- High-quality machining guarantees smooth operation with low torque and low wear
- Leak-tested tightness in accordance with BS6755 / ISO 5208 leakage rate A
- Large selection of materials and configurations available
- Customer-specific combination of valves and instruments (hook-up) on request
 Datasheet |
![WIKA Model HPAC High-pressure connection adapters and couplings Nominal pressure of 15,000 ... 60,000 psi [1,034 ... 4,136 bar]](https://www.ics-schneider.de/wp-content/uploads/2023/02/fitting-1-350x350.jpg?x70462)
- One-piece design
- Laser marked for identification
- Large selection of materials and configurations available
- Customer-specific combination of adapters, fittings, valves and measuring instruments (instrument hook-up) on request
| Datasheet |
- Low-wear design due to non-rotating spindle tip in the bonnet
- Low torque and smooth operation of valve handle even at high pressure
- Enhanced safety due to blow-out proof bonnet design
- Customer-specific combination of valves and instruments (hook-up) on request
- Standardised centre distances of 37 mm and 54 mm, suitable for WIKA differential pressure gauges and commonly used process transmitters
| Datasheet |
| User Manual |
- Form A with swivelling nut to DIN 16283
- Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket
- Connection: G 1/2 or M20 x 1,5
- Material : Brass, Steel, CrNi-Steel
- PN in bar : 250, 400
- Temperaturbereich: -20...+200°C
 Datasheet
|
- Form A with swivelling nut to DIN 16283
- Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket
- Connection: G 1/2 or M20 x 1,5
- Material : Brass, Steel, CrNi-Steel
- PN in bar : 250, 400
- Temperature range: -20...+200°C
|
Datasheet
|
- Form A with swivelling nut to DIN 16 283
- Form B union with tall nipple per DIN 16284 and shaft to fit surface mounting bracket
- Connection: G 1/2 or M20 x 1,5
- Material : Brass, Steel, CrNi steel
- PN in bar : 250, 400
- Temperature range: -20...+200°C
|
Datasheet
|
- Bar stock body, machined
- Direct or remote mounting
- Needle tip free rotating cone
- Material stainless steel 316
- Metric Range Max: 400 bar
- Imperial Range Max: 6.000 psi
|
Datasheet
|
- Bar stock body, machined
- Direct or remote mounting
- Needle tip free rotating cone
- Material stainless steel 316
- Metric Range Max: 420 bar
- Imperial Range Max: 6.000 psi
|
Datasheet
|
- Bar stock body, machined
- Direct mounting, optional separate surface mounting brackets
- Needle tip free rotating cone
- Material stainless steel 316
- Metric Range Max: 420 bar
- Imperial Range Max: 6.000 psi
|
Datasheet
|
- Sleeve: G 1/2, G 1/4
- Male thread: G 1/2, G 1/4
- PN in bar : 16, 25
- Material: Brass
- DIN : 16 260, 16 262
|
Datasheet
|
- Bar stock body, machined
- Direct mounting, optional separate surface mounting brackets
- Needle tip free rotating cone
- Material stainless steel 316
- Metric Range Max: 420 bar
- Imperial Range Max: 6.000 psi
|
Datasheet
|
