimize downtime.
- Measuring ranges 0 ... 1 kN to 0 ... 500 kN [0 ... 224.8 lbf to 0 ... 112,404 lbf]
- Stainless steel version (corrosion-resistant)
- Integrated amplifier
- High long-term stability, high shock and vibration resistance
- Good reproducibility, easy installation
 Datasheet |
| User Manual |
- Measuring ranges 0 ... 10 kN to 0 ... 45 kN [0 ... 2,248 lbf to 0 ... 10,116 lbf]
- Corrosion-resistant stainless steel design
- Integrated amplifier
- High long-term stability, high shock and vibration resistance
- Good reproducibility, simple installation
| Datasheet |
| User Manual |
- Measuring ranges 0 ... 1 kN to 0 ... 200 kN [0 ... 225 lbf to 0 ... 44,962 lbf]
- Corrosion-resistant stainless steel design
- Integrated amplifier
- High long-term stability, high shock and vibration resistance
- Good reproducibility, simple installation
| Datasheet |
| User Manual |
- Measuring ranges 0 ... 3 kN to 0 ... 450 kN
- Relative linearity error 2 % Fnom
- Material: Stainless steel
- Ingress protection IP65
| Datasheet |
- Measuring ranges 0 ... 2 kN up to 0 ... 100 kN
- For compression force measurements
- Flat dimensions
- Stainless steel measuring body
- Protection class IP65
| Datasheet |
- Measuring ranges 0 ... 15 kN to 0 ... 1,500 kN
- Compact design, easy installation
- Ingress protection IP65
- Relative linearity error 1 % Fnom
| Datasheet |
- Exclusion of potential faults during installation and operation in hot runner systems thanks to plasticencapsulated transition
- The thermocouple can be installed without any fixing through bending or forming the sheathed cable or with a rotatable (if required, spring-loaded) union screw
- Probe diameter 0.5 ... 3.0 mm [0.020 ... 0.118 in]
- Kapton®, as the industry standard insulating material for connection cables
 Datasheet
|
|
Bedienungsanleitung
|
- Application range up to 400 °C [752 °F]
- Insertion length and contact pressure can be adjusted through sliding bayonet cap
- Thermocouple cable standard with glass-fibre insulation and stainless steel braid
- Thermocouple type J or K in accordance with IEC 60584 or ASTM E230
- Tip construction: Tubular design
|
Datasheet
|
|
User Manual
|
- Application range up to 400 °C [752 °F]
- Thermocouple cable standard with glass-fibre insulation and stainless steel braid
- Thermocouple type J or K in accordance with IEC 60584 or ASTM E230
- The manifold thermocouple is a low profile design
- Interchangeable and easily replaceable
|
Datasheet
|
|
User Manual
|
- The sensor is fixed with a pre-determined threaded bolt and mounted into the process
- The nozzle thermocouples are a low profile in design
- Extension cable is available in a variety of insulation and jacketed materials. These include fibreglass, PTFE or PVC to name a few.
- With or without stainless steel overbraid
- Interchangeable and easily replaceable
|
Datasheet
|
|
User Manual
|
- Measuring ranges from 0 … 0.05 to 0 … 1,000 bar
- Non-linearity 0.25 % or 0.5 %
- Output 4 ... 20 mA, DC 0 ... 10 V, DC 0 ... 5 V and others
- Electrical connection: Angular connector form A and C, circular connector M12 x 1, cable outlet 2 m
- Process connection G ¼ A DIN 3852-E, ¼ NPT and others
|
Datasheet |
| User Manual |
- Industry 4.0-ready IO-Link sensor improves connectivity and diagnostics
- Designed for rough demands of up to 1,000 g shock and -40 ... +125 °C [-40 ... +257 °F]
- Optimised design makes OEM machine integration easier
- Multicolour 360° LED status display simplifies troubleshooting and localisation
| Datasheet |
| User Manual |
- Measuring ranges from 0 ... 6 bar to 0 ... 600 bar
- Non-linearity 0.5 %
- Standard industrial signals
- Electrical connection: Angular connector form A and C, circular connector M12 x 1, Metri-Pack series 150, cable outlet 2 m unshielded or shielded
- Many internationally customary process connections
| Datasheet |
| User Manual |
- Measuring ranges from 0 ... 6 to 0 ... 1,000 bar [0 ... 500 to 0 ... 15,000 psi]
- Current and voltage outputs
- Ingress protection IP65 or IP67
- Wetted parts and case from stainless steel
- Vacuum-tight
| Datasheet |
| User Manual |
- Very good vibration and shock resistance
- Especially robust design
- Type approval for the shipbuilding industry
- Scale ranges to 0 ... 1,000 bar or 0 ... 15,000 psi
|
Datasheet |
| User Manual |
| User Manual |
| User Manual |
- Reliable and cost-effective
- Design per EN 837-1 or ASME B40.100
- Nominal size 40 [1 ½"], 50 [2"], 63 [2 ½"], 80 [3"], 100 [4"] and 160 [6"]
- Scale ranges to 0 ... 400 bar [0 ... 6,000 psi]
|
Datasheet |
- Easily readable, robust digital display
- Intuitive and fast setup
- Easy and flexible mounting configurations
- Flexibly configurable and scalable output signals
| Datasheet |
| User Manual |
- Adjustable switch hysteresis
- Setting ranges: 0.2 … 2 bar [3 ... 30 psi] to 30 ... 320 bar [450 ... 4,600 psi] and -0.85 ... -0.15 bar [-25 inHg ... -5 inHg]
- Non-repeatability of the switch point: ≤ 2 %
- Switching functions: Normally closed, normally open or change-over contact
- Media: Compressed air, neutral and self-lubricating fluids and neutral gases
|
Datasheet
|
- Good/bad indication through parameterisable digital display (red/green)
- Compact size enables easy installation in narrow spaces
- Optimised design makes OEM machine integration easier
- Designed for rough demands of up to 50 g shock and -40 ... +125 °C [-40 ... +257 °F]
| Datasheet |
| User Manual |
