Showing all 9 results

  • Sealed, pressure retaining design
  • Density range from 340 kg/m³
  • Pressures up to 400 bar
  • Medium temperatures from -196 ... +450 °C
  • Versions for interface layer
Datasheet
User Manual

  • Proper functioning, even under extreme environmental influences, e.g. dirt, humidity, gases, dust, chips
  • Compact and operationally safe design
  • Mounting of the switches at the magnetic display with T-slot or with tightening strap
  • Process temperature of -60 ... +380 °C (depending on version)
Datasheet
Datasheet
User Manual
User Manual
User Manual

  • Continuous level measurement on the outside of the bypass
  • 2-wire technology 4 ... 20 mA
  • Measured value output via digital interface and a selectable measured value as analogue signal
  • Case from stainless steel (display from glass)
  • Magnetostrictive level measuring instrument with high resolution
Datasheet
User Manual
User Manual
User Manual

  • Installation of head-mounted transmitters in the connection housing possible
  • Wide variety of different electrical connections, process connections, materials and contact separations
  • Programmable and configurable head-mounted transmitters for 4 ... 20 mA, HART®, PROFIBUS® PA or FOUNDATION™ Fieldbus field signals
  • Explosion-protected versions
  • Temperature ranges from -100 … +350 °C
Datenblatt
Datenblatt
Datenblatt
Bedienungsanleitung
Bedienungsanleitung
Bedienungsanleitung

  • Measured value display by means of rollers or flaps with permanent magnets
  • Medium temperatures from -200 ... +450 °C
  • Splash-proof or hermetically sealed
  • Without power supply
  • Hermetically sealed from the process
Datasheet
Datasheet
Datasheet

  • Simple mounting of the illumination system
  • Illumination types available for different applications
  • Operating temperature: depending on illumination method
  • Matching to the respective length of the glass indicator
Datasheet
User Manual

  • Magnetic switches work properly under extreme environmental influences, e.g. dirt, humidity, gases, dust, chips etc.
  • Stable switch point, reproducible switch point accuracy 0.01 mm
  • Reed contact can be actuated from several directions
  • Can be mounted in any orientation
  • Can be actuated in a voltage-free condition, bistable variants can save signals and are particularly suitable for extremely long stroke lengths
Datasheet
User Manual

  • IIoT-capable with LoRaWAN® transmission
  • Battery-operated LoRa® radio transmission based on LPWAN technology
  • High transmission range for the measured values (up to 10 km) with long battery life (up to 10 years)
  • Exchange of the radio unit possible in ATEX zones
Datasheet
User Manual

Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
This site is registered on wpml.org as a development site.