- Measurement principle: bending beam
- Output signal 4 … 20 mA
- Electrical connection: 5-pin device connector, M16 x 0.75
- Protection class (EN 60529 / IEC 529) IP 65
- Housing material: steel
- Signal type: three-wire
- Supply voltage Ub 10 … 24 VDC
- Current consumption max. 40 mA
- Error limit < 0.5 % of full scale
- Temperature error nominal point < ± 0.04 % of full scale / K
- Temperature error output signal < ± 0.04 % of measuring range / K
- Non-linearity < ± 0.15 % of full scale
- Hysteresis max. 0.1 % of full scale
- Calibration in N
- Calibration tolerance < 0.25 % of full scale
- Ambient temperature -15 … +85 °C
- Storage temperature -15 … +85 °C
HySense FO110 – Force Sensor Based on the Bending Beam Principle
- Measurement principle: bending beam
- Output signal 4 … 20 mA
 Data sheet
|
- Measurement principle: bending beam
- Output signal 4 … 20 mA
- Electrical connection: 5-pin device connector, M16 x 0.75
- Protection class (EN 60529 / IEC 529) IP 65
- Housing material: steel
- Signal type: three-wire
- Supply voltage Ub 10 … 24 VDC
- Current consumption max. 40 mA
- Error limit < 0.5 % of full scale
- Temperature error nominal point < ± 0.04 % of full scale / K
- Temperature error output signal < ± 0.04 % of measuring range / K
- Non-linearity < ± 0.15 % of full scale
- Hysteresis max. 0.1 % of full scale
- Calibration in N
- Calibration tolerance < 0.25 % of full scale
- Ambient temperature -15 … +85 °C
- Storage temperature -15 … +85 °C
Technical advice: 03303 / 50 40 66
Technical advice for this product
Related Products
Dynarope HF36 – Tension meter for high capacities
Dynarope HF37 – Compact, lightweight and handy device for low capacities
Dynasafe Mecha
Handifor digital weigher
Dynafor™ Pro
Dynafor Expert
Dynafor Industrial
Tractive force indicator dynarope
HySense FO310 – Force Sensors Based on the Compression Force Principle
HySense FO210 – Force sensor
FH-EXT – Force-measurement device with external, high-resolution measuring cell for small loads