- Maximum reliability thanks to high-quality reed contacts
- Very high variety and customer-specific solutions possible
- Simple and fast installation
| Datasheet |
| User Manual |
- Media compatibility: Oil, water, diesel, refrigerants and other liquids
- Level: Up to 3 switching outputs, freely definable as normally open, normally closed or change-over contact
- Temperature: 1 bimetal temperature switch or Pt100/Pt1000, accuracy: Class B
- Potential-free switching reed contacts
| Datasheet |
| User Manual |
- Media compatibility: Oil, water, diesel, refrigerants and other liquids
- Permissible medium temperature range: -30 ... +120 °C [-22 ... +248 °F]
- Output signal: Resistance in a 3-wire potentiometer circuit, current output 4 ... 20 mA
- Measuring principle: Reed-chain technology
- Accuracy, resolution: 24 mm [0.9 in], 12 mm [0.5 in], 10 mm [0.4 in], 6 mm [0.2 in] oder 3 mm [0.1 in]
| Datasheet |
| User Manual |
- Media compatibility: Oil, water, diesel, refrigerants and other liquids
- Level: Current output 4 ... 20 mA
- Temperature: Pt100, Pt1000, accuracy: Class B
| Datenblatt |
| Bedienungsanleitung |
- Compact design, no moving components
- Mounting position as required
- Accuracy ±2 mm
- Visual indication of the switching status
- Choice of electrical connections: PUR, PVC cable or circular connector M8 x 1
| Datasheet |
| User Manual |
|
Datasheet |
| User Manual |
- Sensor ranges from -196 ... +600 °C (-320 ... +1.112 °F)
- For mounting in all standard thermowell designs
- Spring-loaded measuring insert (replaceable)
- Pt100 or Pt1000 sensors
- Explosion-protected versions
| Datasheet |
| User Manual |
| User Manual |
| User Manual |
| User Manual |
| User Manual |
- Sensor ranges from -196 ... +600 °C [-320 ... +1.112 °F]
- With integrated fabricated protection tube
- Spring-loaded measuring insert (replaceable)
- Explosion-protected versions are available for many approval types (see data sheet page 2)
|
Datasheet
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
- Sensor ranges from -196 ... +500 °C [-320 ... +932 °F]
- Compact design
- Universal application
- Direct installation into the process
- Explosion-protected versions are available for many approval types (see data sheet page 2)
| Datasheet |
| User Manual |
| User Manual |
| User Manual |
| User Manual |
| User Manual |
- Sensor ranges from -196 ... +600 °C [-320 ... +1,112 °F]
- For insertion, screw-in with optional process connection
- Connection head form B or JS
- Explosion-protected versions are available for many approval types (see data sheet page 2)
|
Datasheet
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
|
User Manual
|
|
Datasheet
|
|
User Manual
|
- Easily-readable, robust display
- Intuitive and fast setup
- Easy and flexible mounting configurations
|
Datasheet
|
- Fast configuration to match specific settings and default parameters of the extruder
- Single device for heat control-only, heat/cool control, or indicator-only
- Universal input
- Selectable controller or indicator modes
- Heat only or heat/cool control type
- Process & loop alarms
- Available in 1/16 & 1/8 DIN formats
- Modbus RS485 communications
- Ramping setpoint
- Process alarms have adjustable hysteresis
- Three alarm settings are standard and can be used for process high, process low, SP deviation, band, logical OR / AND, loop alarm for process control security
| Datasheet |
| User Manual |
- Pressure range 0-700bar
- Pressure port 1/2"20UNF or M18x1.5 (others on request)
- Accuracy <0.5% FS
- Display pressure in 13 different units
- Battery operation for pressure display (mains voltage required for heating pressure port)
- Battery: standard button cell, service life: >2000h in continuous operation
- Optional data transfer to PC/notebook of the generated print via external converter possible
- Oil volume 57ml (HLP22BP/olive oil)
- Measuring interval 0.5 seconds
- CE compliant/RoHS compliant
- DKD certificate optional
- Ambient conditions: 0...50°C/5...95% rel. humidity
- Dimensions (LxWxH): approx. 470 x170 x 280 mm
- Weight: approx. 7.2 kg, with case approx. 13 kg
| Datasheet |
| User Manual |
- Pressure range: 0 - 700 bar
- Max. Permitted pressure: FS + 10%
- Resolution: 100 mBar (10 mBar at pressure range = 200 bar)
- Accuracy: ± 0.05% f.s. E. (at t = 0 °C to +50 °C) +/- 1 digit
- Measuring rate: 500 ms (2 Hz)
- Units: including Bar / PSI / kPA / mH2O (a total of 13 different units, adjustable on the display)
- Heated pressure port : 1/2" 20UNF or M18 x 1.5 (other ports on request)
- Temperature at the pressure port: Adjustable from RT to +400°C on the built-in PID temperature controller
- Oil volume: 57 ml
- Type of oil: olive oil/HLP 22 BP
- Power supply: 3 V battery, type CR 2430
- Battery life: 2000 hours of continuous use
- Interface: RS485, connecting cable K-114-A with USB port optionally available
- Power supply for heating and sensor supply: 115 V AC or 230 V AC
- Sensor supply (test object): via integrated power pack and plug or socket
- Protection class: IP 65
| Datasheet |
| User Manual |
- Mains-independent thanks to battery supply (battery life: 2000 hours in continuous operation)
- Pressure range 0 - 700bar
- various pressure ports available
- Display of the pressure in 13 different units
- Accuracy +/- 0.05% FSO
- Resolution 100 mbar with 700 bar version
- Versions 200/350 bar final pressure value on request
| Datasheet |
No longer available. Successor model SPX 4222 / SPX 4622.
