Gauge Snubbers

AS-Schneider Gauge Snubbers are used to improve the output or readability of the instrument, and to reduce the effect of pressure surges on the instrument.

They also limit the external discharge of the pressure medium, in the event a discontinuity should occur on the instrument side of the snubber. Closing the valve increases the dampening action.

The max. allowable (Working) Pressure (PS) is 400 bar (5,801 psi), the max. allowable Temperature (TS) is 120°C (248°F).

Datasheet

Datasheet

Add to your Quote List

Description
Downloads

*The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.

Gauge Snubbers with Parallel Threads

Inlet	Outlet	Material	PN	L	WAF	References	Part Number
G 1/4 Male	G 1/4 Female	Brass	250	62.5	27		S005.10.030.01
		Carbon Steel	400	61			S005.10.130.01
		1.4571	400	61		NACE	S005.10.230.01
G 3/8 Male	G 3/8 Female	Brass	250	62.5			S005.10.020.01
G 3/8 Male	G 3/8 Female	1.4571	400	61		NACE	S005.10.220.01
G 1/2 Male	G 1/2 Female	Brass	400	62.5			S005.10.000
		Carbon Steel	400	61			S005.10.100
		1.4571	400	61		NACE	S005.10.200
M 20 x 1.5 Male	M 20 x 1.5 Female	Brass	400	62.5			S005.10.050
		Carbon Steel	400	61			S005.10.150
		1.4571	400	61		NACE	S005.10.250

Gauge Snubbers with NPT Threads

Inlet	Outlet	Material	PN	L	WAF	References	Part Number
1/4 NPT Male	1/4 NPT Female	Brass	250	61	27		S005.10.031.01
1/4 NPT Male	1/4 NPT Female	1.4571	600			NACE	S005.10.231.01
1/2 NPT Male	1/2 NPT Female	Brass	250				S005.10.010
		Carbon Steel	400				S005.10.110
		1.4571				NACE	S005.10.210
		316				NACE	S005.10.410
		Duplex		32		NACE	S005.10.810.0001
		Alloy 625		32		NACE	S005.10.810.0009
		Alloy 400		27		NACE	S005.10.910.0001
		Alloy C-276		32		NACE	S005.10.910.0005

WAF = Width Across Flats | 27 = Hex, 32 = Square

Datasheets

Technical advice: 03303 / 50 40 66

Technical advice for this product