In-Rail-Bus Power Terminal – for installations with In-Rail-Bus system

Power terminal for installations with In-Rail-Bus system

The 6.2 mm wide Power Terminal DZU 1402 are used for supplying the In-Rail-Bus DIN rail connector with supply voltage up to 32 V DC.

The Power Terminal DZU1402 with two separate and reverse polarity protected voltage inputs allow a redundant voltage supply and a maximum current of 3 A. The status of the power supply of both voltage inputs will be displayed each by a LED on front. A green LED lights up when there is supply voltage on the voltage input. A red LED indicates reversed polarity.

Ex- und UL-Anweisungen

Ex- und UL-Anweisungen

Product line

Accessories	Order No.
Power terminal device for In-Rail-Bus, redundant	DZU 1402

Technical Data

Supply voltage	≤ 32 V DC
Input current	≤ 3 A
Recommended fuse	3.15 A Slow-blow
Drop voltage	≤ 0.5 V
Operating and fault indication	LED green / red
Feeding	2 redundant inputs, decoupled via diodes
Approvals	UL (USA/Canada): UL 61010, Class I, Div. 2 ATEX / IECEx: Zone 2 (nA)
Connection	Captive plus-minus clamp screws Wire cross-section max. 2.5 mm² / AWG 14 Stripped length 6 to 8 mm / 0.28 in Screw terminal torque 0.8 Nm / 7 lbf in
Construction	6.2 x 96 x 107 mm