| Datasheet |
No longer available. Successor model SPX 4222 / SPX 4622.
| Datasheet |
Smart pressure transmitter. FM approved models available. Intrinsically safe models available. Data sheet only available in English.
| Datasheet |
Smart pressure transmitter. FM approved models available. Intrinsically safe models available. Data sheet only available in English.
| Datasheet |
No longer available. Successor model SPX 4222 / SPX 4622.
| Datasheet |
Intelligente Druckmesstechnik mit Option auf Eigensicherheit und HART
| Datasheet |
Intelligente Druckmesstechnik mit Option für Eigensicherheit
| Datasheet |
Intelligent pressure measurement technology with options for intrinsic safety and HART
| Datasheet |
The pressure transmitters of the TDT series are based on the proven TDA series. The existing process pressure is converted into a proportional volt output signal by an integrated amplifier in three or two-wire technology. This ensures signal transmission independent of interference, even over longer distances. Thanks to the integrated thermocouple, it is possible to measure the temperature directly on the medium at the same time.
| Datasheet |
The new pressure transmitter series TDT was specially developed for problem-free use in critical environments with high interference potentials, whereby the 4-20mA current signal can be transmitted over long distances without interference even with connecting cables without a screen.
| Datasheet |
The new pressure transmitter series MDT was specially developed for problem-free use in critical environments with high interference potentials, whereby the 4-20mA current signal can be transmitted over long distances without interference, even with connecting cables without a screen. These versions have a special, short pressure sensor head with a mounting nut ½-20 UNF thread and a flexible, partially free capillary to the amplifier housing. They are therefore particularly suitable for use in confined spaces.
| Datasheet |
The pressure transmitters of the MDT series are based on the proven MDA series. The upcoming
| Datasheet |
The new pressure transmitter series MDT was specially developed for problem-free use in critical environments with high interference potentials, whereby the 4-20mA current signal can be transmitted over long distances without interference, even with connecting cables without a screen.
| Datasheet |
The pressure transmitters of the MDT series are based on the proven MDA series. The existing process pressure is converted into a proportional volt output signal by an integrated amplifier in three or two-wire technology. This ensures signal transmission independent of interference, even over longer distances.
| Datasheet |
Die Drucktransmitterserie MDT wurde speziell für den problemlosen Einsatz in kritischer Umgebung mit hohen Störpotentialen entwickelt, wobei auch bei Anschlusskabeln ohne Schirm das Stromsignal 4-20mA störsicher über weite Distanzen übertragen werden kann.
| Datasheet |
- Large diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- Large diaphragm and optional split flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- Large diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- Large diaphragm and optional split flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- Meets CE-PED requirements for European standards
- 0-500 to 0-10,000psi range options
| Datasheet |
- Small diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- Small diaphragm and mounting flange for easier installation
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- 1/2-20 UNF thread pressure transmitter
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.15% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- 1/2-20 UNF thread pressure transmitter
- Reduce temperature drift by ~80% over non-compensated units
- Accuracy to ±0.25% FS
- Temperature output available (RTD or 4-20mA)
- HART™ digital communications
- 0-500 to 0-10,000psi range options
- Rugged welded electronics housing
| Datasheet |
- Simple and inexpensive 2-wire connection, unshielded in the toughest interference field environment
- ATEX approval: II 2 G EEx ia IIC T4
- Meets NAMUR regulations NE21 and NE43
- Smart transmitter with HARTTM communication
- 0.5% accuracy
- Pressure measuring ranges 0-100 to 0 - 2000 bar
- Process temperature up to 400°C
- Autozero and Autocal
| Datasheet |
- Simple and inexpensive 2-wire connection, unshielded in the toughest interference field environment
- ATEX approval: II 2 G EEx ia IIC T4
- Meets NAMUR regulations NE21 and NE43
- Smart transmitter with HARTTM communication
- Series with 0.25% and 0.5% accuracy
- Pressure measuring ranges 0-70 to 0 - 2000 bar
- Process temperature up to 400°C
- Autozero and Autocal
| Datasheet |
- HART digital communication
- Better than +/- 0.25% combined error
- 4 - 20 mA loop-powered output
- 0 - 250 to 0 -30,000 psi
- Explosion Proof, Intrinsically Safe/ATEX approved*
- Meets PED and CE requirements
- Configurable via handheld
- Precise repeatable pressure measurments
- Output supplied directly to DCS or PLC
- Customer defined pressure ranges
- Approved for hazardous environments
- Meets new EC requirements
| Datasheet |
- Better than ±0.5% accuracy
- 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs
- Stainless steel, Armoloy coated
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
- Adjustable zero and span
- Integral thermocouple
- Reliable pressure measurement
- Direct input to supervisory control systems
- Minimizes thread galling, abrasion resistant
- Choice of pressure ranges
- Easy set-up
- Adapt transmitter to process conditions
- Simultaneously measure pressure/temperature in one location
| Datasheet |
- Better than ±0.5% accuracy
- 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs
- Stainless steel, Armoloy coated
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
- Adjustable zero and span
- Integral thermocouple
- Reliable pressure measurement
- Direct input to supervisory control systems
- Minimizes thread galling, abrasion resistant
- Choice of pressure ranges
- Easy set-up
- Adapt transmitter to process conditions
- Simultaneously measure pressure/temperature in one location
| Datasheet |
- Better than ±0.5% accuracy
- 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs
- Stainless steel, Armoloy coated
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
- Adjustable zero and span
- Integral thermocouple
- Reliable pressure measurement
- Direct input to supervisory control systems
- Minimizes thread galling, abrasion resistant
- Choice of pressure ranges
- Easy set-up
- Adapt transmitter to process conditions
- Simultaneously measure pressure/temperature in one location
| Datasheet |
The pressure transmitters of the TDA series are based on the proven MDA series. They supply an output signal that is proportional to the process pressure via a closed, liquid-filled diaphragm seal system. Thanks to the integrated thermocouple, it is possible to measure the temperature directly on the medium at the same time.
