The DPI610E not only delivers highly accurate measurements – it does so for a wide variety of pressure ranges (350mbar / 5 psi / 33 kPa to 1000bar /15000 psi / 100 MPa ). That means one device can cover all your calibration needs – reducing both cost of ownership and maintenance.
 Datasheet |
|
User Manual
|
|
Quick Start
|
- 41 pressure ranges from ±25 mbar to 1,400 bar (±10 inH20 to 20,000 psi/2.5 kPa to 140 MPa)
- Total 1 year uncertainty down to 0.025% full scale (FS) over temperature range of -10°C to +50°C
- Integral calibration record with calibration due count-down display
- Leak test, tare, maximum/minimum and filter functions
- Hazardous Area (Intrinsically safe) version available
- Optional remote plug and play pressure (PM700E) and Resistance Temperature Detector (RTD-PROBE) sensors
| Datasheet |
| User Manual |
- 50% smaller and 33% lighter than the DPI 610
- Generates 0 to 20 bar/300 psi in less than 30 seconds
- Creates 95% vacuum
- Pressure measurement is twice as accurate
- Three times better electrical accuracy
- Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage
- Fast, three touch set-up for any application
- Calculates PASS/FAIL errors, documents results and interfaces with calibration software
- Provided with one free 4Sight2 Lite calibration software license
| Datasheet |
- The complete pressure calibration tool: pump, measure, analyze
- Best in class pressure accuracy
- Fast and dependable from vacuum to 1000 bar/15000 psi
- Easy to use touch screen
- No in-the-field leaks with quick-to-fit pressure adapters and hoses
- Provided with one free 4Sight2 Lite calibration software license
| Datasheet |
DPI620 GENII Multi-Function Process Calibrator and HART Communicator for safe and hazardous area use
- Multi-function capabilities: electrical, frequency, temperature and pressure
- Optional HART and Foundation Fieldbus communicators
- ATEX, IECEx and ETL approved for hazardous area use
- Modular re-rangeable and expandable concept
- Individual components can be used as stand-alone instruments
- Allows significant inventory reductions
- Simplifies training and improves operator safety
- Reduces cost of ownership
- Provided with one free 4Sight2 Lite calibration software license
| Datasheet |
| User Manual |
- In-the-field pressure range selection from the GENii PM620/PM620T pressure module family.
- In built barometer to enable accurate pseudo pressure measurements.
- Hybrid pressure generation and control from -0.9barg (-13psig) to 20barg (300psig).
- Automatic selection of manual pressure generation, automatic pressure generation or pressure venting with large test volume capability.
- Fully automatic pressure generation and control to accurately maintain setpoint.
- Minimise in-the-field leaks with quick-fit pressure adapters.
- Physical or *Bluetooth® wireless connection to a DPI620G electrical calibrator.
- In-the-field rechargeable battery pack replacement.
- Autonomous calibration wizard to store procedures and calibration data.
| Datasheet |
| Flyer |
- Digital indicator with interchangeable pressure sensors (plug-and-play)
- Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
- Type of pressure: positive and negative overpressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
- Software and complete service cases (incl. pumps) available
 Datasheet |
| User Manual |
- Robust and waterproof digital indicator with interchangeable pressure sensors (plug-and-play)
- Measuring ranges from 0 ... 25 mbar to 0 ... 1,000 bar (0 ... 0.4 psi to 0 ... 14,500 psi)
- Pressure type: positive and negative gauge pressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optional 0.1 % (incl. calibration certificate)
- Software and complete service cases (incl. pumps) available
| Datasheet |
| User Manual |
- Intrinsically safe indicator with interchangeable pressure sensors model CPT62I0 (plug-and-play)
- Measuring ranges 0 ... 1,000 bar [0 ... 14,500 psi]
- Type of pressure: Positive and negative overpressure, absolute pressure and differential pressure
- Accuracy: 0.2 %, optionally 0.1 % (incl. calibration certificate)
- Data logger for recording measured values
| Datasheet |
| User Manual |
A wide variety of reference pressure sensors, offering
various measuring ranges of up to 6,000 bar (75,000 psi),
are available to the operator, always ensuring a solution
matched to the application.
|
Datasheet
|
|
User Manual
|
- handheld pressure calibrator with easily interchangeable reference pressure sensors (sensor can also be attached externally)
- Measuring ranges from 0 ... 4 psi to 0 ... 116,000 psi (0 ... 250 mbar to 0 ... 8,000 bar )
- Accuracy: 0.025 % (incl. calibration certificate)
- Calibration and pressure-switch test functions
- Software and complete service cases (incl. pumps) available
|
Datasheet
|
|
User Manual
|
- Manual pressure generation of -0.85 … +25 bar [12.3 ... +360 psi]
- Accuracy: 0.025 % FS (incl. calibration certificate)
- Generation/measurement of 0 ... 24 mA and voltage supply DC 24 V
- Data logger with high measuring rate and large memory
- Intrinsically safe version
- Measurement and simulation of the following parameters: pressure, electrical signals (mA, mV, V, Ω), temperature (TC, RTD), frequency and pulse
- Large colour touchscreen display with new intuitive and user-friendly interface
- Internal pressure/vacuum generation
- Option: intrinsically safe version, II 2G Ex ib IIC T4 Gb - Tamb: -10 ... +50 °C
- Option: integrated HART® module for communication with HART® instruments
| Datasheet |
| User Manual |
| User Manual |
| User Manual |
- 0.02%, 0.05% FS Accuracy
- Intrinsically Safe
- Field Switchable Pressure Module
- Dual Digital Pressure Module Inputs
- Color Touchscreen Display
- Built-in Quick Test Task Feature
- Built-in Barometer
- Intuitive Smartphone Like Interface
- Bluetooth and USB Communication
- Optional HART Communication
- Communicates with Additel's Link Mobile App
- ISO 17025-accredited calibration w/data included
| Datasheet |
The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display.
|
Datasheet
|
|
User Manual
|
|
User Manual
|
The 760-D gives you differential and gauge pressure but at a higher pressure range than the ADT760-LLP. Covering the range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy of 0.02%FS, the ADT760-D is an ideal solution to cover very common gauge and differential pressure measurements. The Additel 760-D comes with an internal module of your choice. The maximum range module compatible with the ADT760-D is to 35 psi. Lower pressure configurations down to ±10 inH²O differential can be purchased to improve accuracy at lower pressures.
