Digital indicator IM2 melt pressure strain gauges 96 x 48 mm


Housing 96 x 48 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V
with 80% calibration
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output –
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface –
Power supply 230 VAC
10-30 VDC galvanic isolated
Other voltage supplies on demand!
Sensor supply Feeding 10 VDC / 20-40 mA / 250-500 Ohm
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero-key for triggering of Hold, Tara or setpoint setting
  • standard digital input for triggering of Hold, Tara or setpoint setting
  • flexible alarm system with adjustable delay times
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code
Datasheet
User Manual
Add to your Quote List

The IM2-1MR5B.020X.570xD is a 5-digit meter for power/weight measuring via strain gauges with a switching contact of 80% alignment and a visual limit value monitoring via the display. The configuration happens via 4 front keys or via the optional PC-software PM-TOOL. For a further evaluation, two switching points are optionally available. Many selectable software functions, the direct limit value adjustment in operating mode and the compact installation depth of 89 mm create a solid device concept.

Housing 96 x 48 mm
Display 5-digit
14 mm digit height
Colour: red, green, orange or blue display
Range displayed -19999 to 99999
Operation front panel keyboard protection class IP65
Input DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V
with 80% calibration
Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output –
Switch point 2 relays (change-over contact)
250 V / 5 AAC, 30 V / 5 ADC
Interface –
Power supply 230 VAC
10-30 VDC galvanic isolated
Other voltage supplies on demand!
Sensor supply Feeding 10 VDC / 20-40 mA / 250-500 Ohm
Software properties
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero-key for triggering of Hold, Tara or setpoint setting
  • standard digital input for triggering of Hold, Tara or setpoint setting
  • flexible alarm system with adjustable delay times
  • mathematical functions like reciprocal value, square root, squaring and rounding
  • sliding averaging
  • brightness control via parameter or front keys
  • programming interlock via access code

 









IM2 - 5-stelliges digitales Einbauinstrument in 96x48 mm (BxH). DMS-Verstärker mit 80% Kalibrierung für 350 Ω Massedrucksensoren
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    Digital indicator IM2 melt pressure strain gauges 96 x 48 mm

    IM2 - 5-stelliges digitales Einbauinstrument in 96x48 mm (BxH). DMS-Verstärker mit 80% Kalibrierung für 350 Ω Massedrucksensoren
    Housing 96 x 48 mm
    Display 5-digit
    14 mm digit height
    Colour: red, green, orange or blue display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V
    with 80% calibration
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output –
    Switch point 2 relays (change-over contact)
    250 V / 5 AAC, 30 V / 5 ADC
    Interface –
    Power supply 230 VAC
    10-30 VDC galvanic isolated
    Other voltage supplies on demand!
    Sensor supply Feeding 10 VDC / 20-40 mA / 250-500 Ohm
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • zero-key for triggering of Hold, Tara or setpoint setting
    • standard digital input for triggering of Hold, Tara or setpoint setting
    • flexible alarm system with adjustable delay times
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code
    Datasheet
    User Manual
    Add to your Quote List

    The IM2-1MR5B.020X.570xD is a 5-digit meter for power/weight measuring via strain gauges with a switching contact of 80% alignment and a visual limit value monitoring via the display. The configuration happens via 4 front keys or via the optional PC-software PM-TOOL. For a further evaluation, two switching points are optionally available. Many selectable software functions, the direct limit value adjustment in operating mode and the compact installation depth of 89 mm create a solid device concept.

    Housing 96 x 48 mm
    Display 5-digit
    14 mm digit height
    Colour: red, green, orange or blue display
    Range displayed -19999 to 99999
    Operation front panel keyboard protection class IP65
    Input DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V
    with 80% calibration
    Digital input: <2.4V OFF, >10V ON, max. 30 VDC
    Analogue Output –
    Switch point 2 relays (change-over contact)
    250 V / 5 AAC, 30 V / 5 ADC
    Interface –
    Power supply 230 VAC
    10-30 VDC galvanic isolated
    Other voltage supplies on demand!
    Sensor supply Feeding 10 VDC / 20-40 mA / 250-500 Ohm
    Software properties
    • min/max-memory with adjustable permanent display
    • 30 additional adjustable supporting points
    • display flashing at threshold value exceedance/undercut
    • zero-key for triggering of Hold, Tara or setpoint setting
    • standard digital input for triggering of Hold, Tara or setpoint setting
    • flexible alarm system with adjustable delay times
    • mathematical functions like reciprocal value, square root, squaring and rounding
    • sliding averaging
    • brightness control via parameter or front keys
    • programming interlock via access code

     









    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info