IPU5 Multifunction meter 96 x 48 mm


The IPU5.000X.1W70 is a 5-digit meter for direct connection of different sensors. The configuration takes place via 4 front keys or the optional PC software PM-TOOL. To monitor limit values, up to 4 changeover relays, a transmitter supply, the interfaces RS232/RS485 for data transfers from/to the device and analog outputs 0-10 VDC, 4-20 mA or 0-20 mA are optionally available for further evaluation. A HOLD/TARA function via keyboard, many selectable software functions and a 24-bit resolution characterize a proven device for industrial use.

Datasheet
User Manual
Add to your Quote List
Housing 96 x 48 mm
Display 5-digit
14 mm digit height
Colour: red
Range displayed -9999…99999
Operation front panel keyboard protection class IP54
Input Voltage 0-10 VDC
Current 0/4-20 mA
Shunt 15, 35, 75, 150, 300, 500, 1250, 2500 mV
Pt100 2-/3-/4-wire -200,0…850,0°C
Thermocouple type L, J, K, B, S, N, E, R, T
Resistance 100 Ohm, 1 kOhm, 10 kOhm
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0-20 mA Burden ≤500 Ohm 12 Bit
4-20 mA Burden ≤500 Ohm 12 Bit
0-10 VDC Burden ≥100 kOhm 12 Bit
Switch point 2 or 4 relays (change-over contacts)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 10-40 VDC / 18-30 VAC 50/60Hz
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply 24 VDC / 50 mA
10 VDC / 20 mA
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • volume metering (Totaliser)
  • sliding averaging
  • zero-point slowdown
  • adjustable display brightnes
  • selectable display mode
  • hold-/tara function
  • flexible alarm system with adjustable delay times
  • programming interlock via access code








IPU5 Multifunction meter 96 x 48 mm
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    IPU5 Multifunction meter 96 x 48 mm

    IPU5 Multifunction meter 96 x 48 mm

    The IPU5.000X.1W70 is a 5-digit meter for direct connection of different sensors. The configuration takes place via 4 front keys or the optional PC software PM-TOOL. To monitor limit values, up to 4 changeover relays, a transmitter supply, the interfaces RS232/RS485 for data transfers from/to the device and analog outputs 0-10 VDC, 4-20 mA or 0-20 mA are optionally available for further evaluation. A HOLD/TARA function via keyboard, many selectable software functions and a 24-bit resolution characterize a proven device for industrial use.

    Datasheet
    User Manual
    Add to your Quote List
    Housing 96 x 48 mm
    Display 5-digit
    14 mm digit height
    Colour: red
    Range displayed -9999…99999
    Operation front panel keyboard protection class IP54
    Input Voltage 0-10 VDC
    Current 0/4-20 mA
    Shunt 15, 35, 75, 150, 300, 500, 1250, 2500 mV
    Pt100 2-/3-/4-wire -200,0…850,0°C
    Thermocouple type L, J, K, B, S, N, E, R, T
    Resistance 100 Ohm, 1 kOhm, 10 kOhm
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0-20 mA Burden ≤500 Ohm 12 Bit
    4-20 mA Burden ≤500 Ohm 12 Bit
    0-10 VDC Burden ≥100 kOhm 12 Bit
    Switch point 2 or 4 relays (change-over contacts)
    250 V / 5 AAC, 30 V / 5 ADC
    Interface RS232 or RS485 galvanic isolated
    Power supply 10-40 VDC / 18-30 VAC 50/60Hz
    100-240 VAC 50/60 Hz / DC +/- 10%
    Sensor supply 24 VDC / 50 mA
    10 VDC / 20 mA
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • volume metering (Totaliser)
    • sliding averaging
    • zero-point slowdown
    • adjustable display brightnes
    • selectable display mode
    • hold-/tara function
    • flexible alarm system with adjustable delay times
    • programming interlock via access code








    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info