Description
The IP20 pressure transmitter model is designed for use in applications where media tend to deposit and clog the sensor. A compact front-flush process connection prevents hidden edges and drill holes, in combination with a resistant ceramic sensor, optimal cleaning and maintenance can be ensured. The capacitive measuring principle enables a very accurate and long-term stable measurement, even at lowest pressures and high overload resistance. The process connection is made of high-quality stainless steel 1.4404 and is therefore suitable for almost all media. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet.
Applications:
|
Technical data:
Measuring ranges | Smallest measuring range: 0…60 mbar |
Largest measuring range: 0…20 bar | |
Negative pressure measuring range: up to -1 bar | |
Analog output | 4…20 mA, 2-wires |
Power supply | 9…30 V DC |
Accuracy | ≤ ± 0,3 % FS @ 25 °C |
≤ ± 0,5 % FS @ 25°C < 0…100 mbar | |
Long term stability | ≤ ± 0,3 % FS / Year |
Response time | 200 ms – others on request |
Swich-on time | < 1 s |
Temperature coefficient | Zero: ≤ ± 0,02 % FS / Kelvin |
Span: ≤ ± 0,01 % FS / Kelvin | |
Medium temperature | -25…100 °C |
-25 …125 °C high temperature version | |
Surrounding temperature | -25…80 °C |
-25 …85 °C high temperature version | |
Storage temperature | -40…85 °C |
Short-circuit resistance | Permanent |
Reverse polarity protection | Protection against reverse polarity, but no function |
Electromagnetic compatibility | Interference emissions and immunity acc. to EN 61326 |
Wetted materials | Process connection: Stainless steel 1.4404 |
Sensor: Ceramic Al2O3 | |
Sensor seal: FPM (Viton), NBR, EPDM | |
Protection type | IP 67 |
Weight | Approx. 150 g |