HySense QL 200 – Turbine volume flow sensor with load valve

No longer available. This product is no longer offered.
Recommended alternative: QL 2xx HySense® High precision turbine flow meter with controllable load valve

  • Measuring principle volume flow
  • Viscosity range 1 … 100 mm²/s (cSt)
  • Medium temperature max. +120 °C
  • Environmental temperature -20 … +85 °C (short-term up to +100 °C)
  • Storage temperature -20 … +85 °C
  • Output signal frequency (rectangular signal)
  • Supply voltage Ub 6.5 … 30 VDC
  • Error limit ± 2.5 % of current value
  • Electrical measuring connector 5 pole device connector, M16 x 0.75
  • Mechanical measuring connector ISO228-G1¼
  • Protection type (EN 60529 / IEC 529) IP 40
  • Tightening torque (sensor) 10 Nm (± 2 Nm)
  • Calibration viscosity 30 mm²/s (cSt)
  • Material turbine casing Aluminium (3.4365)
  • Material turbine wheel 1.0718
  • Material sealings FKM
  • Material sensor casing 3.1645
  • Suitable measuring cable MK 01
Datasheet
Add to your Quote List






QL200 HySense - Turbinen Volumenstromsensor mit Belastungsventil
Technical advice: 03303 / 50 40 66

Technical advice for this product


    In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



    HySense QL 200 – Turbine volume flow sensor with load valve

    No longer available. This product is no longer offered.
    Recommended alternative: QL 2xx HySense® High precision turbine flow meter with controllable load valve
    QL200 HySense - Turbinen Volumenstromsensor mit Belastungsventil
    • Measuring principle volume flow
    • Viscosity range 1 … 100 mm²/s (cSt)
    • Medium temperature max. +120 °C
    • Environmental temperature -20 … +85 °C (short-term up to +100 °C)
    • Storage temperature -20 … +85 °C
    • Output signal frequency (rectangular signal)
    • Supply voltage Ub 6.5 … 30 VDC
    • Error limit ± 2.5 % of current value
    • Electrical measuring connector 5 pole device connector, M16 x 0.75
    • Mechanical measuring connector ISO228-G1¼
    • Protection type (EN 60529 / IEC 529) IP 40
    • Tightening torque (sensor) 10 Nm (± 2 Nm)
    • Calibration viscosity 30 mm²/s (cSt)
    • Material turbine casing Aluminium (3.4365)
    • Material turbine wheel 1.0718
    • Material sealings FKM
    • Material sensor casing 3.1645
    • Suitable measuring cable MK 01
    Datasheet
    Add to your Quote List






    Technical advice: 03303 / 50 40 66

    Technical advice for this product


      In accordance with the General Data Protection Regulation (GDPR), we are obliged to inform you about the collection of data. We meet this obligation by referring to our privacy notice.



      Diese Website benutzt Cookies. Wenn du die Website weiter nutzt, gehen wir von deinem Einverständnis aus.
      More info