| Frost protection thermostats are installed on the air side for the purpose of protecting air conditioning units, heat exchangers, radiators, and similar installations against damages due to frost or freezing. |
TWO-STAGE FROST PROTECTION THERMOSTAT (FTSE)
| Control input signal | 0..10V= |
| Temp. setpoint range | 1 … 10 oC |
| Output Signal | 0..10V: Input/Temp. |
| Ambient temperature | 15 … 15 oC |
| Switch function/capacity | SPDT 250 Vac Microswitch / 8A |
| Reset function | reset inside |
| Thermostat application | frost protection thermostat, 2-phases |
| Mounting place | air duct |
| IP class | IP40 |
| Power supply | 24 Vac | 7 VA |
| Temperature element | capillary |
| Setpoint device | inside |
| Additional description | The 0-10V output signal is the maximum of the input signal and the temperature value (10-0 degrees C = 0-10V) |
 Datasheet
|
| Frost protection thermostats are installed on the air side for the purpose of protecting air conditioning units, heat exchangers, radiators, and similar installations against damages due to frost or freezing. |
Technical advice: 03303 / 50 40 66
Technical advice for this product
Related Products
WIKA Model A2G-65 Frost protection thermostat
ITM63 Digital Thermometer
SAFETY LIMITING THERMOSTAT WITH SETPOINT KNOB, SHUT-OFF (STBTR)
SAFETY LIMITING THERMOSTAT, AUTOMATIC RESET (TWP1)
SAFETY LIMITING THERMOSTAT, WITH SHUT-OFF (STBTW)
SAFETY LIMITING THERMOSTAT, HAND RESET, LARGE RANGE (STW1)
SAFETY LIMITING THERMOSTAT WITH SETPOINT KNOB, SHUT-OFF (STBTR)
SAFETY LIMITING THERMOSTAT, WITH HAND RESET (STB1)
ROOM THERMOSTAT, INDUSTRIAL, 1/2 STAGES (T6120)
SAFETY STRAP-ON THERMOSTAT FOR FLOOR HEATING APPLICATIONS (STW / STB) INCLUDING 2M CAPILLARY (TUBE)
SINGLE-STAGE FROST PROTECTION THERMOSTAT (FT69)
