Digital indicator IM3 Shunt 48 x 24 mm


 

Housing 48 x 24 mm
Display 5-digit
10 mm digit height
Colour: red, green, orange or blue display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input 0-60 mV / span -5 to 75 mV
0-150 mV / span -15 to 180 mV
0-300 mV / span -30 to 360 mV
0-1000 mV /span -100 to 1200 mV
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Alternatively digital input
Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
Interface –
Power supply 24 VDC galvanic isolated
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply –
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • navigation keys for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • constant setting/setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Datasheet
User Manual
Add to your Quote List

The IM3-7VR5A.0002.S70xD is a 5-digit meter for measuring
direct voltage signals via a Shunt input and a visual limit value monitoring via the display. The configuration happens via three front keys or via the optional PC-software PM-TOOL. Optionally, one analog output, the interfaces RS232/RS485, one digital input and two switching points are available. Selectable software functions and a direct limit value adjustment in operating mode complete the modern device concept.

Housing 48 x 24 mm
Display 5-digit
10 mm digit height
Colour: red, green, orange or blue display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input 0-60 mV / span -5 to 75 mV
0-150 mV / span -15 to 180 mV
0-300 mV / span -30 to 360 mV
0-1000 mV /span -100 to 1200 mV
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Alternatively digital input
Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
Interface –
Power supply 24 VDC galvanic isolated
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply –
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • navigation keys for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • constant setting/setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code

 









IM3 - 5-stelliges digitales Einbauinstrument in 48x24 mm , Gleichspannungssignale – Shunt 60 mV, 150 mV, 300 mV, 1000 mV
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Digital indicator IM3 Shunt 48 x 24 mm

    IM3 - 5-stelliges digitales Einbauinstrument in 48x24 mm , Gleichspannungssignale – Shunt 60 mV, 150 mV, 300 mV, 1000 mV

     

    Housing 48 x 24 mm
    Display 5-digit
    10 mm digit height
    Colour: red, green, orange or blue display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input 0-60 mV / span -5 to 75 mV
    0-150 mV / span -15 to 180 mV
    0-300 mV / span -30 to 360 mV
    0-1000 mV /span -100 to 1200 mV
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Alternatively digital input
    Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
    Interface –
    Power supply 24 VDC galvanic isolated
    100-240 VAC 50/60 Hz / DC +/- 10%
    Sensor supply –
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • navigation keys for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarm system with adjustable delay times
    • volume metering (Totaliser)
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • constant setting/setpoint setting
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code
    Datasheet
    User Manual
    Add to your Quote List

    The IM3-7VR5A.0002.S70xD is a 5-digit meter for measuring
    direct voltage signals via a Shunt input and a visual limit value monitoring via the display. The configuration happens via three front keys or via the optional PC-software PM-TOOL. Optionally, one analog output, the interfaces RS232/RS485, one digital input and two switching points are available. Selectable software functions and a direct limit value adjustment in operating mode complete the modern device concept.

    Housing 48 x 24 mm
    Display 5-digit
    10 mm digit height
    Colour: red, green, orange or blue display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input 0-60 mV / span -5 to 75 mV
    0-150 mV / span -15 to 180 mV
    0-300 mV / span -30 to 360 mV
    0-1000 mV /span -100 to 1200 mV
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Alternatively digital input
    Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
    Interface –
    Power supply 24 VDC galvanic isolated
    100-240 VAC 50/60 Hz / DC +/- 10%
    Sensor supply –
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • navigation keys for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarm system with adjustable delay times
    • volume metering (Totaliser)
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • constant setting/setpoint setting
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code

     









    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info