SITRANS TH320 transmitters


  • Compact design
  • Flexible mounting and center hole allow you to select your preferred type of installation
  • Galvanic isolation
  • Test terminals for ammeter
  • Diagnostics LED (green/red)
  • Input monitoring
           Wire break and short-circuit
  • Self-monitoring
  • Configuration status stored in EEPROM
  • SIL2/3 (with order note C20)
  • Expanded diagnostic functions, such as slave pointer, operating hours counter, etc.
  • Special characteristic
  • Electromagnetic compatibility according to DIN EN 61326 and NE21
Datasheet
User Manual
Add to your Quote List

2-wire head transmitter with and without HART communications interface for mounting in the connection head of the temperature sensor.

Application
SITRANS TH320 transmitters can be used in all sectors. Its compact size means that it can be installed in connection heads of
type B or larger. The following sensors/signal sources can be connected over their universal input module:

  • Resistance thermometer (2-wire, 3-wire, 4-wire connection)
  • Thermocouples
  • Linear resistance, potentiometer and DC voltage sources
          With HART communications interface:
  • The output signal is a load-independent direct current from 4 to 20 mA in accordance with the input characteristic, superimposed by the digital HART signal.

 

Transmitters of the “intrinsically safe or Zone 2 increased safety” type of protection can be installed in hazardous areas. The device meets the requirements of the EU Directive 2014/34/EU
(ATEX), the FM and CSA regulations as well as other national approvals.





SITRANS TH320 transmitters
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    SITRANS TH320 transmitters

    SITRANS TH320 transmitters
    • Compact design
    • Flexible mounting and center hole allow you to select your preferred type of installation
    • Galvanic isolation
    • Test terminals for ammeter
    • Diagnostics LED (green/red)
    • Input monitoring
             Wire break and short-circuit
    • Self-monitoring
    • Configuration status stored in EEPROM
    • SIL2/3 (with order note C20)
    • Expanded diagnostic functions, such as slave pointer, operating hours counter, etc.
    • Special characteristic
    • Electromagnetic compatibility according to DIN EN 61326 and NE21
    Datasheet
    User Manual
    Add to your Quote List

    2-wire head transmitter with and without HART communications interface for mounting in the connection head of the temperature sensor.

    Application
    SITRANS TH320 transmitters can be used in all sectors. Its compact size means that it can be installed in connection heads of
    type B or larger. The following sensors/signal sources can be connected over their universal input module:

    • Resistance thermometer (2-wire, 3-wire, 4-wire connection)
    • Thermocouples
    • Linear resistance, potentiometer and DC voltage sources
            With HART communications interface:
    • The output signal is a load-independent direct current from 4 to 20 mA in accordance with the input characteristic, superimposed by the digital HART signal.

     

    Transmitters of the “intrinsically safe or Zone 2 increased safety” type of protection can be installed in hazardous areas. The device meets the requirements of the EU Directive 2014/34/EU
    (ATEX), the FM and CSA regulations as well as other national approvals.





    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info