Gauge Cocks with Gland


AS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to above standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 – 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. Originally the AS-Schneider Gauge Cocks were designed for a max. allowable (Working) Pressure (PS) of 25 bar (363 psi) for the G 1/2 models. We kept this pressure class for this kind of gauge cocks, see below Ordering Information.

The Gland Type is a special design and not mentioned in above DIN standards.

Operating Positions are marked on top of the plug (see also further comments under General Information).

Datasheet
Add to your Quote List

*The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.

Gauge Cocks with Gland

 

Inlet Outlet Material PN L H Hex Test Connection References Part Number
G 1/2 Female G 1/2 Female Brass 25 70 65 27 N003.09.000
With Vent N003.09.000.02
G 1/2 Male Test Flange
60 x 25 x 10		 Brass Test Flange 60 x 25 x 10 N003.09.070.01
G 1/2 Female Brass 77 N003.10.000
With Vent N003.10.000.02

 







Manometerhähne mit Stopfbuchse 1
Manometerhähne mit Stopfbuchse 2
Manometerhähne mit Stopfbuchse 3
Manometerhähne mit Stopfbuchse 4
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Gauge Cocks with Gland

    Manometerhähne mit Stopfbuchse 1
    Manometerhähne mit Stopfbuchse 2
    Manometerhähne mit Stopfbuchse 3
    Manometerhähne mit Stopfbuchse 4

    AS-Schneider Gauge Cocks are basically designed, manufactured and tested according to DIN 16261, DIN 16262 and DIN 16263. According to above standards the cocks are applicable for a max. allowable (Working) Pressure (PS) of 6 – 16 bar (87 – 232 psi) and a max. allowable Temperature (TS) of 50°C (122°F) for liquids, gas or vapors. Originally the AS-Schneider Gauge Cocks were designed for a max. allowable (Working) Pressure (PS) of 25 bar (363 psi) for the G 1/2 models. We kept this pressure class for this kind of gauge cocks, see below Ordering Information.

    The Gland Type is a special design and not mentioned in above DIN standards.

    Operating Positions are marked on top of the plug (see also further comments under General Information).

    Datasheet
    Add to your Quote List

    *The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.

    Gauge Cocks with Gland

     

    Inlet Outlet Material PN L H Hex Test Connection References Part Number
    G 1/2 Female G 1/2 Female Brass 25 70 65 27 N003.09.000
    With Vent N003.09.000.02
    G 1/2 Male Test Flange
    60 x 25 x 10    		 Brass Test Flange 60 x 25 x 10 N003.09.070.01
    G 1/2 Female Brass 77 N003.10.000
    With Vent N003.10.000.02

     







    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info