- max. Pressure range: -0,86 bar up to 2,5 bar
- Accuracy: 0,02% v.E.
- Stability: 0,005% v.E.
| Datasheet |
| User Manual |
| User Manual |
The 760-LLP is designed for low pressure calibration and comes with a built-in pressure module of your choice. The maximum range module compatible with the ADT760-LLP is to ±30 inH²O (±75 mbar) and provides an accuracy to 0.05% FS (see ordering information for configurations with the option of the ADT760 and a module of your choice). Additional internal pressure modules (ADT155 series) are available and provide a variety of ranges down to ±0.25 inH²O (±0.62 mbar). The accuracy of 0.05%FS and control stability 0.005%FS is based on the internal module’s span. Measurements can be made in gauge or differential mode.
- max. Pressure range: ±75 mbar
- Accuracy: 0,05% v.E.
- Stability: 0,005% v.E.
| Datasheet |
| User Manual |
| User Manual |
The 760-MA generates and controls pressure from vacuum pressures up to 300 psig
(20 bar.g) with an accuracy of 0.02%FS. Equipped with a built-in barometric reference, each unit can switch between gauge and absolute pressure types. A variety of internal sensors are available which offer lower pressure ranges for improved performance.
- max. Pressure range: -0,86 bar up to 20 bar
- Accuracy: 0,02% v.E.
- Stability: 0,005% v.E.
| Datasheet |
| User Manual |
| User Manual |
At Additel, innovation and continuous improvement are part of our company's culture and the products we introduce. When we set out to deliver the Additel 761A series calibrators, we knew we needed to provide breakthrough additional value to the existing line of calibrators (Additel 761 series).
| Datasheet |
| User Manual |
| User Manual |
• Automated and self-contained pressure generation and control from -0.9 bar to 70 bar (1,000) psi • Standard accuracy to 0.01% of Span* • Optional precision accuracy models up to 0.01% of Span • Two removable internal pressure modules for multi-range selection • Control stability to 0.003% of Span • Portable, designed for use in the field and in the lab • Ability to measure two external pressure modules • Wi-Fi, Bluetooth, USB and Ethernet communication • HART and profibus communication • Data logging and task management
| Datasheet |
| User Manual |
| User Manual |
- Automated and self-contained pressure generation and control from 100 hPa to 1200 hPa
- Standard accuracy to 0.01% FS
- Optional precision accuracy models up to 0.01% FS
- Two removable internal pressure modules for multi-range selection
- Control stability to 0.02 hPa
- Portable, designed for use in the field and in the lab
- Ability to measure two external pressure modules
- Wi-Fi, Bluetooth, USB and Ethernet communication
- HART and profibus communication
- Data logging and task management
- Patented electric pump technology and improved speed
| Datasheet |
| User Manual |
| User Manual |
- Automated and self-contained pressure generation and control from -0.9 bar to 2.5 bar (35) psi
- Standard accuracy to 0.02% of Span*
- Optional precision accuracy models up to 0.01% of Span
- Two removable internal pressure modules for multi-range selection
- Control stability to 0.005% of Span
- Portable, designed for use in the field and in the lab
- Ability to measure two external pressure modules
- Wi-Fi, Bluetooth, USB and Ethernet communication
- HART and profibus communication
- Data logging and task management
- Patented electric pump technology and improved speed
| Datasheet |
| User Manual |
| User Manual |
- Measuring Range: ±50 mbar and ±75 mbar
- Accuracy: 0,05 % o.S.
- Two removable internal pressure modules
- Built-in electric pump can set accurate pressure quickly
- Differential pressure, Gauge Pressure. Absolut pressure, Barometric pressure
- Easy Handling
- The perfect air pipeline protection can effectively avoid blockage and leakage problems
- Built-in battery (8 hours run)
- compact size
- for calibration laboratories, workplace and on-site calibrations
| Datasheet |
| User Manual |
| User Manual |
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range manual or auto select
- Control stability ≤ 0.005%FS
- Portable - designed for use in the field and in the lab
- Control by optional external pressure modules
- Supports two external pressure modules
- Wi-Fi, LAN, Bluetooth, USB and Ethernet communication
- Full HART field communicator
- HART and PROFIBUS communication
- Data logging and task management
- Patented electric pump technology
| Datasheet |
ICP 40.2 - Precision Hand Pressure Pump
- Testing, adjustment and calibration of all types of pressure gauges
- 3 in 1: vacuum, low pressure and medium pressure calibration
- Exact setting in the mbar range thanks to the ultra-fine thread pitch and large-volume control valve
- Tool-free change between overpressure and vacuum generation
- Measuring ranges up to 0 ... 1,000 bar (0 ... 15,000 psi), vacuum and absolute pressure ranges also available
- Accuracy: up to 0.05 % (incl. calibration certificate)
- Intrinsically safe version
- Logger function with up to 50 measured values per second
- Communication with WIKA-CAL software over WIKA-Wireless
| Datasheet |
| Datasheet |
| User Manual |