| Datasheet |
- Installation for media temperature up to 400 °C
- l Integral thermocouple for simultaneous temperature measurement at the media
- l Flexible capillary between rigid stem and housing
- l Liquid-filled transmission system
- l Electrical built-in calibration
| Datasheet |
- Installation for media temperature up to 400 °C
- l Flexible capillary between rigid stem and housing
- l Liquid-filled transmission system
- l Electrical built-in calibration
| Datasheet |
- Installation for media temperature up to 400 °C
- l Flexible capillary between rigid stem and housing
- l Liquid-filled transmission system
- l Electrical built-in calibration
| Datasheet |
- Accuracy better than +/- 0.5%
- Dymax® coated stainless steel wetted parts
- Proven sensor design
- 0 - 500 to 0 -30,000 psi
- Internal 80% shunt calibration
- Reliable, repeatable pressure measurements
- Superior abrasion resistance
- Good stability and repeatability
- Wide variety of pressure ranges
- Easy to calibrate with local indicator
| Datasheet |
Die Druckaufnehmer der Serie MDA liefern über ein geschlossenes, flüssigkeitsgefülltes Druckmittlersystem ein zum anstehenden Prozessdruck proportionales Ausgangssignal.
| Datasheet |
The pressure transducers of the MDA series supply an output signal that is proportional to the process pressure via a closed, liquid-filled diaphragm seal system.
| Datasheet |
- TC Junction can be centered in hot melt stream
- Retractable from flush to 2.5”
- Up to 900°F melt temperatures
- All stainless steel construction
- Exposed junction
- 1/2-20 UNF mounting configuration
| Datasheet |
| User Manual |
- rugged but easy to carry
- weight 3.9 kg only
- accuracy +/- 0.1%
- battery powered > 200 days
- multiple pressure adaptors available
- pressure range of 0 - 700 bar
- switch selectable bar / PSI / kPA
- memory function up to 900 measurements
- serial communications
- various display and test functions
| Datasheet |
| User Manual |
The Dynisco Transducer Mounting Hole Machining Tool Kit contains all of the necessary drills and taps to prepare a standard 1/2 - 20 UNF transducer mounting hole and the 45 degree seat. All tools included in this kit are made of premium grade, high strength tool steel. Care should be taken in the use of proper speeds and feeds, lubricants, and a method to assure continual alignment of each progressing tool. M10 and M18 kits are also available.
|
Datasheet
|
Selectable transducer output sensitivity Standard 6 pin Bendix connector 5 step linear output 0 – 100% Identifies faulty components in a measurement loop
| Datasheet |
| User Manual |
The cable assemblies provide the electrical hookup from the transducer to the display instrumentation. The assemblies consist of a transducer mating connector and a length of shielded, 6 conductor cable with stripped leads.
|
Datasheet
|
Each Button Seal Process Adapter is made to order depending on the provided process mounting port sizing. Flange attachments are available as one piece solid construction, threaded, or threaded & welded. Flange design is application specific and dependent on the process sizing needs of diameter, thickness, bolt-hole diameter, mounting bolt pattern.
|
Datasheet
|
Installation of transducers into improperly cleaned or sized holes is one of the major causes of damage to these instruments. With this kit, the .312" tip diameter hole, the 45 degree seating surface, and the .451" hole can be cleaned. The kit includes a gauging plug which is used to verify that the hole has been correctly machined and cleaned. M10 and M18 cleaning kits also available.
