- Cleaning tool kit for pressure transducer mounting holes
- Suitable for 1/2"-20 UNF and M18 × 1.5 mounting bores
- Designed for cleaning contaminated pressure and temperature transducer bores
- Cleans the bore, sensor tip diameter area and 45° sealing surface
- Helps prevent transducer damage caused by residue or polymer build-up
- Includes seal face cutter, guide sleeve, handle, test plug, thread cleaner and marking compound
- Test plug for checking the correct sealing surface
- For use when semi-molten polymer is present in the mounting bore
- Cleaning should be performed without exceeding the recommended torque of 50 Nm
- Recommended for regular maintenance of melt pressure sensor mounting holes
 Datasheet |
| User Manual |
- Process adapter for button seal connections
- Allows installation of 1/2"-20 UNF melt pressure sensors into button seal process mounting ports
- Suitable for pressure sensors from Dynisco or other manufacturers
- Made-to-order design matched to the existing process connection
- Flange attachment available as one-piece, threaded, or threaded and welded construction
- Pressure range depends on the selected sensor, up to 10,000 psi maximum
- Temperature range depends on the selected sensor
- Standard material for adapter body and flange: 17-4 stainless steel
- Other materials available, such as 303 stainless steel, Hastelloy or aluminum 6061
- Compatible with approved sensors
|
Datasheet
|
- Cable assemblies and connectors for Dynisco pressure transducers
- Designed for electrical connection between transducer and display or instrumentation
- Shielded 6-conductor cables with matching transducer connectors
- Available with Bendix PT06A-10-6S and Bendix PC06A-12-8S connectors
- Cable lengths from 10 to 100 ft available
- Mating connectors, bulk cable, adapters and special cable assemblies available
- Additional gaskets, O-rings, gauge plugs and mounting accessories available
- Suitable for many Dynisco series such as PT, MDA, DYN-X, MRT, EPR and IPX/PX
- Thermocouple connectors and replacement thermocouples available
- Many standard items available from stock
|
Datasheet
|
- Transducer simulator for troubleshooting Dynisco strain gauge pressure transducers
- Suitable for checking strain gauge conditioners, indicators and controllers
- Simulates various pressure transducer output signals
- Selectable transducer output sensitivity
- 5-step linear output from 0...100 %
- Output signal adjustable in 20 % steps and via variable trim pot
- Standard 6-pin Bendix connector
- Identifies faulty components in a measurement loop
- Can temporarily substitute for many pressure transducers during diagnostics
- Practical diagnostic tool for service, maintenance and commissioning
| Datasheet |
| User Manual |
- Tool kit for machining Dynisco pressure transducer mounting holes
- Includes drills, reamer and taps for proper preparation of the mounting bore
- Suitable for mounting holes with 1/2"-20 UNF-2B or M18 x 1.5 thread
- Step drill included for machining the 45° sealing surface
- Test plug for checking the correctly machined sealing surface
- Supports precise concentricity and correct bore depth
- Required for clean, leak-tight and reliable installation of melt pressure transducers
- Helps avoid installation errors and damage to the sensor diaphragm
|
Datasheet
|
- Portable pressure source for quick field testing of pressure transducers
- Dynisco PPS1100 for efficient pressure generation and comparison measurements
- Pressure range from 0...700 bar
- Accuracy ±0.1 % full scale
- Selectable pressure units: bar, PSI, kPa and mH₂O
- Integrated memory function for up to 900 measurements, optionally up to 8000 measurements
- Battery-powered operation with more than 200 days battery life
- Rugged portable design with only 3.9 kg weight
- Serial communication and various display and test functions
- Suitable for service, maintenance, commissioning and on-site testing
| Datasheet |
| User Manual |
- Mains-independent thanks to battery supply (battery life: 2000 hours in continuous operation)
- Pressure range 0 - 700bar
- various pressure ports available
- Display of the pressure in 13 different units
- Accuracy +/- 0.05% FSO
- Resolution 100 mbar with 700 bar version
- Versions 200/350 bar final pressure value on request
| Datasheet |
- Pressure range: 0 - 700 bar
- Max. Permitted pressure: FS + 10%
- Resolution: 100 mBar (10 mBar at pressure range = 200 bar)
- Accuracy: ± 0.05% f.s. E. (at t = 0 °C to +50 °C) +/- 1 digit
- Measuring rate: 500 ms (2 Hz)
- Units: including Bar / PSI / kPA / mH2O (a total of 13 different units, adjustable on the display)
- Heated pressure port : 1/2" 20UNF or M18 x 1.5 (other ports on request)
- Temperature at the pressure port: Adjustable from RT to +400°C on the built-in PID temperature controller
- Oil volume: 57 ml
- Type of oil: olive oil/HLP 22 BP
- Power supply: 3 V battery, type CR 2430
- Battery life: 2000 hours of continuous use
- Interface: RS485, connecting cable K-114-A with USB port optionally available
- Power supply for heating and sensor supply: 115 V AC or 230 V AC
- Sensor supply (test object): via integrated power pack and plug or socket
- Protection class: IP 65
| Datasheet |
| User Manual |
- Pressure range 0-700bar
- Pressure port 1/2"20UNF or M18x1.5 (others on request)
- Accuracy <0.5% FS
- Display pressure in 13 different units
- Battery operation for pressure display (mains voltage required for heating pressure port)
- Battery: standard button cell, service life: >2000h in continuous operation
- Optional data transfer to PC/notebook of the generated print via external converter possible
- Oil volume 57ml (HLP22BP/olive oil)
- Measuring interval 0.5 seconds
- CE compliant/RoHS compliant
- DKD certificate optional
- Ambient conditions: 0...50°C/5...95% rel. humidity
- Dimensions (LxWxH): approx. 470 x170 x 280 mm
- Weight: approx. 7.2 kg, with case approx. 13 kg
| Datasheet |
| User Manual |
Sensor Accessories for Dynisco Sensors
“Sensor accessories” for Dynisco sensors include components and tools necessary for correct installation, connection and integration of pressure, temperature or process sensors. Accessories can include adapters, protection sleeves, cables, connectors, mounting flanges or calibration/test modules. They ensure that sensors operate reliably and safely, even under demanding industrial conditions.
Questions & Answers on Sensor Accessories
What is considered sensor accessory?
Adapters, threaded fittings or flanges, protective or immersion sleeves, cables and connectors, mounting hardware, and sometimes seals or calibration aids.
Why is accessory important?
Because correct mounting and proper connection ensure accurate measurements and safe operation — improper installation can lead to errors, leaks or damage.
Can accessories extend the sensor’s application range?
Yes — for example protective sleeves for corrosive media or high temperatures, or adapters to fit different process interfaces or installation conditions.
Does the accessory need to match the sensor type precisely?
Yes — often adapters or flanges are designed for specific sensor series or dimensions to guarantee functionality, sealing and safety.
How is accessory installed?
Using standard process connections (threads, flanges), with seals or mounting rings if necessary; cables/connectors mounted as required — often together with protective or mounting elements.
When should accessories be used?
When sensors are installed in harsh environments, with corrosive media, high temperature / pressure, or when special mounting conditions (long sensor shaft, remote cable routing, protective housing) are needed.
What are the risks without correct accessory?
Measurement errors, leaks, premature wear or failure, safety hazards — overall reduced measurement reliability and operational safety.
Who needs sensor accessories?
Operators of plants using sensors — especially in plastic processing, mechanical engineering, process industries or any demanding industrial environment where sensors undergo strong conditions.