Digital indicator IM3 Frequency 48 x 24 mm


Housing 48 x 24 mm
Display 5-digit
10 mm digit height
Colour: red, green, orange or blue display
Range displayed 0 to 99999
Operation front panel keyboard protection class IP65
Input Frequency
0.01 to 999.99 kHz
3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Alternatively sensor supply
Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
Interface –
Power supply 24 VDC galvanic isolated
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply 10 VDC / 20 mA, incl. digital input
24 VDC / 50 mA, incl. digital input & impulse output, max. 10kHz
Alternatively analog output
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Schmitt-Trigger-input
  • digital frequency filter for contact bounce suppression and interference suppresion
  • frequency filter with varying pulse-duty factor
  • navigation keys for triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarm system with adjustable delay times
  • volume metering (Totalisator) pulse precisely for frequencies up to 1kHz
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • constant setting/setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Datasheet
User Manual
Add to your Quote List

The IM3-7FR5A.0007.S70xD is a 5-digit LED indicator for pulse measuring via incremental encoder, NPN/PNP or Namur sensors and a visual limit value monitoring via the display. The
configuration happens via three front keys or via the optional PC-software PM-TOOL. Optional available are one analog output, one sensor supply, one digital input, one frequency output and two switching points. Several selectable software functions and a direct limit value adjustment in operating mode complete the modern device concept.

Housing 48 x 24 mm
Display 5-digit
10 mm digit height
Colour: red, green, orange or blue display
Range displayed 0 to 99999
Operation front panel keyboard protection class IP65
Input Frequency
0.01 to 999.99 kHz
3-wire PNP/NPN, Namur, incremental encoder, TTL signals
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
Alternatively sensor supply
Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
Interface –
Power supply 24 VDC galvanic isolated
100-240 VAC 50/60 Hz / DC +/- 10%
Sensor supply 10 VDC / 20 mA, incl. digital input
24 VDC / 50 mA, incl. digital input & impulse output, max. 10kHz
Alternatively analog output
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • Schmitt-Trigger-input
  • digital frequency filter for contact bounce suppression and interference suppresion
  • frequency filter with varying pulse-duty factor
  • navigation keys for triggering of Hold, Tara, display change, setpoint setting, alarm actuator
  • flexible alarm system with adjustable delay times
  • volume metering (Totalisator) pulse precisely for frequencies up to 1kHz
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • constant setting/setpoint setting
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code








Digital indicator IM3 Frequency 48 x 24 mm
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Digital indicator IM3 Frequency 48 x 24 mm

    Digital indicator IM3 Frequency 48 x 24 mm
    Housing 48 x 24 mm
    Display 5-digit
    10 mm digit height
    Colour: red, green, orange or blue display
    Range displayed 0 to 99999
    Operation front panel keyboard protection class IP65
    Input Frequency
    0.01 to 999.99 kHz
    3-wire PNP/NPN, Namur, incremental encoder, TTL signals
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Alternatively sensor supply
    Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
    Interface –
    Power supply 24 VDC galvanic isolated
    100-240 VAC 50/60 Hz / DC +/- 10%
    Sensor supply 10 VDC / 20 mA, incl. digital input
    24 VDC / 50 mA, incl. digital input & impulse output, max. 10kHz
    Alternatively analog output
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • Schmitt-Trigger-input
    • digital frequency filter for contact bounce suppression and interference suppresion
    • frequency filter with varying pulse-duty factor
    • navigation keys for triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarm system with adjustable delay times
    • volume metering (Totalisator) pulse precisely for frequencies up to 1kHz
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • constant setting/setpoint setting
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code
    Datasheet
    User Manual
    Add to your Quote List

    The IM3-7FR5A.0007.S70xD is a 5-digit LED indicator for pulse measuring via incremental encoder, NPN/PNP or Namur sensors and a visual limit value monitoring via the display. The
    configuration happens via three front keys or via the optional PC-software PM-TOOL. Optional available are one analog output, one sensor supply, one digital input, one frequency output and two switching points. Several selectable software functions and a direct limit value adjustment in operating mode complete the modern device concept.

    Housing 48 x 24 mm
    Display 5-digit
    10 mm digit height
    Colour: red, green, orange or blue display
    Range displayed 0 to 99999
    Operation front panel keyboard protection class IP65
    Input Frequency
    0.01 to 999.99 kHz
    3-wire PNP/NPN, Namur, incremental encoder, TTL signals
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output 0/4-20 mA / 0-10 VDC / 16 Bit
    Alternatively sensor supply
    Switch point 2 PhotoMos outputs (NOC) 30 VDC/AC, 0.4 A
    Interface –
    Power supply 24 VDC galvanic isolated
    100-240 VAC 50/60 Hz / DC +/- 10%
    Sensor supply 10 VDC / 20 mA, incl. digital input
    24 VDC / 50 mA, incl. digital input & impulse output, max. 10kHz
    Alternatively analog output
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • Schmitt-Trigger-input
    • digital frequency filter for contact bounce suppression and interference suppresion
    • frequency filter with varying pulse-duty factor
    • navigation keys for triggering of Hold, Tara, display change, setpoint setting, alarm actuator
    • flexible alarm system with adjustable delay times
    • volume metering (Totalisator) pulse precisely for frequencies up to 1kHz
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • constant setting/setpoint setting
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code








    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info