Bargraph display IMB2 Frequency 96 x 96 mm

Housing 96 x 96 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
55 dots bargraph display
Range displayed 0 to 99999
Operation front panel keyboard protection class IP65
Input Frequency 0,01 Hz to 999,99 kHz
3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
10-40 VDC / 18-30 VAC 50/60Hz
Sensor supply 24 VDC / 50 mA, incl. digital input
12 VDC / 50 mA. incl. digital input
Software properties
  • adjustable bar- or dot operation or operation with permanent midpoint display
  • min/max-memory with adjustable permanent display
  • display flashing at threshold value exceedance/undercut
  • Schmitt-Trigger-input
  • digital frequency filter for contact bounce suppression and interference suppresion
  • frequency filter with varying pulse-duty factor
  • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarms system with adjustable delay times
  • volume metering (Totaliser) for frequencies up to 1kHz pulse precisely
  • mathematical functions like reciprocal value, root extraction, squaring and rounding
  • constant setting / setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Datasheet
User Manual
Add to your Quote List

The IMB2-1FR5B.0307.S72xD is a 5-digit display with a 270°
bargraph for measuring of pulses via incremental encoder, NPN/PNP or Namur sensors and visual limit value monitoring via the display. The configuration happens via 4 front keys or via the optional PC-software PM-TOOL. The device is equipped with 2 switching outputs. The integrated direct voltage output serves as supply for possible sensors. Available options are one analog output, the interfaces RS232/RS485 and one pulse input. Many selectable software functions and the direct limit value adjustment in operating mode complete the modern device concept.

Housing 96 x 96 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
55 dots bargraph display
Range displayed 0 to 99999
Operation front panel keyboard protection class IP65
Input Frequency 0,01 Hz to 999,99 kHz
3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface RS232 or RS485 galvanic isolated
Power supply 100-240 VAC 50/60 Hz / DC +/- 10%
10-40 VDC / 18-30 VAC 50/60Hz
Sensor supply 24 VDC / 50 mA, incl. digital input
12 VDC / 50 mA. incl. digital input
Software properties
  • adjustable bar- or dot operation or operation with permanent midpoint display
  • min/max-memory with adjustable permanent display
  • display flashing at threshold value exceedance/undercut
  • Schmitt-Trigger-input
  • digital frequency filter for contact bounce suppression and interference suppresion
  • frequency filter with varying pulse-duty factor
  • adjustable zero-key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarms system with adjustable delay times
  • volume metering (Totaliser) for frequencies up to 1kHz pulse precisely
  • mathematical functions like reciprocal value, root extraction, squaring and rounding
  • constant setting / setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
More info Accept