- 3 digit LED display
- Recording min./max. temerature
- Measuring ranges from -20…200°C
- Contact output DC PNP, max. 200 mA
- Analog output: 4…20 mA, 3-wires 0…10 V, 3-wires 0...20 mA, 3-wires
 Datasheet |
- Case aluminium, epoxy resin coated
- Ingress protection IP 65, NEMA 4
- Ambient temperature -40 ... +85 °C
- 1 switch point, SPDT or DPDT with a high contact rating of up to 15 A / AC 220 V
- Capillary up to 10 m
 Datasheet |
| User Manual |
- Case aluminium, epoxy resin coated
- Ingress protection IP 65, NEMA 4
- Ambient temperature -40 ... +85 °C
- 1 switch point, SPDT or DPDT with a high contact rating of up to 15 A/AC 220 V
- Capillary up to 10 m
| Datasheet |
| User Manual |
- Easily-readable, robust display
- Intuitive and fast setup
- Easy and flexible mounting configurations
| Datasheet |
- No power supply needed for switching of electrical loads
- Setting ranges from -30 ... +70°C up to 0 ... 600 °C
- Robust switch enclosure from aluminium alloy, IP 66, NEMA 4X
- 1 or 2 independent set points, SPDT or DPDT, high switching power up to AC 250 V, 20 A
- Remote mounting with capillary ≤ 10 m
| Datasheet |
| User Manual |
- Electropolished case
- Ingress protection IP 65, NEMA 4
- Ambient temperature -40 ... +85 °C
- 1 or 2 independent switch points, high contact rating up to 15 A / AC 220 V
- Directly connected or via capillary (up to 10 m capillary)
| Datasheet |
| User Manual |
- Case from AISI 316 (1.4401)
- Ingress protection IP 66, NEMA 4
- Ambient temperature -40 ... +85 °C
- 1 switch point, SPDT, up to 5 A/AC 220 V
- Directly connected or via capillary (up to 10 m capillary
| Datasheet |
| User Manual |
- No power supply needed for switching of electrical loads
- Setting ranges from -15 ... +20 °C to 180 ... 250 °C
- Repeatability of the set point ≤ 1% span
- 1 set point, SPDT, high switching power up to AC 250 V, 5 A
- Direct mounting or remote mounting with capillary ≤ 10 m
| Datasheet |
| User Manual |
| Control input signal | 0..10V= |
| Temp. setpoint range | 1 ... 10 oC |
| Output Signal | 0..10V: Input/Temp. |
| Ambient temperature | 15 ... 15 oC |
| Switch function/capacity | SPDT 250 Vac Microswitch / 8A |
| Reset function | reset inside |
| Thermostat application | frost protection thermostat, 2-phases |
| Mounting place | air duct |
| IP class | IP40 |
| Power supply | 24 Vac | 7 VA |
| Temperature element | capillary |
| Setpoint device | inside |
| Additional description | The 0-10V output signal is the maximum of the input signal and the temperature value (10-0 degrees C = 0-10V) |
| Datasheet |
| Housing material | Polycarbonate and ABS |
| Ambient temperature | -20 ... 55 oC |
| Switch function/capacity | SPDT 24..250 Vac, 15(8)A |
| Thermostat application | frost protection thermostat |
| Mounting place | air duct |
| Setpoint device | screw |
| Temp. setpoint range | -8 ... 8 oC |
| Differential fixed | 2 K |
| IP class | IP65 |
| Datasheet |
| Electrical connection | M20x1,5 |
| IP class | IP54 |
| Housing material | PA, ABS, PMMA |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | max: 230 Vac, 12 (2,5) A min: 24 Vac/dc, 100 mA |
| Capillary tube length | 2 m |
| Certificates | CE, UL, PED, DIN EN 14597 |
| Thermostat application | strap-on thermostat |
| Reset function | automatic reset |
| Setpoint device | screw |
| Mounting place | strap on pipe |
| Differential fixed | 10 K |
| Datasheet |
| Housing material | glass fibre reinforced ABS |
| Ambient temperature | -20 ... 70 oC |
| Thermostat application | room thermostat, industrial |
| Mounting place | internal wall |
| Setpoint device | knob |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | SPST 230 Vac, 10 A |
| Immersion depth | 150 mm |
| Certificates | TUEV-approval STB895 |
| Thermostat application | immersion tube thermostat |
| Reset function | reset button |
| Setpoint device | inside |
| Temp. setpoint range | 60 ... 130 oC |
| Mounting place | in pipe |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 150 oC |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | safety control switch SPDT 230 Vac, 10 A; shut-off temperature switch SPST 230 Vac, 10 A |
| Immersion depth | 150 mm |
| Certificates | TUEV-approval TR/STB 900 |
| Thermostat application | immersion tube therm. + controller |
| Reset function | reset button |
| Setpoint device | inside+outside |
| Temp. setpoint range | 30/30 ... 110/110 oC |
| Mounting place | in pipe |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 130 oC |
| Additional description | Safety control switching differential approx. 4% of setpoint value. Shut-off temperature: 30..110 oC adjustable. |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | SPDT 230 Vac, 10 A |
| Certificates | TUEV-approval STW(STB)894 S |
| Thermostat application | immersion tube thermostat |
| Reset function | automatic reset |
| Setpoint device | inside |
| Temp. setpoint range | 20 ... 150 oC |
| Mounting place | in pipe |
| Immersion depth | 150 mm |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 175 oC |
| Additional description | Fixed switching differential approx. 4% of setpoint value. |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | safety control switch SPDT 230 Vac, 10 A; shut-off temperature switch SPST 230 Vac, 10 A |
| Immersion depth | 150 mm |
| Certificates | TUEV-approval TW/STB 904 |
| Thermostat application | immersion tube therm. + monitor |
| Reset function | reset button |
| Setpoint device | 2x inside |
| Temp. setpoint range | 30/30 ... 110/110 oC |
| Mounting place | in pipe |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 130 oC |
| Additional description | Safety control switching differential approx. 3..4% of setpoint value. Shut-off temperature: 30..110 oC adjustable. |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | SPDT 230 Vac, 10 A |
| Immersion depth | 150 mm |
| Certificates | TUEV-approval TW 89 207 |
| Thermostat application | immersion tube thermostat |
| Reset function | automatic reset |
| Setpoint device | inside |
| Temp. setpoint range | 20 ... 150 oC |
| Mounting place | in pipe |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 175 oC |
| Datasheet |
| IP class | IP54 |
| Housing material | Aluminium diecasting with plastic cover |
| Ambient temperature | 0 ... 80 oC |
| Switch function/capacity | safety control switch SPDT 230 Vac, 10 A; shut-off temperature switch SPST 230 Vac, 10 A |
| Immersion depth | 150 mm |
| Certificates | TUEV-approval TR/STB 900 |
| Thermostat application | immersion tube therm. + controller |
| Reset function | reset button |
| Setpoint device | inside+outside |
| Temp. setpoint range | 30/30 ... 110/110 oC |
| Mounting place | in pipe |
| Immersion well material | red brass, nickel plated |
| Immersion well thread | R1/2" |
| Max. perm. temp. at sensor | 130 oC |
| Additional description | Safety control switching differential approx. 4% of setpoint value. Shut-off temperature: 30..110 oC adjustable. |
| Datasheet |
