- Dual-channel pressure controller housing (for use with two PACE CM control modules)
- Supports single, dual, and auto-range pressure control
- High pressure control speed – fills 300 cm³ in just 5 seconds*
- Pressure ranges up to 210 bar (3000 psi / 21 MPa), gauge and absolute
- Precision up to 0.001% of full scale (FS) over the calibrated temperature range
- Long-term stability from 0.001% of full scale (FS)
- Optional barometric reference available
- 28 selectable pressure units and four user-defined units
- Automated functions: switch test, leak test, test program, burst test
- Analog output signals and voltage-free (dry contact) relay outputs
- Aeronautical option for pressure, altitude, airspeed, Mach number, and rate of climb (PACE 6000 only)
- Negative calibration of the measurement range included as standard
- 7-inch color touchscreen with VGA resolution
- Intuitive, task-based menu navigation
- Compatible with calibration and control software
- RS232, IEEE-488, Ethernet, and USB as standard communication interfaces
- Modular system with interchangeable CM control modules
- Wide selection of pressure ranges and accuracy classes (Standard, High, Premium, Reference)
- Digital control for high stability and fast response times
![]() |
- Choice of enclosures and interchangeable control modules
- Configurations with single, dual, or auto-range control modules
- High-speed pressure control – 5 seconds to fill 300 CC*
- Up to 210 bar (3000 psi / 21 MPa) gauge and absolute pressure
- Precision up to 0.001 % of full scale (FS) over the calibrated temperature range
- Accuracy – see CM3 accuracy table:
- 2, 3.5 bar: 0.0016 % of reading + 0.0033 % FS
- 8–71 bar: 0.0011 % of reading + 0.0026 % FS
- Long-term stability from 0.001 % of full scale (FS)
- Optional barometric reference
- Utilizes DRUCK’s new, unique sensor range
- 28 selectable pressure units and four user-defined units
- Switch test, leak test, test program, burst test, analog output, and voltage-free (dry contact) relays
- Aeronautical option
- Negative calibration of the instrument included as standard
- High-resolution color touchscreen for operation
- Intuitive, task-oriented menu structure
- Compatible with software packages
- RS232, IEEE connectivity, Ethernet, and USB as standard
![]() |
- Single or multiple pressure range configurations available
- Up to three pressures displayed simultaneously
- Utilizes Druck’s innovative piezo-resistive and resonant pressure sensor technology
- Pressure measurement ranges up to 1000 bar (14,500 psi / 100 MPa)
- Precision selectable up to 0.001% Full Scale (FS)
- Long-term stability up to 0.001% FS per year
- Optional barometric reference
- Airfield task as standard with barometer option: Display QFE, QFF, or QNH in pressure units or altitude in feet/meters
- Negative gauge calibration included as standard
- Data logging as standard with on-screen replay
- Selectable numeric or graphic display
- High-resolution touchscreen
- Intuitive icon-driven menu structure
- Switch test/analogue output option
- Switch test/voltage-free contact option
- Aeronautical option
- Leak test option
- RS232, IEEE, Ethernet, and USB interfaces as standard
- Min/Max/Average value display
- Compatible with software packages
- 28 selectable pressure units plus 4 user-defined units
- Various service and support options available
![]() |
![]() |
- Pressure ranges: 1 ... 1,000 mbar (0.01 ... 14.5 psi)
- Accuracy: to 0.1 % FS
- Integrated, automatic pressure generation
- Portable, also usable without power supply unit due to Li-Ion battery
- Simple operation
![]() |
![]() |
- Pressure ranges: -1 ... 210 bar [-15 ... 3,045 psi]
- Control speed < 4 seconds for 25 % FS steps
- Accuracy: to 0.02 % FS
- PACE emulation
![]() |
![]() |
- Pressure ranges: -1 ... 210 bar (-15 ... 3,045 psi)
- Control speed 10 s
- Control stability < 0.005 % FS
- Accuracy to 0.02 % IS (IntelliScale)
- Precision 0.008 % FS
![]() |
![]() |
- Pressure ranges: -1 ... 210 bar (-15 ... 3,045 psi)
- Control speed 15 s
- Control stability < 0.003 % FS (typical 0.001 % FS)
- Accuracy down to 0.01 % IS (IntelliScale)
- Precision 0.004 % FS
![]() |
![]() |
- Pressure ranges: 0 ... 700 bar (0 ... 10,000 psi)
- Control speed 30 s
- Control stability 0.008 % FS
- Accuracy down to 0.01 % IS (IntelliScale)
![]() |
![]() |
- Interchangeable reference sensors that can be changed via the front
- Large colour touchscreen with all necessary information
- Control stability 0.001 % of span
- Accuracy up to 0.009 % IS-50 (IntelliScale)
![]() |
- Pressure ranges: -1 ... 210 bar [-15 ... 3,045 psi]
- Control speed < 4 seconds for 25 % FS steps
- Accuracy: to 0.02 % FS
- PACE emulation
- On-site selection of pressure range from the GENii PM620/PM620T pressure module family.
