Nemo 96HD+ – Network monitor for low, medium and high voltage (with limits indicated for CT and VT ratio) 96x96mm


Network monitor for l.v./m.v. application with active energy count and harmonic analysis up to the 50th

AUX 11…60 Vdc
OUTPUT for 4 plug-in optional modules
FORMAT 96×96 mm
CURRENT 1 and 5 A
VOLTAGE 80…690 V (phase-phase)
VOLTAGE OPTIONS direct or from VT (programmable ratio)
CURRENT OPTIONS from CT (programmable ratio)
TYPE Network monitor for l.v./m.v. application with active energy count and harmonic analysis up to the 50th
MAIN single-phase or three-phase 3/4 wire unbalanced load
DISPLAY LCD rear-lighted
Datasheet
User Manual
Add to your Quote List
  • Panel mounting 96×96 mm
  • Electrical measurement in low-voltage networks (Nemo 96HD) and in low-, medium- and high-voltage networks (Nemo 96HD+)
  • Measurements: I, neutral current, U, Hz, P, Q, S, P/Q/Smax, PF, kWh (Class 0.5s), kvarh (Class 2), THD I, THD U
  • Operating hours
  • Optional plug-in expansion modules: RS485 communication, RS232, JBUS/MODBUS, PROFIBUS, LONWORKS, M-BUS, BACNET, ETHERNET, 2 analog outputs, 2 pulse outputs (kWh and kvarh), 2 alarm contacts, neutral current, I/O – 2 SPST inputs / 2 outputs, I/O – 2 inputs 12–24 VDC / 2 outputs, RS485 – memory – temperature
MODEL Nemo 96HD+
LINE Single-phase
CONNECTION Single-phase ✔
Three-phase, balanced load ✔
Three-phase, unbalanced load ✔
DIAGNOSTICS, PHASE SEQUENCE CORRECTION Voltage (phase–phase) 400V
RATED VALUE Current 1 and 5A
CURRENT INPUT Insulated ✔
VT (kVT) 1…1500
PROGRAMMABLE RATIO CT/VT
Ranges Ipn / Isn
max. kVT × kCT 2,000,000 (5A)
10,000,000 (1A)
ACTIVE ENERGY Shunt
Accuracy EN/IEC 61557-12 cl.0.5
Positive, total and partial ✔
Negative, total and partial ✔
REACTIVE ENERGY Accuracy EN/IEC 61557-12 cl.2
Positive, total and partial ✔
Negative, total and partial ✔
VOLTAGE Phase to neutral (calculated) ✔
Neutral (measured) IF9606
CURRENT Phase average and maximum values ✔
POWER FACTOR Three-phase ✔
POWER Phase average and maximum values ✔
HARMONIC DISTORTION THD ✔
FREQUENCY ✔
OPERATING HOURS COUNTER ✔
WRONG PHASE SEQUENCE ✔
TEMPERATURE IF9601
PULSES IF9603
ALARMS IF9604 + IF9605
ANALOG IF9604
RS232 IF9603
RS485 MODBUS RTU IF9612
RS485 + MEMORY IF9607A
PROFIBUS IF9606A
LONWORKS IF9607B
MBUS IF9608
ETHERNET IF9615
RADIO TRANSMISSION 868 MHz IF9618

 

OPTIONAL MODULES

Up to four optional modules can be installed in the meter. Communication modules are alternatives to one another (they cannot be installed simultaneously). For the options “pulse outputs”, “analog output”, and “alarms”, one or two modules can be installed. The table shows module composition limitations: maximum number of modules and installation position.

Code Description Max. number Position Firmware Technical note
A B C D
IF9601 RS485 communication 1 • • All NT675
IF9602 RS232 communication 1 • • All NT676
IF9603 2 energy pulse outputs 2 • • All NT677
IF9604 2 analog outputs 0/4…20 mA 2 • • 1.08 NT678
IF9605 2 alarms 2 • • All NT679
IF9606 Neutral current 1 • • 1.08 NT683
IF9607A PROFIBUS communication 1 • • 3.12 NT682
IF9609 LONWORKS communication 1 • • 2.00 NT684
IF9610 I/O: 2 SPST inputs – 2 SPST outputs 1 • • 2.06 NT702
IF9611 I/O: 2 inputs 12–24 VDC – 2 SPST outputs 2 • • 2.06 NT703
IF9612 Energy storage – RS485 2 • • 2.06 NT704
IF9613 MBUS communication 1 • • 2.06 NT707
IF9614 BACnet communication 1 • • 2.08 NT743
IF9615 Ethernet communication 1 • • 2.00 NT785
IF9616 Temperature measurement 1 • • 2.30 NT810
IF9618 Wireless communication 1 • • 2.33 NT856




Nemo 96HD+ - Multifunktionsbaustein, Schalttafeleinbau 96x96mm
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Nemo 96HD+ – Network monitor for low, medium and high voltage (with limits indicated for CT and VT ratio) 96x96mm

