In-Rail-Bus Power Terminal – for installations with In-Rail-Bus system


Power terminal for installations with In-Rail-Bus system

The 6.2 mm wide Power Terminal DZU 1402 are used for supplying the In-Rail-Bus DIN rail connector with supply voltage up to 32 V DC.

The Power Terminal DZU1402 with two separate and reverse polarity protected voltage inputs allow a redundant voltage supply and a maximum current of 3 A. The status of the power supply of both voltage inputs will be displayed each by a LED on front. A green LED lights up when there is supply voltage on the voltage input. A red LED indicates reversed polarity.

Ex- und UL-Anweisungen
Add to your Quote List

Product line

Accessories Order No.
Power terminal device for In-Rail-Bus, redundant DZU 1402

 

Technical Data

Supply voltage ≤ 32 V DC
Input current ≤ 3 A
Recommended fuse 3.15 A Slow-blow
Drop voltage ≤ 0.5 V
Operating and fault indication LED green / red
Feeding 2 redundant inputs, decoupled via diodes
Approvals UL (USA/Canada): UL 61010, Class I, Div. 2
ATEX / IECEx: Zone 2 (nA)
Connection Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Construction 6.2 x 96 x 107 mm

Dimensions

Terminal assignments

  • 1–
  • 2–
  • 5Modbus A
  • 6Modbus B
  • 3 +Supply 2
  • 4 −Supply 2
  • 7 +Supply 1
  • 8 −Supply 1

Datasheets








In-Rail-Bus Power Terminal - for installations with In-Rail-Bus system
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    In-Rail-Bus Power Terminal – for installations with In-Rail-Bus system

    In-Rail-Bus Power Terminal - for installations with In-Rail-Bus system

    Power terminal for installations with In-Rail-Bus system

    The 6.2 mm wide Power Terminal DZU 1402 are used for supplying the In-Rail-Bus DIN rail connector with supply voltage up to 32 V DC.

    The Power Terminal DZU1402 with two separate and reverse polarity protected voltage inputs allow a redundant voltage supply and a maximum current of 3 A. The status of the power supply of both voltage inputs will be displayed each by a LED on front. A green LED lights up when there is supply voltage on the voltage input. A red LED indicates reversed polarity.

    Ex- und UL-Anweisungen
    Add to your Quote List

    Product line

    Accessories Order No.
    Power terminal device for In-Rail-Bus, redundant DZU 1402

     

    Technical Data

    Supply voltage ≤ 32 V DC
    Input current ≤ 3 A
    Recommended fuse 3.15 A Slow-blow
    Drop voltage ≤ 0.5 V
    Operating and fault indication LED green / red
    Feeding 2 redundant inputs, decoupled via diodes
    Approvals UL (USA/Canada): UL 61010, Class I, Div. 2
    ATEX / IECEx: Zone 2 (nA)
    Connection Captive plus-minus clamp screws
    Wire cross-section max. 2.5 mm² / AWG 14
    Stripped length 6 to 8 mm / 0.28 in
    Screw terminal torque 0.8 Nm / 7 lbf in
    Construction 6.2 x 96 x 107 mm

    Dimensions

    Terminal assignments

    • 1–
    • 2–
    • 5Modbus A
    • 6Modbus B
    • 3 +Supply 2
    • 4 −Supply 2
    • 7 +Supply 1
    • 8 −Supply 1

    Datasheets








    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info