EX-DGM506-S Ex gas pressure monitor 15–60 mbar


  • Ex gas pressure monitor 15–60 mbar
  • The DGM series is calibrated for rising pressure.
  • The adjustable switching pressure shown on the scale corresponds to the switching point at rising pressure.
  • The reset point is lower by the amount of the switching differential.
  • For maximum and minimum pressure monitoring.

Datasheet
Operating manual
Add to your Quote List

Ex-DGM pressure monitors for fuel gases

DVGW-tested gas pressure monitors in accordance with DIN EN 1854 are suitable for all gases according to DVGW worksheet G 260 and for air.

Ex-DGM pressure monitors for fuel gases are DVGW-tested in accordance with DIN EN 1854 and are suitable for all gases according to DVGW worksheet G 260 and for air. They are supplied with a robust housing made of seawater-resistant die-cast aluminium GD Al Si 12. The switching differentials largely depend on the set switching pressure and are not adjustable.

Certifications

  • CE-0085 AQ 1088 according to EU/2009/142/EC (30.11.2009) and DIN EN 1854 (01.07.2006)
  • IBExU12ATEX1040 according to ATEX 2014/34/EU
  • SIL2 according to IEC 61508-2

Datasheets






EX-DGM516 Ex-Gasdruckwächter 40–160 mbar
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    EX-DGM506-S Ex gas pressure monitor 15–60 mbar

    EX-DGM516 Ex-Gasdruckwächter 40–160 mbar
    • Ex gas pressure monitor 15–60 mbar
    • The DGM series is calibrated for rising pressure.
    • The adjustable switching pressure shown on the scale corresponds to the switching point at rising pressure.
    • The reset point is lower by the amount of the switching differential.
    • For maximum and minimum pressure monitoring.

    Datasheet
    Operating manual
    Add to your Quote List

    Ex-DGM pressure monitors for fuel gases

    DVGW-tested gas pressure monitors in accordance with DIN EN 1854 are suitable for all gases according to DVGW worksheet G 260 and for air.

    Ex-DGM pressure monitors for fuel gases are DVGW-tested in accordance with DIN EN 1854 and are suitable for all gases according to DVGW worksheet G 260 and for air. They are supplied with a robust housing made of seawater-resistant die-cast aluminium GD Al Si 12. The switching differentials largely depend on the set switching pressure and are not adjustable.

    Certifications

    • CE-0085 AQ 1088 according to EU/2009/142/EC (30.11.2009) and DIN EN 1854 (01.07.2006)
    • IBExU12ATEX1040 according to ATEX 2014/34/EU
    • SIL2 according to IEC 61508-2

    Datasheets






    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info