    Nemo 96HD+ - Multifunktionsbaustein, Schalttafeleinbau 96x96mm

    Network monitor for l.v./m.v. application with active energy count and harmonic analysis up to the 50th

    AUX 11…60 Vdc
    OUTPUT for 4 plug-in optional modules
    FORMAT 96×96 mm
    CURRENT 1 and 5 A
    VOLTAGE 80…690 V (phase-phase)
    VOLTAGE OPTIONS direct or from VT (programmable ratio)
    CURRENT OPTIONS from CT (programmable ratio)
    TYPE Network monitor for l.v./m.v. application with active energy count and harmonic analysis up to the 50th
    MAIN single-phase or three-phase 3/4 wire unbalanced load
    DISPLAY LCD rear-lighted
    Datasheet
    User Manual
    Add to your Quote List
    • Panel mounting 96×96 mm
    • Electrical measurement in low-voltage networks (Nemo 96HD) and in low-, medium- and high-voltage networks (Nemo 96HD+)
    • Measurements: I, neutral current, U, Hz, P, Q, S, P/Q/Smax, PF, kWh (Class 0.5s), kvarh (Class 2), THD I, THD U
    • Operating hours
    • Optional plug-in expansion modules: RS485 communication, RS232, JBUS/MODBUS, PROFIBUS, LONWORKS, M-BUS, BACNET, ETHERNET, 2 analog outputs, 2 pulse outputs (kWh and kvarh), 2 alarm contacts, neutral current, I/O – 2 SPST inputs / 2 outputs, I/O – 2 inputs 12–24 VDC / 2 outputs, RS485 – memory – temperature
    MODEL Nemo 96HD+
    LINE Single-phase
    CONNECTION Single-phase ✔
    Three-phase, balanced load ✔
    Three-phase, unbalanced load ✔
    DIAGNOSTICS, PHASE SEQUENCE CORRECTION Voltage (phase–phase) 400V
    RATED VALUE Current 1 and 5A
    CURRENT INPUT Insulated ✔
    VT (kVT) 1…1500
    PROGRAMMABLE RATIO CT/VT
    Ranges Ipn / Isn
    max. kVT × kCT 2,000,000 (5A)
    10,000,000 (1A)
    ACTIVE ENERGY Shunt
    Accuracy EN/IEC 61557-12 cl.0.5
    Positive, total and partial ✔
    Negative, total and partial ✔
    REACTIVE ENERGY Accuracy EN/IEC 61557-12 cl.2
    Positive, total and partial ✔
    Negative, total and partial ✔
    VOLTAGE Phase to neutral (calculated) ✔
    Neutral (measured) IF9606
    CURRENT Phase average and maximum values ✔
    POWER FACTOR Three-phase ✔
    POWER Phase average and maximum values ✔
    HARMONIC DISTORTION THD ✔
    FREQUENCY ✔
    OPERATING HOURS COUNTER ✔
    WRONG PHASE SEQUENCE ✔
    TEMPERATURE IF9601
    PULSES IF9603
    ALARMS IF9604 + IF9605
    ANALOG IF9604
    RS232 IF9603
    RS485 MODBUS RTU IF9612
    RS485 + MEMORY IF9607A
    PROFIBUS IF9606A
    LONWORKS IF9607B
    MBUS IF9608
    ETHERNET IF9615
    RADIO TRANSMISSION 868 MHz IF9618

     

    OPTIONAL MODULES

    Up to four optional modules can be installed in the meter. Communication modules are alternatives to one another (they cannot be installed simultaneously). For the options “pulse outputs”, “analog output”, and “alarms”, one or two modules can be installed. The table shows module composition limitations: maximum number of modules and installation position.

    Code Description Max. number Position Firmware Technical note
    A B C D
    IF9601 RS485 communication 1 • • All NT675
    IF9602 RS232 communication 1 • • All NT676
    IF9603 2 energy pulse outputs 2 • • All NT677
    IF9604 2 analog outputs 0/4…20 mA 2 • • 1.08 NT678
    IF9605 2 alarms 2 • • All NT679
    IF9606 Neutral current 1 • • 1.08 NT683
    IF9607A PROFIBUS communication 1 • • 3.12 NT682
    IF9609 LONWORKS communication 1 • • 2.00 NT684
    IF9610 I/O: 2 SPST inputs – 2 SPST outputs 1 • • 2.06 NT702
    IF9611 I/O: 2 inputs 12–24 VDC – 2 SPST outputs 2 • • 2.06 NT703
    IF9612 Energy storage – RS485 2 • • 2.06 NT704
    IF9613 MBUS communication 1 • • 2.06 NT707
    IF9614 BACnet communication 1 • • 2.08 NT743
    IF9615 Ethernet communication 1 • • 2.00 NT785
    IF9616 Temperature measurement 1 • • 2.30 NT810
    IF9618 Wireless communication 1 • • 2.33 NT856




    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info