Bargraph display IMB2 Standard signals 96 x 96 mm


Housing 96 x 96 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
55 dots bargraph display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input 0/4-20 mA / Span -22…24 mA
0-10 VDC / Span -12…12 VDC
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
10-40 VDC / 18-30 VAC 50/60Hz
Sensor supply 24 VDC / 50 mA
10 VDC / 20 mA
Software properties
  • adjustable bar- or dot operation or operation with permanent midpoint display
  • min/max-memory with adjustable permanent display
  • display flashing at threshold value exceedance/undercut
  • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarms system with adjustable delay times
  • volume metering (Totaliser)
  • mathematical functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code
Datasheet
User Manual
Add to your Quote List

The IMB2-2VR5VR.0001.S72xD is a 55 points bargraph with a 5-digit digital display and two galvanic insulated switching points; designed for direct voltage/direct current signals. The configuration happens via 4 front keys or via PM-TOOL, the
optional PC-software. Optional available are one sensor supply, one digital input for triggering of Hold (Tara), one analog output or one interface. The electrical connection happens on the rear side via plug-in terminals. Many selectable software functions, a direct limit value adjustment in operating mode and different display options like e.g. bar or dot operation for the bargraph fullfill the standard of a modern device.

Housing 96 x 96 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
55 dots bargraph display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input 0/4-20 mA / Span -22…24 mA
0-10 VDC / Span -12…12 VDC
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
10-40 VDC / 18-30 VAC 50/60Hz
Sensor supply 24 VDC / 50 mA
10 VDC / 20 mA
Software properties
  • adjustable bar- or dot operation or operation with permanent midpoint display
  • min/max-memory with adjustable permanent display
  • display flashing at threshold value exceedance/undercut
  • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarms system with adjustable delay times
  • volume metering (Totaliser)
  • mathematical functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code

 









Bargraph display IMB2 Standard signals 96 x 96 mm
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Bargraph display IMB2 Standard signals 96 x 96 mm

    Bargraph display IMB2 Standard signals 96 x 96 mm
    Housing 96 x 96 mm
    Display 5-digit
    14 mm digit height
    Colour: red, green, orange or blue display
    55 dots bargraph display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input 0/4-20 mA / Span -22…24 mA
    0-10 VDC / Span -12…12 VDC
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Switch point 2 relays (change-over contact)
    250 V / 5 AAC, 30 V / 5 ADC
    Interface RS232 or RS485 galvanic isolated
    Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
    10-40 VDC / 18-30 VAC 50/60Hz
    Sensor supply 24 VDC / 50 mA
    10 VDC / 20 mA
    Software properties
    • adjustable bar- or dot operation or operation with permanent midpoint display
    • min/max-memory with adjustable permanent display
    • display flashing at threshold value exceedance/undercut
    • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarms system with adjustable delay times
    • volume metering (Totaliser)
    • mathematical functions like reciprocal value, root extraction, squaring and rounding
    • sliding averaging
    • programming interlock via access code
    Datasheet
    User Manual
    Add to your Quote List

    The IMB2-2VR5VR.0001.S72xD is a 55 points bargraph with a 5-digit digital display and two galvanic insulated switching points; designed for direct voltage/direct current signals. The configuration happens via 4 front keys or via PM-TOOL, the
    optional PC-software. Optional available are one sensor supply, one digital input for triggering of Hold (Tara), one analog output or one interface. The electrical connection happens on the rear side via plug-in terminals. Many selectable software functions, a direct limit value adjustment in operating mode and different display options like e.g. bar or dot operation for the bargraph fullfill the standard of a modern device.

    Housing 96 x 96 mm
    Display 5-digit
    14 mm digit height
    Colour: red, green, orange or blue display
    55 dots bargraph display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input 0/4-20 mA / Span -22…24 mA
    0-10 VDC / Span -12…12 VDC
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Switch point 2 relays (change-over contact)
    250 V / 5 AAC, 30 V / 5 ADC
    Interface RS232 or RS485 galvanic isolated
    Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
    10-40 VDC / 18-30 VAC 50/60Hz
    Sensor supply 24 VDC / 50 mA
    10 VDC / 20 mA
    Software properties
    • adjustable bar- or dot operation or operation with permanent midpoint display
    • min/max-memory with adjustable permanent display
    • display flashing at threshold value exceedance/undercut
    • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarms system with adjustable delay times
    • volume metering (Totaliser)
    • mathematical functions like reciprocal value, root extraction, squaring and rounding
    • sliding averaging
    • programming interlock via access code

     









    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info