EX-DGM506 Explosion-Proof Gas Pressure Switch 15…60 mbar | FEMA Pressure Switch


  • Explosion-Proof Gas Pressure Switch 15…60 mbar
  • The DGM series is calibrated for rising pressure.
  • The adjustable switching pressure on the scale corresponds to the switching point at rising pressure.
  • The reset point is lower by the amount of the switching differential.
  • Suitable for maximum and minimum pressure monitoring.

Datasheet
Operating Instructions
Add to your Quote List

Ex-DGM Gas Pressure Switches for Fuel Gases

DVGW-approved gas pressure switches according to DIN EN 1854 are suitable for all gases specified in DVGW Code of Practice G 260 as well as for air.

Ex-DGM gas pressure switches for fuel gases are DVGW-approved according to DIN EN 1854 and suitable for all gases specified in DVGW Code of Practice G 260 as well as for air. They are supplied with a robust housing made of seawater-resistant GD Al Si 12 die-cast aluminum. The switching differential is largely dependent on the selected switching pressure and is not adjustable.

Certifications

  • CE-0085 AQ 1088 according to EU/2009/142/EC (30.11.2009) and DIN EN 1854 (01.07.2006)
  • IBExU12ATEX1040 according to ATEX 2014/34/EU
  • SIL2 according to IEC 61508-2

Datasheets






EX-DGM516 Ex-Gasdruckwächter 40–160 mbar
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    EX-DGM506 Explosion-Proof Gas Pressure Switch 15…60 mbar | FEMA Pressure Switch

    EX-DGM516 Ex-Gasdruckwächter 40–160 mbar
    • Explosion-Proof Gas Pressure Switch 15…60 mbar
    • The DGM series is calibrated for rising pressure.
    • The adjustable switching pressure on the scale corresponds to the switching point at rising pressure.
    • The reset point is lower by the amount of the switching differential.
    • Suitable for maximum and minimum pressure monitoring.

    Datasheet
    Operating Instructions
    Add to your Quote List

    Ex-DGM Gas Pressure Switches for Fuel Gases

    DVGW-approved gas pressure switches according to DIN EN 1854 are suitable for all gases specified in DVGW Code of Practice G 260 as well as for air.

    Ex-DGM gas pressure switches for fuel gases are DVGW-approved according to DIN EN 1854 and suitable for all gases specified in DVGW Code of Practice G 260 as well as for air. They are supplied with a robust housing made of seawater-resistant GD Al Si 12 die-cast aluminum. The switching differential is largely dependent on the selected switching pressure and is not adjustable.

    Certifications

    • CE-0085 AQ 1088 according to EU/2009/142/EC (30.11.2009) and DIN EN 1854 (01.07.2006)
    • IBExU12ATEX1040 according to ATEX 2014/34/EU
    • SIL2 according to IEC 61508-2

    Datasheets






    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info