DatasheetThe two ram electrodes are pushed firmly into the wood or building material where they measure the moisture content as a percentage based on the dry mass (dry weight).
The hold function freezes the last measurement while the backlit display ensures that the meter can be used in all lighting conditions. A slip-on protective cap and belt bag ensure that the moisture meter is stored safely and a hand strap helps prevent the meter from accidentally being dropped.
Practical – the characteristic curves in the testo 606-1 moisture meter
The testo 606-1 comes complete with a wide range of characteristic curves for wood and building materials. This allows the measured the moisture content to be shown directly as a weight percentage.
Characteristic curves for precise wood moisture measurements:
- Beech
- Spruce
- Larch
- Oak
- Pine
- Maple
Characteristic curves for precise building material measurements:
- Cement screed
- Concrete
- Plaster
- Anhydrite screed
- Cement mortar
- Limestone mortar
- Brickwork
Delivery Scope
| General technical data | |
|---|---|
| Dimensions | 119 x 46 x 25 mm (incl. protective cap) |
| Operating temperature | -10 to +50 °C |
| Protection class | IP20 |
| Battery type | 2 AAA micro batteries |
| Battery life | 200 h (average, without display illumination) |
| Storage temperature | -40 to +70 °C |
| Weight | 90 g (protective cap and batteries included) |
| Wood / Building material moisture | |
|---|---|
| Measuring range | 8.8 to 54.8 % by weight; beech, spruce, larch, birch, cherry, walnut
7.0 to 47.9 % by weight; oak, pine, maple, ash-tree, douglas fir, meranti 0.9 to 22.1 % by weight; cement screed, concrete 0.0 to 11.0 % by weight; anhydrite screed 0.7 to 8.6 % by weight; cement mortar 0.6 to 9.9 % by weight; lime mortar, plaster 0.1 to 16.5 % by weight; bricks |
| Material | ±1 %
0.1 1 s |
