- Sources and reads mA, mV, V, ohms, frequency and pulses
- Simulates and reads 8 RTDs and 12 thermocouples
- 32 pressure modules from 10 in H2 0 to 10,000 psi (25 mbar to 700 bar)
- Simultaneous dual reading capability
- Automatic switch test and pressure leak test
- 1000 point data storage with real time clock
- 24 V loop power supply
- HART® loop resistor
- Large backlit display
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient one-handed operation
- Plug/play connector for IDOS universal pressure modules
 Datasheet |
- 41 pressure ranges from ±25 mbar to 1,400 bar (±10 inH20 to 20,000 psi/2.5 kPa to 140 MPa)
- Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C
- Integral calibration record with calibration due count-down display
- Leak test, tare, maximum/minimum and filter functions
- Hazardous Area (Intrinsically safe) version available
- Optional remote plug and play pressure (PM700E) and Resistance Temperature Detector (RTD-PROBE) sensors
| Datasheet |
| User Manual |
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
- mA measure, switch test and 24V loop power
- Large backlit display, menu driven interface
- HART® loop resistor
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient, one-handed operation
- Secure grip, impact resistant, elastomer protected
- Plug and play connector for IDOS universal measurement modules
| Datasheet |
| User Manual |
- Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
- Single or dual range configuration
- IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
- mA measure, switch test and 24V loop power
- Large backlit display, menu driven interface
- HART® loop resistor
- Robust and weatherproof
- Compact, simple to use, easy to carry
- Convenient, one-handed operation
- Secure grip, impact resistant, elastomer protected
- Plug and play connector for IDOS universal measurement modules
| Datasheet |
| User Manual |
- 0 - 130 mbar operating range
- 750 mbar over range
- -10°C to 50°C operating range
- Backlit
- Zeroing
- Hold
- Range lock
- Max/Min
- Selectable units of pressure
- IP67 - dust and waterproof
- Port size 4mm
 Datasheet |
| User Manual |
- 0-7 Bar operating range
- 10 Bar over range
- -10°C to 50°C operating range
- Backlit
- Zeroing
- Hold
- Range lock
- Max/Min
- IP67 - dust and waterproof
- Port size 4mm
| Datasheet |
| User Manual |
- 0-7 Bar operating range
- 10 Bar over range
- -10°C to 50°C operating range
- Backlit
- Zeroing
- Hold
- Range lock
- Max/Min
- IP67 - dust and waterproof
- Port size 4mm
| Datasheet |
| User Manual |
- 0 - 10bar operating range
- 17 bar over range
- IP67 - Dust and waterproof
- Backlit
- Zeroing
- Hold
- Range lock
- Max/Min
- Port size 4mm
- Selectable units of pressure
- -10°C to 50°C Operating Temperature
| Datasheet |
| User Manual |
- 0-1 bar operating range
- 2 bar over range
- -10°C to 50°C
- Backlit function
- Zeroing function
- Hold function
- Range lock function
- Max/Min
- Selectable units of pressure
- Port size 4mm
| Datasheet |
| User Manual |
- Lo Range: 0-199.9mbar.
- Hi Range: 0-2000mbar.
- Accuracy: 20°C to 30°C -0.1% rdg +0.1% fs + 1 digit.
| Datasheet |
- Lo Range: 0-199.9mbar.
- Hi Range: 0-500mbar.
- Accuracy: 20°C to 30°C -0.1% rdg +0.1% fs + 1digit.
| Datasheet |
- Lo Range: 0-199.9mbar.
- Hi Range: 0-1000mbar.
- Accuracy: 20°C to 30°C -0.1% rdg +0.1% fs + 1 digit.
| Datasheet |
- Lo Range: 0-19.99mbar.
- Hi Range: 0-100mbar.
- Accuracy: 20°C to 30°C -0.1% rdg +0.1% fs + 1 digit.
