Showing all 20 results

  • Multi-function capabilities: electrical, frequency, temperature and pressure
  • Optional HART and Foundation Fieldbus communicators
  • ATEX, IECEx and ETL approved for hazardous area use
  • Modular re-rangeable and expandable concept
  • Individual components can be used as stand-alone instruments
  • Allows significant inventory reductions
  • Simplifies training and improves operator safety
  • Reduces cost of ownership
  • Provided with one free 4Sight2 Lite calibration software license
Datasheet
User Manual
ATEX Certifikate

Measuring counts 
TRMS 
AC/DC voltage1000V anche AC+DC
AC/DC current1A anche AC+DC
Resistance and buzzer continuity 
Diode test 
Frequency 
DC 4-20mA current measurement 
DC 0-10V voltage measurement 
DC 4-20mA current generation 
Measurement of output current of transducers 
Simulation of an external transducer 
Loop supply with minimum voltage 24V 
Generation of selectable ramp 
Load of 250Ω for testing HART transducers 
Backlit LCD display 
Autorange 
Auto Power OFF 
Data HOLD 
MIN/MAX function 
AVG function 
Relative measurement 
Protection categoryCAT IV
Weight in grams (batteries included) 
Size (LxWxH) (mm)
Datasheet

Measuring counts 
TRMS 
AC/DC voltageMAX 10VDC
AC/DC currentMAX 24mADC
DC 4-20mA current measurement 
DC 0-10V voltage measurement 
DC 4-20mA current generation 
DC 0-10V voltage generation 
Measurement of output current of transducers 
Simulation of an external transducer 
Loop supply with minimum voltage 24V 
Generation of selectable ramp 
Backlit LCD display 
Auto power off 
Protection category 
Weight in grams (batteries included) 
Size (LxWxH) (mm)
Datasheet

  • Current Calibrator 0/4 - 22mA, Source/Sink
  • Voltage Calibrator 0-14V
  • mV Ranges 0-28mV and 0-560 mV
  • DIN Thermocouples J, K, N, R, S, T, B, E
  • Multimeter ±2V to ±200V DC and ±100mA
  • Simultaneous Calibration and Measurement
  • Steps, Ramps, direct entry
  • Built-in rechargeable Battery
Datasheet

  • Current Output 0-22mA, Source/Sink
  • Voltage Output 0-25V
  • mV Outputs 0-27mV and 0-540 mV
  • DIN Thermocouples J, K, N, R, S, T, B, E
  • RTD Simulator -200 … 850ºC
  • Resistance Range up to 3kOhm
  • Multimeter ±2V to ±200V DC and ±100mA
  • Measurements of fast Transients
  • Datalogger Function (Option)
  • 8 Tables with each 50 free Output Points
Datasheet

  • Measuring and  Sourcing loop current, mV, and V
  • Measuring and sourcing simultaneously
  • Loop integrity check capability
  • 24V loop supply with simultaneous current measurement
  • Three year warranty
  • ISO 17025-accredited calibration w/data included
No longer available
Datasheet

  • Accuracy to 0.01% of reading
  • Measure, source, or simulate loop current
  • Measure DC volts
  • Simultaneously mA and % span display
  • Switch functionality
  • Selectable ramp and step functions
  • HART 250Ω resistor in series with 24V loop
  • ISO 17025-accredited calibration w/data included
Datasheet
User Manual

  • Sourcing, simulating and measuring, temperature and electrical signals
  • Smartphone-like menu and interface make the operation simpler and easier
  • The internal cold junction compensation sensor can be re-calibrated  at ice point by users
  • Ultra-compact, 3.9” x 7.6” x 2.0”, and 1.6 lb (0.7 kg)
  • ISO 17025-accredited calibration w/data included
No longer available
Datasheet

  • Sourcing, simulating and measuring pressure, temperature and electrical signals
  • Smartphone-like menu and interface make the operation simpler and easier
  • The internal cold junction compensation sensor can be re-calibrated at ice point by users
  • Ultra-compact, 3.9” x 7.6” x 2.0”, and 1.6 lb (0.7 kg)
  • ISO 17025-accredited calibration w/data included
Datasheet

  • Sourcing, simulating and measuring pressure, temperature and electrical signals
  • Built-in Barometer
  • Intrinsically safe models available (Ex)
  • Large Smartphone like touchscreen user experience
  • USB Type-C and Bluetooth communications
  • IP67 Rated
  • High Voltage Measurement Capability (±300V AC)
  • True RMS Voltage Meter Capability
  • Dual channel pressure module ports
  • High Static Differential Pressure Measurement 0.002% FS
  • ISO 17025-accredited calibration w/data included
Datasheet
External Pressure Modules

