- Measurement principle: compression force
- Output signal 4 … 20 mA
- Electrical connection: 5-pin device connector, M16 x 0.75
- Protection class (EN 60529 / IEC 529) IP 65
- Housing material: steel
- Signal type: three-wire
- Supply voltage Ub 10 … 30 VDC
- Current consumption < 50 mA
- Error limit (23 °C) < 0.5 % of full scale
- Operating load 130 % of full scale
- Limit load 150 % of full scale
- Breaking load 300 % of full scale
- Max. dynamic load 70 % (according to DIN 50100)
- Rated measuring displacement 0.1 mm
- Temperature coefficient 0.2 % / 10 K
- Calibration in N
- Calibration tolerance < 0.5 % of full scale
- Ambient temperature 0 … +60 °C (sensor -30 … +80 °C)
- Storage temperature 0 … +60 °C
- EMC test IEC 801-2/4/5, EN 55011, EN 55022
HySense FO310 – Force Sensors Based on the Compression Force Principle
- Measurement principle: compression force
- Output signal 4 … 20 mA
 Data sheet
|
|
Catalog excerpt
|
- Measurement principle: compression force
- Output signal 4 … 20 mA
- Electrical connection: 5-pin device connector, M16 x 0.75
- Protection class (EN 60529 / IEC 529) IP 65
- Housing material: steel
- Signal type: three-wire
- Supply voltage Ub 10 … 30 VDC
- Current consumption < 50 mA
- Error limit (23 °C) < 0.5 % of full scale
- Operating load 130 % of full scale
- Limit load 150 % of full scale
- Breaking load 300 % of full scale
- Max. dynamic load 70 % (according to DIN 50100)
- Rated measuring displacement 0.1 mm
- Temperature coefficient 0.2 % / 10 K
- Calibration in N
- Calibration tolerance < 0.5 % of full scale
- Ambient temperature 0 … +60 °C (sensor -30 … +80 °C)
- Storage temperature 0 … +60 °C
- EMC test IEC 801-2/4/5, EN 55011, EN 55022
Technical advice: 03303 / 50 40 66
Technical advice for this product
Related Products
Dynarope HF36 – Tension meter for high capacities
Dynarope HF37 – Compact, lightweight and handy device for low capacities
Dynasafe Mecha
Handifor digital weigher
Dynafor™ Pro
Dynafor Expert
Dynafor Industrial
Tractive force indicator dynarope
HySense FO210 – Force sensor
FH-EXT – Force-measurement device with external, high-resolution measuring cell for small loads
FK – Robust Push/Pull force gauge for simple measurement
