Straight Pipes and 90° Elbows


AS-Schneider Staright Pipes and 90° Elbows are used when gauge syphons are not necessary due to the service conditions. The Straight Pipe is used for vertical installations. The 90° Elbow is used for horizontal installations.

The standard pipe dimension is Ø 20 x 2.6 mm. 1/2″ pipe (Ø 21.3 mm) dimensions are also available.

Max. allowable (Working) Pressure (PS) please see below Pressure / Temperature Rating which is based on the standard pipe dimension.

Datasheet
Add to your Quote List

*The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.

Straight Pipes

Inlet Outlet Material Part Number
Butt Weld End
Ø 20 x 2.6		 G 1/2 Adjusting Nut 1.0345 S006.17.101.02
1.4571 S006.17.201.02
1/2 NPT Female 1.0345 S006.17.101.28
1.4571 S006.17.201.28

BI

90° Elbows

Inlet Outlet Material Part Number
Butt Weld End
Ø 20 x 2.6		 G 1/2 Adjusting Nut 1.0345 S006.17.100.02
1.0345 S006.17.102.15
1.4571 S006.17.200.02
1.4571 S006.17.202.15






Gerade Rohrstücke und 90° Rohrbögen 1
Gerade Rohrstücke und 90° Rohrbögen 2
Gerade Rohrstücke und 90° Rohrbögen 3
Gerade Rohrstücke und 90° Rohrbögen 4
Gerade Rohrstücke und 90° Rohrbögen 5
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Straight Pipes and 90° Elbows

    Gerade Rohrstücke und 90° Rohrbögen 1
    Gerade Rohrstücke und 90° Rohrbögen 2
    Gerade Rohrstücke und 90° Rohrbögen 3
    Gerade Rohrstücke und 90° Rohrbögen 4
    Gerade Rohrstücke und 90° Rohrbögen 5

    AS-Schneider Staright Pipes and 90° Elbows are used when gauge syphons are not necessary due to the service conditions. The Straight Pipe is used for vertical installations. The 90° Elbow is used for horizontal installations.

    The standard pipe dimension is Ø 20 x 2.6 mm. 1/2″ pipe (Ø 21.3 mm) dimensions are also available.

    Max. allowable (Working) Pressure (PS) please see below Pressure / Temperature Rating which is based on the standard pipe dimension.

    Datasheet
    Add to your Quote List

    *The dimensions shown in this catalogue apply to standard types. If you need the dimensions for your individual type or should you still not find your options at all please contact the factory.

    Straight Pipes

    Inlet Outlet Material Part Number
    Butt Weld End
    Ø 20 x 2.6    		 G 1/2 Adjusting Nut 1.0345 S006.17.101.02
    1.4571 S006.17.201.02
    1/2 NPT Female 1.0345 S006.17.101.28
    1.4571 S006.17.201.28

    BI

    90° Elbows

    Inlet Outlet Material Part Number
    Butt Weld End
    Ø 20 x 2.6    		 G 1/2 Adjusting Nut 1.0345 S006.17.100.02
    1.0345 S006.17.102.15
    1.4571 S006.17.200.02
    1.4571 S006.17.202.15






    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info