  • Sourcing, simulating and measuring pressure, temperature and electrical signals
  • Built-in Barometer
  • Intrinsically safe models available (Ex)
  • Large Smartphone like touchscreen user experience
  • USB Type-C and Bluetooth communications
  • IP67 Rated
  • High Voltage Measurement Capability (±300V AC)
  • True RMS Voltage Meter Capability
  • Dual channel pressure module ports
  • High Static Differential Pressure Measurement 0.002% FS
  • ISO 17025-accredited calibration w/data included
Datasheet
External Pressure Modules
ATEX Certificate

  • Sourcing, simulating and measuring pressure, temperature and electrical signals
  • Built-in Full Hart Communicator (ADT227-HART)
  • Built-in Barometer
  • Intrinsically safe models available (Ex)
  • Large Smartphone Like Touchscreen User Experience
  • USB Type-C and Bluetooth communications
  • IP67 Rated
  • High Voltage Measurement Capability (±300V AC)
  • True RMS Voltage Meter Capability
  • Dual channel pressure module ports
  • High Static Differential Pressure Measurement 0.002% FS
  • ISO 17025-accredited calibration w/data included
Datasheet
External Pressure Modules

  • Sourcing, simulating and measuring pressure, temperature and electrical signals
  • Built-in Full Hart Communicator (ADT227-HART)
  • Built-in Barometer
  • Intrinsically safe models available (Ex)
  • Large Smartphone Like Touchscreen User Experience
  • USB Type-C and Bluetooth communications
  • IP67 Rated
  • High Voltage Measurement Capability (±300V AC)
  • True RMS Voltage Meter Capability
  • Dual channel pressure module ports
  • High Static Differential Pressure Measurement 0.002% FS
  • ISO 17025-accredited calibration w/data included
Datasheet
External Pressure Modules
ATEX Certificate

  • Measurement and simulation of the following parameters: pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse
  • Large colour touchscreen display with new intuitive and user-friendly interface
  • Internal pressure/vacuum generation
  • Option: intrinsically safe version, II 2G Ex ib IIC T4 Gb - Tamb: -10 ... +50 °C
  • Option: integrated HART® module for communication with HART® instruments



Datasheet
User Manual
User Manual
User Manual

Compact and simple to use, the C.A 1623 calibrator is capable of measuring and simulating up to 7 different probes as well as a resistance. When used as a battery-powered stand-alone instrument, it offers a long battery life in the field. When connected to the mains, it can be used continuously without any time limit!

Datasheet

The compact, simple-to-use C.A 1621 thermocouple temperature calibrator is capable of measuring and simulating up to 8 types of thermocouples, as well as a voltage in mV. When used as a battery-powered stand-alone instrument, it offers a long battery life in the field. When connected to the mains, it can be used continuously without any time limit!

Datasheet

Compact and simple to use, the C.A 1631 calibrator is equipped with a wide screen for comfortable reading.. The C.A 1631 can be used to measure and supply a DC current loop from 0 to 24 mA with 0.015% accuracy and a DC voltage between 0 and 20 V with an accuracy of +/- 0.02 %. When used as a battery-powered stand-alone instrument, it offers a long battery life in the field. When connected to the mains, it can be used continuously without any time limit!

Datasheet

  • Measures 4 to 20 mA signals without breaking the loop
  • Best in class 0.2% accuracy
  • Delivers 0.01 mA resolution and sensitivity
  • Measures mA signals for PLC and control system analog I/O
  • Detachable clamp for measurements in tight locations
Datasheet

  • Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clampmeter
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • Simulate 4 to 20 mA signals for testing control system I/O
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters
  • Source mA output signals in a linear ramp or 25 % step output – Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
 
Datasheet

  • DC and AC Voltages to 1050V
  • Basic Accuracy 35ppm/Year
  • DC und AC Currents to 20A
  • Power and Energy Calibration
  • RTD and Thermocouples
  • Resistors to 10 GΩ
  • Capacitors to 120 mF
  • Calibration Frequencies to 300 kHz
  • GPIB and RS232 Ports
  • Oscilloscope Function to 400 MHz
Datasheet

Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
This site is registered on wpml.org as a development site.