- Built-in barometer for accurate pseudo-pressure measurement.
- Hybrid pressure generation and control from -0.9 barg (-13 psi) to 20 barg (300 psi).
- Automatic selection between manual pressure generation, automatic generation, or venting with large test volume capacity.
- Fully automatic pressure generation and control for precise setpoint maintenance.
- Minimization of field leaks using quick-fit pressure adapters.
- Physical or *Bluetooth® wireless connection to a DPI620G electrical calibrator.
- Field-replaceable rechargeable battery pack.
- Autonomous calibration assistant for storing procedures and calibration data.
![]() |
![]() |
The Additel 760 series Automatic Handheld Pressure Calibrator takes portable pressure calibration to new levels. Weighing less than 4 lbs (1.8 kg), the ADT760’s innovative design contains a built-in pump, precision pressure sensor, internal controller and a large touch-screen color display.
![]() |
![]() |
![]() |
At Additel, innovation and continuous improvement are part of our company's culture and the products we introduce. When we set out to deliver the Additel 761A series calibrators, we knew we needed to provide breakthrough additional value to the existing line of calibrators (Additel 761 series).
![]() |
![]() |
![]() |
- Automated pressure generation and control to 10,000 psi (700 Bar)
- Accuracy to 0.01%FS
- Dual-range manual or auto select
- Control stability ≤ 0.005%FS
- Portable - designed for use in the field and in the lab
- Control by optional external pressure modules
- Supports two external pressure modules
- Wi-Fi, LAN, Bluetooth, USB and Ethernet communication
- Full HART field communicator
- HART and PROFIBUS communication
- Data logging and task management
- Patented electric pump technology
![]() |
- Pressure ranges from vacuum to 200 bar (3000 psi)
- Removable interchangeable intelligent sensors
- Precision accuracy of 0.005% of reading +0.005% of full scale
- Standalone solution up to 70 bar, no gas bottle required when used with the electric pump
- Standard model accuracy of 0.02% of full scale
- External pressure modules to 200 bar (3000 psi)
- WiFi enabled communications
- Fully temperature compensated accuracy from 0°C to 50°C
- HART communication and Profibus PA
- Large 7” color touch screen display
- Control stability of 0.003% FS
- Built-in barometer
- Easy-to-use icon based user interface
![]() |
![]() |
- Gas Pressure System
- Range from -1 to 1000 bar
- Setting the variable volume with hub
- Pressure Gauge (digital or analog possible)
- Individuelle Prüfeinrichtung für Werkstatt, Prozess und Service
- Automatische Druckregler PACE 5000/ PACE 6000 integriert
- Für wählbare Messbereiche von -1 … 0 … +210 bar
- Automatische Vorgabe der Prüfpunkte, Rampen über Touchscreen
- Genauigkeit: 0,05 bis zu 0,0015 % FS
- Großes TFT-Touchscreen
- Eingebaute N2-Stickstoffflasche mit präzisem manuellen Druckregler (auf Wunsch externe Druckflasche)
- Eingebaute Vakuumpumpe für Unterdruck / Absolutdruck (auf Wunsch auch ohne Vakuumpumpe)
- Eingebaut analog Manometer für Vakuum, Überdruck und Flaschendruck
- Externe Nachfüllung der N2_Stickstoffflasche über Minimess
- Prüflingsanschluss über Minimess-Schnellkupplung
- Betrieb an Netz 230 V AC 50 Hz oder Batterie-Betrieb
- Robuster abschließbarer Alukoffer
![]() |
