Additional specifications: - Large measurement range: 1,500 Ω / 500 µH / 40A - Alarms on Ω, A and V - Automatic Pre-Hold mode when the clamp is opened - 300 storage locations - Real-time clock for time/date-stamping of measurements - Automatic calibration of jaw opening distance at start-up - Buzzer and automatic power-off
 Datasheet |
Additional specifications: - Large measurement range: 1,500 Ω / 500 µH / 40A - Alarms on Ω, A and V - Automatic Pre-Hold mode when the clamp is opened - 2,000 storage locations - Real-time clock for time/date-stamping of measurements - Automatic calibration of jaw opening distance at start-up - Buzzer and automatic power-off - Bluetooth communication interface - GTC data transfer software
| Datasheet |
 Datasheet |
T2000 is a professional clamps specially developed to evaluate resistance of earth rods with no need to disconnect any part of the system (STAKELESS METHOD)
| Datasheet |
T2100 is a professional clamp specially developed to evaluate resistance of earth rods with no need to disconnect any part of the system.
| Datasheet |
The ΩMegaSafe is a easy testing ohmmeter for rapid testing according to VDE 0413 of protective and earth cables, equipotential bonding and lightning protection cables.The EP 4Ex is approved for use in EX II areas.
| Datasheet |
- 3-wire Earth Resistance
- 2-wire Earth Resistance
- Measurement range up to 50kOhm
- Calibration of test cables
- Automatic regulation of noise voltage disturbances
| Datasheet |
GEO416 measures earth resistance with 2 wires, 3 wires and 4 wires by voltammetric method and ground resistivity with storage and download capabilities.
| Datasheet |
- 2P resistance / 3P earth measurements up to 50 kΩ in high-resistivity terrain
- Voltage measurement up to 600 V and RH stake resistance measurement
- Automatic stabilization of the measurement
- Help with positioning the stakes – average and 52%/62%/72% deviation
- Leakage current measurement from 0.5 mA
- Battery recharging via the mains, USB socket or vehicle cigarette lighter
| Datasheet |
- 3-in-1 tester: resistivity, earth, coupling between two earths
- measurement range: 0.01 to 2,000 Ω (3 automatic ranges)
- change from 4-wire method to 3-wire method thanks to 1 removable captive bar between E and ES
- 3 fault presence indicators to validate measurement
- measurement frequency: 128Hz
- easy connection of stakes by means of colour-coded terminals
- large backlit digital display with 2,000 counts
- power supply: 8 x 1.5V batteries for an average battery life, constantly checked, of 4,500 measurements of 15s each
- IP53 leakproof case with folding cover and carrying handle
- compliant with IEC 61557 -1 and -5
- electrical safety: EN 61010
- dimensions: 273 x 247 x 127mm - weight: 2.8kg
| Datasheet |
- 3-in-1 tester: resistivity, earth, coupling between two earths
- measurement range: 0.01 to 2,000 Ω (3 automatic ranges)
- change from 4-wire method to 3-wire method thanks to 1 removable captive bar between E and ES
- 3 fault presence indicators to validate measurement
- measurement frequency: 128Hz
- easy connection of stakes by means of colour-coded terminals
- large backlit digital display with 2,000 counts
- power supply: NiMH rechargeable battery for an average battery life, constantly checked, of 1,180 measurements of 15s each
- IP53 leakproof case with folding cover and carrying handle
- compliant with IEC 61557 -1 et -5
- electrical safety: EN 61010
- dimensions: 273 x 247 x 127 mm - weight: 2.8 kg
| Datasheet |
The C.A 6470N guarantees the reliability of measurements carried out by:
- traditional stake-based methods
- self-diagnosis when each measurement starts, so that any faults liable to affect the measurements (bad connections or presence of disturbance signals) are indicated
- extensive measurement ranges: 0.001 Ω to 100 kΩ
- adjustment of the measurement frequency between 41 Hz and 512 Hz (3P & 4P measurements)
- for earth coupling measurements, simply perform the 3 succesive measurements required and the tester then calculates the coupling coefficient automatically
- for soil resistivity measurements, simply program the distances used for the measurement and the instrument automatically calculates r using the Wenner or Schlumberger methods.
- Power supply: NiMh rechargeable battery with external charger
- IP53 protection
- Compliant with IEC 61557 -1 -4 -5
- Safety: IEC 61010 50V CAT IV
- Dimensions: 272 x 250 x 128 mm, 3 kg
| Datasheet |
The C.A 6471 guarantees the reliability of measurements carried out by:
- traditional stake-based methods
- self-diagnosis when each measurement starts, so that any faults liable to affect the measurements (bad connections or presence of disturbance signals) are indicated
- extensive measurement ranges: 0.001 Ω to 100 kΩ
- adjustment of the measurement frequency between 41 Hz and 512 Hz (3P & 4P measurements)
- for earth coupling measurements, simply perform the 3 successive measurements required and the tester then calculates the coupling coefficient automatically
- for soil resistivity measurements, simply program the distances used for the measurement and the instrument automatically calculates r using the Wenner or Schlumberger methods.
- Power supply: NiMh rechargeable battery with external charger
- IP53 protection
- Compliant with IEC 61557 -1 -4 -5
- Safety: IEC 61010 50V CAT IV
- Dimensions: 272 x 250 x 128 mm, 3 kg
| Datasheet |
- 3P measurement up to 10 kΩ and stray voltages up to 60 V RMS
- 4P and selective 4P measurement
- Earth loop measurement with 2 clamps from 0.01 Ω to 500 Ω
- Earth coupling measurement
- Soil resistivity measurement: simply program the distances used for the measurement and the tester then calculates r using the Wenner oe Schlumberger methods
- Ground potential measurement
- Continuity and resistance measurement
- Pylon earth measurement with the C.A 6474
- Storage of 512 test results
- USB optical link
- Ground Tester Transfer PC software to process the stored data
- Power supply: NiMh battery with external charger
- IP53 protection
- IEC 61557 -1 -4 -5
- IEC 61010 50V CAT IV
- Dimensions: 272 x 250 x 128 mm, 3 kg
| Datasheet |
The Earth Kits are used with earth and resistivity testers implementing the 1P, 3P and 4P loop methods.The Earth Kits comprise 1, 2 or 4 stakes, 3 or 4 different-coloured reels of cables 50 m, 100 m or 150 m long, 1 mallet , 5 spade lug/banana plug adapters and a carrying bag. The 100 m resistivity add-on can be used to complete a 3P earth kit with 2 cable reels and two stakes. The continuity kit comprises 4 x 4 mm banana cables, 4 crocodile clips and 2 test probes.
| Datenblatt |
| Bedienungsanleitung |
