- Dynisco Model 1380 as compact process display for pressure measurement applications
- Suitable for 350 ohm strain gauge bridges
- Selectable display for common pressure units
- Fast measurement rate with 100 ms processing time
- Two programmable alarms for limit monitoring
- Peak value memory for minimum and maximum values
- Optional analog output with mA or V signal
- Single-wire break monitoring and input monitoring
- Fast configuration via CPI interface and DynaLink software
 Datasheet
|
- Universal 1/8 DIN process indicator for current loop and voltage signals
- Dynisco 1391 with field-selectable display and dual configurable alarms
- Inputs for current loop and voltage transmitters
- Internal 24 VDC supply to power 2- and 4-wire transmitters
- DynaLink software for configuration and management of settings
- Current loop break protection
- Optional analog retransmission and MODBus communication
- Peak and valley detection for monitoring process extremes
- Open input protection for sensor or wiring faults
- Compact 1/8 DIN size for space-saving panel installation
|
Datasheet
|
- Suitable for extrusion applications and industrial process indication
- Universal input for strain gauge, voltage, current, thermocouple or RTD
- One or two configurable alarm outputs
- Optional linear retransmission of the displayed process variable
- Min/max value hold for process values
- 4-digit 13 mm LED display with colour change on alarm
- 3-button operation for easy setup
- Sensor break detection in less than 2 seconds
- IEC IP66 front panel protection for industrial applications
|
Datasheet
|
- Suitable for displaying process values in selectable engineering units
- Universal input for strain gauge sensors, thermocouples, RTD and linear DC or mA signals
- Optional secondary input for cost-effective single-instrument solutions
- Displays pressure, temperature or differential pressure
- Bright 5-digit LED display with 35-segment bar graph display
- Two standard alarms, third alarm optional
- Analog retransmission of process variable to other devices
- Configurable locally or remotely by optional Modbus RTU
- IP65 / NEMA 4X front panel rating for harsh environments
| Datasheet |
- Dynisco 1490 with universal input for thermocouples, PT100, strain gauge and DC linear signals
- Up to two programmable alarms available
- Optional analog output for retransmission of the process variable
- Optional 24 VDC transmitter supply
- Modbus communication via 2-wire RS485
- Peak value memory for minimum and maximum values
- 3-button operation with bright 5-digit 13 mm LED display
- Scalable display range from 1999 to 9999 with adjustable decimal point
- IEC IP66 front panel protection for industrial applications
|
Datasheet
|
- Suitable for displaying melt pressure, temperature or differential pressure
- 160 × 80 graphical LCD display with backlight
- Colour-changing LED backlight on alarm
- Universal input for strain gauge sensors, thermocouples and linear DC or mA signals
- Optional secondary input for differential pressure measurement
- Three standard alarm outputs
- Analog retransmission of process values to other devices
- USB port for configuration access and log files
- Modbus RS-485, Modbus RTU and Modbus TCP Ethernet supported
| Datasheet |
| User Manual |
- Suitable for display and control of process or differential pressure
- Digital PID closed-loop controller
- Universal input for strain gauge sensors and linear voltage or current signals
- Optional secondary strain gauge input for differential pressure control
- Bright dual 5-digit LED display with additional 35-segment bar graph display
- Two assignable alarms, third alarm optional
- Field-configurable locally or remotely by optional Modbus/Jbus
- Digital security to prevent unauthorized use
- IP65 / NEMA 4X front panel rating for harsh environments
| Datasheet |
- Suitable for display and control of process or differential pressure
- Graphical LCD display with colour-changing LED backlight on alarm
- Single-loop control with adaptive auto-tuning algorithm
- Universal input for strain gauge sensors, thermocouples, linear DC signals and mA signals
- Optional secondary strain gauge input for differential pressure measurement
- Trend view, alarm view and event view available as standard
- USB port for configuration access and log files
- Data logging option records process values, setpoints and alarms as CSV files
- Modbus RS-485 and Modbus TCP Ethernet supported
|
Datasheet
|
- Dynisco 1496 in 1/16 DIN format and 1498 in 1/8 DIN format
- Suitable for twin and single screw extruders, hot dies and adapter zones
- Selectable for heat-only control, heat/cool control or indicator operation
- Universal input for thermocouples and 3-wire RTD
- Full PID control with pre-tune, self-tune, manual-tune or on/off control
- Up to three outputs possible for control and alarm functions
- Process and loop alarms with adjustable hysteresis
- Modbus RS485 communication with 2-wire interface
- CE, ISO and UL/ULc certifications available
 Datasheet |
| User Manual |
Dynisco Display & Control Devices
Dynisco’s display and control devices are instruments for visualizing and controlling process variables such as pressure or temperature — commonly used in industrial processes like plastic extrusion, injection molding, or general process automation. These devices take sensor or transmitter signals and convert them into readable displays (e.g. digital displays) or actionable control outputs. Thus, they enable continuous process monitoring, control loops, alarm handling and data logging — essential for safety, process control and quality assurance.
Questions & Answers about Dynisco Display & Control Devices
What are Dynisco display and control devices?
Devices that receive sensor inputs (e.g. from pressure or temperature sensors) and either display measured values (indicator) or control the process (controller), e.g. by regulating setpoints or triggering alarms.
Which process variables can they handle?
Typically pressure and temperature — depending on the connected sensor or transmitter. Many devices support various input types such as voltage, current, thermocouple, strain gauge, etc.
What functionalities can a typical controller offer?
Automatic setpoint control, heating or cooling regulation, differential-pressure control, alarm and safety functions, data logging, and communication interfaces.
How are measurements displayed?
Via digital or graphical displays, sometimes with alarm-LEDs; some models also show trends or logged events for process monitoring.
Do these devices support data logging or signal transmission?
Yes — many models offer data logging and communication interfaces (e.g. serial or bus), allowing storage of process values, alarms or events, or transmission to higher-level control systems.
What applications are typical?
Machine and plant control (e.g. extruders, injection molding machines), process monitoring, quality control, safety systems, automated control loops, or wherever pressure/temperature must be reliably monitored and controlled.
What advantages do they have over simple sensor or gauge solutions?
More automation and control, clearer display, alarm and logging capabilities, improved manageability — enhancing safety, stability and operational efficiency.
Are there different classes (indicator vs. controller)?
Yes — some devices are pure indicators (display only), while others are controllers with set-point regulation, control loops or alarm logic.
How flexible are they with regard to input and output signals?
Very flexible — they accept standard industrial input signals (voltage, current, thermocouple, strain gauge) and provide configurable outputs or communication interfaces depending on application requirements.
Why use display & control devices in a plant or process?
Because they make sensor data usable — allowing monitoring, control, safety, quality assurance and automation, which is critical to maintain stable and safe operation in complex industrial environments.