| Datasheet |
- Digital indicator with interchangeable pressure sensors (plug-and-play)
- Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
- Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
- Software and complete service cases (incl. pumps) available
| Datasheet |
| User Manual |
- Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
- Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
- Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
- Data logger for recording measured values
| Datasheet |
| User Manual |
- Robust and waterproof digital indicator with interchangeable pressure sensors (plug-and-play)
- Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
- Pressure type: positive and negative gauge pressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
- Software and complete service cases (incl. pumps) available
| Datasheet |
| User Manual |
- Digital indicator with easily interchangeable reference pressure sensors (plug-and-play)
- Measuring ranges from -1 ... 6,000 bar (-15 ... 75,000 psi) (vacuum and absolute pressure ranges also available)
- Accuracy: 0.025 % (incl. calibration certificate)
- Simultaneous pressure and temperature measurement with external Pt100 temperature probe
- Min, max, pressure rate and data logger function
| Datasheet |
| User Manual |
- handheld pressure calibrator with easily interchangeable reference pressure sensors (sensor can also be attached externally)
- Measuring ranges from 0 ... 4 psi to 0 ... 116,000 psi (0 ... 250 mbar to 0 ... 8,000 bar )
- Accuracy: 0.025 % (incl. calibration certificate)
- Calibration and pressure-switch test functions
- Software and complete service cases (incl. pumps) available
| Datasheet |
| User Manual |
- Manual pressure generation of -0.85 … +25 bar [12.3 ... +360 psi]
- Accuracy: 0.025 % FS (incl. calibration certificate)
- Generation/measurement of 0 ... 24 mA and voltage supply DC 24 V
- Data logger with high measuring rate and large memory
- Intrinsically safe version
- Measuring ranges up to 0 ... 1,000 bar (0 ... 15,000 psi), vacuum and absolute pressure ranges also available
- Accuracy: up to 0.05 % (incl. calibration certificate)
- Intrinsically safe version
- Logger function with up to 50 measured values per second
- Communication with WIKA-CAL software over WIKA-Wireless
| Datasheet |
| User Manual |
- Measuring ranges from -1 … +16 bar to 0 … 1,000 bar (-14.5 ... 230 psi to 0 ... 14,500 psi)
- Accuracy: 0.25 % (incl. calibration certificate)
- Robust case with protective rubber cap
- Simple operation using four buttons
- Complete service cases incl. pressure generation available
| Datasheet |
| User Manual |
- nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar
- accuracy: 0.05 % FSO BFSL (class 0.05)
- modular sensor concept
- graphics-capable display
- background illumination
- communication interface USB 2.0
- stainless steel housing d = 100 mm
- zero point calibration
- data logger
| Datasheet |
- nominal pressure: 0 …100 mbar up to 0 ... 400 bar
- modular sensor concept
- data logger
- graphics-capable display
- stainless steel housing d = 100 mm
- communication interface USB 2.0
- data logger interval 1s ... 99 days or fixed time
- default values for time / test duration
- zero point calibration
| Datasheet |
- Druckbereich von 0 …100 mbar bis 0 ... 400 bar
- Datenlogger
- grafikfähiges Display
- Edelstahlgehäuse Ø 100 mm
- USB 2.0 Schnittstelle
- Optional
- Kalibrierzertifikat nach DKD / DAkkS
- Ex-Ausführung Zone 1
- Software inkl. USB-Konverter
- Funktionen
- Nullpunkt-Justage
- Datenlogger
- Abschaltautomatik
- freie Tastenbelegung
- Hintergrundbeleuchtung u. v. m.
| Datasheet |
- Druckbereich von 0 ... 600 bar bis 0 ... 2200 bar
- Datenlogger
- grafikfähiges Display
- Edelstahlgehäuse Ø 100 mm
- USB 2.0 Schnittstelle
- Optional
- Kalibrierzertifikat nach DKD / DAkkS
- Ex-Ausführung Zone 1
- Software inkl. USB-Konverter
- Funktionen
- Nullpunkt-Justage
- Datenlogger
- Abschaltautomatik
- freie Tastenbelegung
- Hintergrundbeleuchtung u. v. m.
| Datasheet |
- Pocket differential pressure measuring instrument
- Measurement of gas flow and static pressure
- Measurement menu for pressure drop test including alerts
- Simple configuration and determination of volume flow with Pitot tube
- Magnetic holder for easy attachment
Handy and intelligent: the compact testo 510i differential pressure measuring instrument featuring professional measuring technology and smartphone operation for measuring differential pressure, air flow velocity and volume flow. Readings can be viewed conveniently on your smartphone/tablet via the testo Smart Probes App and emailed directly.
| Datasheet |
| User Manual |
| User Manual |
- 7 pressure units to choose from: kPa, hPa, mm H2O, mmHg, psi, inch H2O, inch Hg
- Large measuring range up to 2000 hPa
- TopSafe protective case (optional) protects against impact, dirt and spray water
- Illuminated display, min./max. value display, hold function
The testo 512 differential pressure measuring instrument is available in four different versions. This version is ideal for differential pressure measurement in the measuring range 0 to 2000 hPa.
| Datasheet |
| User Manual |
- Integrated differential pressure sensor with an accuracy of 0.2 % of f.v., 0.1 % of f.v. and up to 2.5 hPa
- Calculation of the flow velocity and the volume flow via Pitot tube (optional)
- Multi-point and timed mean calculation
- 2 probe inputs for additional pressure and temperature probes
The high-precision testo 521 differential pressure measuring instrument is ideal for accurate differential pressure measurements in air conditioning and ventilation technology, for instance for pressure drop on filters, checking fans and extractors or for Pitot tube measurements.
| Datasheet |
| User Manual |
- Temperature-compensated differential pressure sensor
- Multi-point and timed mean calculation
- Recording of measurement data with freely selectable measuring rate
- 2 probe inputs for pressure and temperature
Ideal for checking pressure in sensitive industrial processes: the testo 526 high-precision differential pressure measuring instrument with a measuring accuracy of ± 0.1% and of ± 0.05% of final value. It also has two probe inputs for additional pressure and temperature probes.
| Datasheet |
| User Manual |
- Setting and checking operating pressures is easier than ever
- Simple data transmission – via USB and Bluetooth®
- For mobile use and stationary continuous operation
| Datasheet |