| Datasheet |
| User Manual |
- Direct, local readings
- Mechanical design
- Step-up and stem-down versions
- Gauge head rotates 300°
- 0 - 5,000 or 0 -10,000 psi
- Stainless steel construction
| Datasheet |
| User manual |
- Dual 5-digit display
- Peak display function and digital auto-zero
- Programmable alarm relays
- Optional 4 - 20 mA, 0 - 10 Vdc retransmission
- Accuracy better than ±0.5%
- Customer definable engineering units
| Datasheet |
| Datasheet |
| User manual |
- Field selectable input/output ranges
- Adapts to a variety of applications
- Non - interactive zero and span adjustment
- Adjust once
- Optically isolated output
- Free from internal interference
- Convenient shunt calibration switch
- Convenient matching to transducer
- LIfetime warranty • No service problems
| Datasheet |
| User manual |
- Each welded assembly consists of a threaded tubular body with a rupture disk welded onto the process end
- Welded one piece assembly – no degradation of joint strength at elevated temperatures
- Iconel rupture disk – stable through a wide range of temperatures
- Burst ratings 750 to 15,000 psig (for higher pressures contact Dynisco)
- Burst tolerance ±10%
- Typical Standard Deviation is ±1%
- 100% leak tested
- 100% electronic thread verification
| Datasheet |
| User manual |
- Welded one piece assembly - no degradation of joint strength at elevated temperatures
- Inconel rupture disk – stable through a wide range of temperatures
- Burst pressure ranges from 1,000 to 15,000psi
- Accuracy of ±10% of rated burst pressure at 300° – 750°F
- Designed for melt temperatures up to 800°F (425°C)
- Leak rate exceeds 1x10-6 standard cc/sec
| Datasheet |
| User manual |
- 4-20mA loop-powered output
- +/- 0.25% accuracy available
- Wide selection of pressure ranges available
- Turndown 3:1
- Configurations available for use in hazardous locations
- Remotely configurable via HARTTM
- Precise, repeatable pressure measurements
- Output supplied directly to DSC or PLC
- Meets CE requirements
- CE ATEX Intrinsically Safe Approved
- FM Explosion Proof Approved
- CSA Explosion Proof Approved
- SIL 2 Certified (Pressure Output)
- PL'c' Certified (Relay Output)
- Additional approvals are available
| Datasheet |
| User Manual |
- 3 mv/v full scale output
- Accuracy ±0.50%
- Pressure ranges 0-1,000 PSI to 0-30,000 PSI
- Iconel 718 pressure fitting
- Zero volume pressure port
- Meets cleanability standards
- Metal-to-metal pressure seal
- Internal 80% shunt calibration
- CE approved
| Datasheet |
| User Manual |
- Flush diaphragm
- Accuracy ±0.50%
- Zero volume pressure port
- 15 to 10,000 psi
- 3 mV/V output
- Internal shunt calibration
| Datasheet |
| User Manual |
- Accuracy ±0.25%
- Stainless steel construction
- Heavy duty construction
- Ranges 0-110 PSI through 0-750 PSI
- Advanced electronic design
| Datasheet |
| User Manual |
- Accuracy ±0.25%
- Stainless steel construction
- Sealed zero and span potentiometers
- Tight temperature compensation
- Ranges 0-15 PSI through 0-15,000 PSI
- Advanced electronic design
- Internal shunt calibration
| Datasheet |
- 3 mV/V full scale output
- Accuracy better than ±0.5%
- Pressure ranges from 0-15 PSI to 0-10,000 PSI
- Pressure/vacuum service
- Extended operating temperature range
- All welded, stainless steel construction
- Withstands severe shock and vibration
- Internal 80% shunt calibration
- CE approval
| Datasheet |
| User Manual |
- Accuracy ±0.15%
- Excellent temperature compensation
- Welded, stainless steel construction
- 3mv/V output
- Internal shunt calibration
| Datasheet |
| User Manual |
- Accuracy ±0.25%
- 3 mV/V, 5 Vdc and 10 Vdc outputs
- 0 - 100 to 0 - 30,000 psi
- Excellent temperature compensation
- Internal shunt calibration
- Bonded strain gauge sensor
| Datasheet |
| User Manual |
- Accuracy ±0.5%
- 3 mV/V, 5 Vdc and 10 Vdc outputs
- 0 - 100 to 0 - 30,000 psi
- Excellent temperature compensation
- Internal shunt calibration
- Bonded strain gauge sensor
| Datasheet |
| User Manual |
- Better than ±0.25% accuracy
- 3.33 mV/V FSO
- Internal 80% shunt calibration
- All stainless steel wetted parts
- 0 - 500 to 0 - 30,000 psi
- Excellent thermal stability and repeatability
- Exposed, bendable capillary
| Datasheet |
| User Manual |
- Better than ±0.5% accuracy
- 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
- Adjustable zero and span
- Exposed, bendable capillary
| Datasheet |
- Better than ±0.5% accuracy
- 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
- Adjustable zero and span
- Exposed, bendable capillary
| Datasheet |
- Adjustable zero and span
- Accuracy better than ±0.5%
- DyMax® coated stainless steel wetted parts
- 4 - 20 mA output
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Better than ±0.5% accuracy
- 3.33 mV/V FSO
- Internal 80% shunt calibration
- All stainless steel wetted parts
- 0 - 500 to 0 - 30,000 psi
- Good stability and repeatability
- Exposed, bendable capillary
| Datasheet |
| User Manual |
- 1" flex bend radius
- Inconel 718 diaphragm
- Free spinning jam nut
- Better than ±0.5% accuracy
- Up to 750°F (400°C) melt temperatures
| Datasheet |
| User Manual |
- 3 mV/V output
- Accuracy ±0.50%
- Handles temperatures up to 285°F (140°C)
- All welded, stainless steel construction
- Rugged design
