Gauge Valves DIN 16270 Type A


AS-Schneider Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16270. The type with 1/2 NPT connection (see below) is not mentioned in DIN 16270. According to DIN 16270 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi) (brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapors.

The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) – PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).

Datasheet
Add to your Quote List

Gauge Valves with Adjusting Nut Instrument Connection

Inlet Outlet Material References Part Number
G 1/2 Male G 1/2 Adjusting Nut Brass DIN 16270 Type A S004.16.000
DVGW approved S004.26.000
Brass (AP)* DIN 16270 Type A S004.16.000.32
1.0460 DIN 16270 Form A S004.16.100
DVGW approved S004.26.100
1.4571 DIN 16270 Type A S004.16.200
DVGW approved S004.26.200
M 20 x 1,5 Male M 20 x 1,5 Adjusting Nut Brass S004.16.050
1.0460 S004.16.150
1.4571 S004.16.250

*Brass (AP) = Body, Adjusting Nut and Union Nut in Brass.

Gauge Valves with 1/2 NPT Female Instrument Connection

Inlet Outlet Material References Part Number
1/2 NPT Male 1/2 NPT Female Brass S004.16.083
1.0460 S004.16.183
1.4571 S004.16.283






Manometerventile DIN 16270 Form A
Manometerventile DIN 16270 Form A 2
Manometerventile DIN 16270 Form A 3
Manometerventile DIN 16270 Form A 4
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Gauge Valves DIN 16270 Type A

    Manometerventile DIN 16270 Form A
    Manometerventile DIN 16270 Form A 2
    Manometerventile DIN 16270 Form A 3
    Manometerventile DIN 16270 Form A 4

    AS-Schneider Gauge Valves are designed for mounting to Pressure Gauges, Pressure Transmitters and Pressure Switches and are manufactured and tested according to DIN 16270. The type with 1/2 NPT connection (see below) is not mentioned in DIN 16270. According to DIN 16270 are the valves applicable for a max. allowable (Working) Pressure (PS) of 250 bar (3,626 psi) (brass) respectively 400 bar (5,801 psi) (carbon steel and stainless steel) and a max. allowable Temperature (TS) of 120°C (248°F) for liquids, gas or vapors.

    The max. allowable Temperature (TS) of 120°C (248°F) is considering the requirement that valves and measuring instruments need to be protected against heating by hot media. This can be achieved by syphons or by instrument impulse lines with sufficient length. However the AS-Schneider valves can be used for temperatures up to 300°C (572°F) – PTFE up to 232°C (450°F), Graphite up to 300°C (572°F).

    Datasheet
    Add to your Quote List

    Gauge Valves with Adjusting Nut Instrument Connection

    Inlet Outlet Material References Part Number
    G 1/2 Male G 1/2 Adjusting Nut Brass DIN 16270 Type A S004.16.000
    DVGW approved S004.26.000
    Brass (AP)* DIN 16270 Type A S004.16.000.32
    1.0460 DIN 16270 Form A S004.16.100
    DVGW approved S004.26.100
    1.4571 DIN 16270 Type A S004.16.200
    DVGW approved S004.26.200
    M 20 x 1,5 Male M 20 x 1,5 Adjusting Nut Brass S004.16.050
    1.0460 S004.16.150
    1.4571 S004.16.250

    *Brass (AP) = Body, Adjusting Nut and Union Nut in Brass.

    Gauge Valves with 1/2 NPT Female Instrument Connection

    Inlet Outlet Material References Part Number
    1/2 NPT Male 1/2 NPT Female Brass S004.16.083
    1.0460 S004.16.183
    1.4571 S004.16.283






    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info