ISP100-P – Pressure Comparison Test Pump, Pneumatic, -0,95 to +100 bar


Pressure range [bar] to+100 bar, switchable to vacuum to -0.95 bar
Medium   ambient air
Pressure ports   2 x 1/2″ BSP female rotating swivel nut (2 adapters to M20x1.5 female are included in delivery)
Pressure fine adjustment   Fine adjustment valve, sensitivity ±0.1 mbar
Dimension [mm] 450 x 262 x 170
Weight [kg] 5,6
Design   Manual lever pump with fine adjustment and pressure/vacuum-switch
Order-Code   ISP-100-P
Datasheet
Add to your Quote List

The Pressure comparison test pump ISP 100-P is used for generating pressure and vacuum for the testing, adjusting and calibration of mechanical and electronict pressure measuring instruments by means of comparison measurements. These pressure and vacuum tests can be carried out in laboratories, workshops or on site at the set measuring point.
When the device under test and a reference measuring instrument with an adequate accuracy are connected to the same pressure comparator, the same pressure will act on both measuring instruments after actuating the pump. A calibration or adjustment can be carried out by comparing the two measure values at any pressure or vacuum value.









ISP100-P - Pressure Comparison Test Pump, Pneumatic, -0,95 to +100 bar
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    ISP100-P – Pressure Comparison Test Pump, Pneumatic, -0,95 to +100 bar

    ISP100-P - Pressure Comparison Test Pump, Pneumatic, -0,95 to +100 bar
    Pressure range [bar] to+100 bar, switchable to vacuum to -0.95 bar
    Medium   ambient air
    Pressure ports   2 x 1/2″ BSP female rotating swivel nut (2 adapters to M20x1.5 female are included in delivery)
    Pressure fine adjustment   Fine adjustment valve, sensitivity ±0.1 mbar
    Dimension [mm] 450 x 262 x 170
    Weight [kg] 5,6
    Design   Manual lever pump with fine adjustment and pressure/vacuum-switch
    Order-Code   ISP-100-P
    Datasheet
    Add to your Quote List

    The Pressure comparison test pump ISP 100-P is used for generating pressure and vacuum for the testing, adjusting and calibration of mechanical and electronict pressure measuring instruments by means of comparison measurements. These pressure and vacuum tests can be carried out in laboratories, workshops or on site at the set measuring point.
    When the device under test and a reference measuring instrument with an adequate accuracy are connected to the same pressure comparator, the same pressure will act on both measuring instruments after actuating the pump. A calibration or adjustment can be carried out by comparing the two measure values at any pressure or vacuum value.









    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info