- Internal shunt calibration
- Compact
| Datasheet |
| User Manual |
- 1" flex bend radius
- Inconel 718 diaphragm
- Free spinning jam nut
- Better than ±0.5% accuracy
- Up to 750°F (400°C) melt temperatures
- Adjustable zero and span
- 0 to 5 Vdc, 1 to 6 Vdc, 0 to 10 Vdc or 1 to 11 Vdc outputs
| Datasheet |
- 1" flex bend radius
- Inconel 718 diaphragm
- Free spinning jam nut
- Better than ±0.5% accuracy
- Up to 750°F (400°C) melt temperatures
- Adjustable zero and span
- 0 to 5 Vdc, 1 to 6 Vdc, 0 to 10 Vdc or 1 to 11 Vdc outputs
| Datasheet |
- Adjustable zero and span
- Accuracy better than ±1.0%
- Inconel diaphragm
- 4 - 20 mA output
- 0 - 3,000 to 0 - 20,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Better than ±0.5% accuracy
- Special fill material
- 0 - 1000 to 0 - 10,000 psi
- 3.33 mV/V FSO
- Fill material meets FDA and USDA requirements
| Datasheet |
| User Manual |
- 3.33 mV/V full scale output
- Accuracy of better than ±0.5%
- Pressure ranges from 0 - 500 psi to 0 - 10,000 psi
- All welded stainless steel with washdown capability
- FDA recognized safe (GRAS) for food and medical applications
- Available with hermetic connector or conduit fitting
- Internal 80% shunt calibration
- CE approved
| Datasheet |
| User Manual |
- Adjustable zero and span
- Oil fill meets FDA dn USDA requirements
- Accuracy better than ±0.5%
- DyMax® coated convoluted SST wetted parts
- 0 - 10 Vdc output
- Internal 80% shunt calibration
| Datasheet |
- Adjustable zero and span
- Oil fill meets FDA requirements
- Accuracy better than +/- 0.5%
- DyMaxTM coated convoluted SST wetted parts
- 0 - 5 Vdc output
- Internal 80% shunt calibration
- Easily adapt transmitter to process conditions
- Ideal for medical and food extrusion
- Repeatable, reliable pressure measurements
- Superior abrasion resistance
- Direct input to supervisory control systems
- Easy to set up
| Datasheet |
- Auto-Zero functionality
- Oil fill meets FDA requirements
- Accuracy better than ±0.5%
- DyMax® coated convoluted SST wetted parts
- 4 - 20 mA output
- No span or zero pots
| Datasheet |
- Accuracy better than ±0.25%
- Measures up to 1000°F (538°C)
- NaK fill meets FDA and USDA requirements
- Inconel diaphragm
- 0 - 500 to 0 -10,000 psi
- 3.33 mV/V FSO
| Datasheet |
| User Manual |
- 3.33 mV/V full scale output
- Accuracy of better than ±0.25%
- Pressure ranges from 0 - 35 BAR to 0 - 700 BAR
- Handles temperatures up to 1000°F
- Superior thermal compensation
- Inconel diaphragm
- Internal 80% shunt calibration
- CE Approved
| Datasheet |
| User Manual |
- 3.33 mV/V full scale output
- Accuracy of better than ±0.5%
- Pressure ranges from 0 - 35 BAR to 0 - 700 BAR
- Temperature up to 538°C
- All welded stainless steel with washdown capability
- Available with hermetic connector or conduit fitting
- Internal 80% shunt calibration
- CE approved
| Datasheet |
| User Manual |
- Adjustable zero and span
- Push-rod technology, non-liquid filled system
- Accuracy better than +/- 0.5%
- DyMax® coated convoluted SST wetted parts
- 4 - 20 mA output
- Internal 80% shunt calibration
| User Manual |
- Better than ±0.5% accuracy
- Push - rod design
- Measures up to 750°F (400°C)
- All stainless steel, wetted parts
- Internal 80% shunt calibration
| Datasheet |
| User Manual |
- Alternative fill model available
- Accuracy better than ±0.5%
- TiAlN diaphragm coating is standard
- mV/V, 0-10VDC, or mA outputs available
- Integral temperature sensor option
- Available in configurations that fit most extruder applications
- 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability
| Datasheet |
| User Manual |
- Adjustable zero and span
- Accuracy better than ±0.5%
- DyMax® coated stainless steel wetted parts
- 0 - 10 Vdc and 1 - 11 Vdc outputs
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibrations
| Datasheet |
- Adjustable zero and span
- Accuracy better than +/- 0.5%
- Dymax® coated stainless steel wetted parts
- 0 - 5 Vdc and 1 - 6 Vdc outputs
- 0 - 500 to 0 - 30,000 psi
- Internal 80% shunt calibrations
- Adapt transmitter to process conditions
- Repeatable, reliable pressure measurements
- Superior abrasion resistance
- Direct input to supervisory control systems
- Wide variety of pressure ranges
- Easy to calibrate and use
| Datasheet |
- Adjustable zero and span, via side-mounted pots
- Accuracy better than ±0.5%
- DyMax® coated stainless steel wetted parts
- 4-20 mA output
- 0-500 to 0-30,000 psi
- Internal 80% shunt calibration
- 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit
- Output signal meets Performance Level ‘c’ as defined by the Machinery Directive (Category 1)
- Meets the following compliance directives, when properly installed and used:
- –SIL2
- Machinery Directive EN ISO 13849-1
| Datasheet |
- 4-20mA loop-powered output
- Improved accuracy with Dynalarity ±0.2% available
- Wide selection of pressure ranges available
- Turndown 3:1
- Configurations available for use in hazardous locations
- Remotely configurable via HARTTM
- Precise, repeatable pressure measurements
- Output supplied directly to DSC or PLC
- Meets CE requirements
- CE ATEX Intrinsically Safe Approved
- FM Explosion Proof Approved
- CSA Explosion Proof Approved
- SIL 2 Certified (Pressure Output)
- PL'c' Certified (Relay Output)
- Additional approvals are available
| Datasheet |
- 4-20mA loop-powered output
- +/- 0.25% accuracy available
- Wide selection of pressure ranges available
- Turndown 6:1
- Configurations available for use in hazardous locations
- Remotely configurable via HART
- Precise, repeatable pressure measurements
- Output supplied directly to DSC or PLC
- Meets CE requirements
- CE ATEX Intrinsically Safe Approved
- SIL 2 Certified (pressure output)
- PL'c' Certified (relay output)
- Additional approvals are available
| Datasheet |
- 4-20mA loop-powered output
- +/- 0.15% accuracy available
- Reduced temperature drift by 80% over non compensated units
- Temperature output available (RTD or 4-20mA)
- Wide selection of pressure ranges available
- Turndown 6:1
- Configurations available for use in hazardous locations
- Remotely configurable via HART
- Precise, repeatable pressure measurements
- Output supplied directly to DSC or PLC
- Meets CE requirements
- CE ATEX Intrinsically Safe Approved
- FM Explosion proof approved
- CSA Explosion proof approved
- SIL 2 Certified (pressure output)
- PL'c' Certified (relay output)
- Additional approvals are available
| Datasheet |
- Accuracy of better than ±1.0% • Reliable pressure measurement
- Four user selectable pressure ranges in one model
- Maximizes inventory flexibility
- Externally selectable range via rotary switch
- Maximum versatility for changing process conditions
- 3.33 mV/V FSO for selected range
- Standard low level output
- Internal 80% shunt calibration
- Easy set-up
- All stainless steel wetted parts
- Corrosion resistant
- Proven sensor design
- Good stability and repeatability
- Type J thermocouple
- Simultaneously measure pressure/temperature in one location
| Datasheet |
- Accuracy of better than ±1.0%
- Reliable pressure measurement
- Four user selectable pressure ranges in one model
- Maximizes inventory flexibility
- Externally selectable range via rotary switch
- Maximum versatility for changing process conditions
- 3.33 mV/V FSO for selected range
- Standard low level output
- Internal 80% shunt calibration
- Easy set-up
- All stainless steel wetted parts
- Corrosion resistant
- Proven sensor design
- Good stability and repeatability
| Datasheet |
- Accuracy better than ±1.0%
- Inconel diaphragm
- Superior temperature stability
- Patented sensing element
- 0 - 3,000 to 0 -30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- 6 mm sensing element
- Fits in space restricted areas, reduces mounting hole dead space
- Internal 80% shunt calibration
- Easy set - up
- 0 - 5,000 to 0 - 10,000 psi
- Choice of pressure ranges
- Good stability and repeatability
- Reliable pressure measurement
- Flexible stem • Easy to install and ideal for high local temperatures
| Datasheet |
- 6 mm sensing element
- Fits in space restricted areas
- Exposed, bendable capillary
- Ideal for injection molding nozzles
- Internal 80% shunt calibration
- Easy set - up
- 0 - 5,000 to 0 - 10,000 psi
- Choice of pressure ranges
- Good stability and repeatability
- Proven sensor design
- Flexible stem
- Easy to install, ideal for high local temperatures
- Classic, standard design
- Economically priced
| Datasheet |
- Output: 3.33 mV/V +/- 2.0%
- Input Voltage: 10 Vdc recommended, 12 Vdc maximum
- Combined Error: +/- 0.25% FSO, (Including Linearity, Repeatability & Hysteresis) +/- 0.5% FSO for 500, 750, 1,000 psi ranges
- Repeatability: +/- 0.1%FSO, +/- 0.2% FSO for 500, 750, 1,000 psi ranges
- Configuration: Four-arm bonded foil Wheatstone bridge strain gage
- Bridge Resistance: Input: 345 Ohms minimum, Output: 350 Ohms +/- 10%
- Over Pressure: 2 X FSO or 35,000 psi whichever is less
- Zero Balance: +/- 5% FSO
- Internal Shunt Calibration (R-Cal): 80% FSO +/- 0.5%
- Insulation Resistance: 1000 megohms @ 50 Vdc
| Datasheet |
- Accuracy better than ±0.5%
- DyMax® coated stainless steel wetted parts
- Proven sensor design
- 0 - 500 to 0 -30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Accuracy of better than ±0.25%
- Choice of flanged or threaded configurations
- 0 - 250 to 0 - 10,000 psi
- Withstands processes up to 700°F
- Internal 80% shunt calibration
- Replacement for traditional “button - seal” units
| Datasheet |
- Accuracy better than ±0.5%
- DyMax® coated stainless steel wetted parts
- Proven sensor design
- 0 - 500 to 0 -30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Accuracy better than ±0.25%
- DyMax® coated stainless steel wetted parts
- Proven sensor design
- Excellent thermal stability and repeatability
- 0 - 500 to 0 -30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Economical and repeatable pressure meausurements
- Superior abrasion resistance
- Stability and repeatability
- Variety of pressure ranges
- Easy to calibrate
| Datasheet |
- Adjustable zero and span
- Accuracy better than ±1.0%
- DyMax® coated stainless steel wetted parts
- 0 - 10 Vdc outputs
- 0 - 500 to 0 - 10,000 psi
- Internal 80% shunt calibrations
| Datasheet |
- Adjustable zero and span, via side-mounted pots
- Accuracy better than ±1.0%
- DyMax® coated stainless steel wetted parts
- 4-20 mA output
- 0-500 to 0-30,000 psi
- Internal 80% shunt calibration
| Datasheet |
- Integral relay switch for redundant safety and future compliance
- 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit.
- Meets Performance Level ‘c’ as defined by the Machinery Directive (single sensor installed per Category 1).
- Meets Performance Level ‘d’ as defined by the Machinery Directive (two sensors installed per Category 3).
- Meets the following compliance directives, when properly installed and used:
- Machinery Directive 2006/42/EC
- NFPA 79 clauses A.9.2, A.9.4.1, A.9.4.3.2
- EMC Directive 2004/108/EC
- PED 97/23/EC
- Available on popular mV/V (PT, MDA, DYN) and mA-HART SPX models
| Datasheet |
- All digital calibration
- Increased speed and force range
- Advanced electronics and software enable up to 45 shear stress or shear rate data points per test
- Unique algorithms for polymer melt stability
- Bi-directional communications enable test parameters to be downloaded from the PC
- Multiple barrel heating zones and adaptive PID temperature control algorithm provide precise and uniform heat up to 430°C (500°C optional for Model 7000 and 7001 only)
- Precision servo-drive motor and transducers enable tight control of stress and rate mode tests
- Tungsten carbide dies and a hardened and honed tool steel barrel ensure long years of service
- LAB KARS, advanced rheology software
|
Datasheet
|
- NEW! Automatic Sample Cutter (Autocutter) for ease and consistency in sample cutting. Benefits include:
- It keeps users away from hot barrel when retrieving samples
- Increased repeatability of sample size
- Increased automation with the ability to run more than one LMI at a time
- Easy retrofit into existing machines
- Performance meets international standards: A2LA Accreditation, ASTM D1238 & D3364, ISO 1133, BS2782, DIN 53735 JIS K7210
- Color Touch Screen with a simplified, user-friendly interface for setup and control
- Semi-automated pneumatic weight lift option for all weight loads
- Ergonomic, stackable weights from .325 – 31.6kg for all LMI applications
- Force Packer option for consistent material packing
- USB connectivity for data storage, scale integration, networking and printing capabilities
- Melt Flow Rate to Intrinsic Viscosity correlation for PET
- 100 program storage capability when used with software option
- Modular options allow for easy field upgrades from a base model to a fully integrated Analyzer vs. Instrument
|
Datasheet
|
- Auto-tuning control in a discrete 1/4 DIN package
- Graphical/text LCD Display with color change LED backlight on alarm (red/green)
- Graphical trend view of process, alarms & events as standard
- Easy to use Setup Wizard
- Single loop control
- Display and control of differential pressure is available
- USB port option for access to configuration and log files
- Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets
- Modbus RS-485 and Modbus TCP Ethernet supported
- BlueControl configuration and commissioning software option
|
Datasheet
|
- Universal Input
- 2 Alarm Outputs
- Retransmission
- Min/max Value Hold
- Modbus Communications
- Transmitter Power supply
|
Datasheet
|
- Universal Input (Strain Gauge, Voltage, Current, Thermocouple or RTD)
- Min/max Value Hold
- 2 Alarm Outputs
- Retransmission
|
Datasheet
|
- Graphical/text LCD Display with color change LED backlight on alarm (red/green)
- Graphical trend view of process, alarms & events as standard
- Easy to use Setup Wizard
- USB port option for access to configuration and log files
- Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets
- Modbus RS-485 and Modbus TCP Ethernet supported
- BlueControl configuration and commissioning software option
- Display pressure, temperature, or even differential pressure
- Optional second input/output for cost-effective single instrument
- Analog retransmission of process variable allows signal to be sent to other devices
- Configure locally or remotely by optional Modbus RTU
|
Datasheet
|
- No fill material
- RoHS compliant for sustainability programs
- Robust, thicker Inconel diaphragm is coated with DyMax®
- Optional Type J or K thermocouple is available to provide a melt temperature signal as well as a 4-20 mA temperature output
- Equipped with a 1/2-20 UNF for installation in standard transducer mounting holes
- Also available to install 1/2-20 UNF units into a Button Seal application
- Diaphragm composition of Inconel 718 coated with the abrasion resistant properties of DyMax®
- Sealed, welded shell and electrical connection available if washdown capability is needed for food or mechanical applications (not available if thermocouple option TCx is selected)
- Available with thermocouple temperature output
- 250-10,000 PSI pressure range capability
- HART digital communication available
- Direct measurement tip is a simple and elegant design with a more robust diaphragm
- Direct measurement of process reduces errors transferred by complicated internal support structures, transmission fill materials, or moving push rods
- Designed to work with universal pressure indicators
|
Datasheet
|
| User Manual |
- 4-20mA loop-powered output
- +/- 0.25% accuracy available
- Wide selection of pressure ranges available
- Turndown 6:1 (3:1 Turndown for model SPX 2290)
- Configurations available for use in hazardous locations
- Remotely configurable via HARTTM
- Precise, repeatable pressure measurements
- Output supplied directly to DSC or PLC
- Meets CE requirements
- CE ATEX Intrinsically Safe Approved
- FM Explosion Proof Approved
- CSA Explosion Proof Approved
- SIL 2 Certified (Pressure Output)
- PL'c' Certified (Relay Output)
- Additional approvals are available
|
Datasheet
|
- 2 year warranty and 60 years of Dynisco industry experience
- Accuracy better than ±0.5%
- TiAlN diaphragm coating is standard
- mV/V, 0-10VDC, or mA outputs available
- Integral temperature sensor option
- Available in configurations that fit most extruder applications
- 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability
| Datasheet |