The Potentiometer Transmitter DR 4310 is used for isolation and conversion of potentiometer position signals.
- Easy configuration Conversion of potentiometric position signals without range selection
- Universal power supply for 20 to 253 V AC/DC Applicable world-wide for all common supply voltages
- 3-port isolation Protection against erroneous measurements due to parasitic voltages or ground loops
- Ultra small sized housing 12.5 mm housing with plug-in screw terminal blocks
- High bandwidth; high accuracy No distortion; no falsification of measured signal
- Protective Separation Protects service personnel and downstream devices against impermissibly high voltage
- Maximum reliability No maintenance costs
- 5 Years Warranty Defects occurring within 5 years from delivery date shall be remedied free of charge at our plant (carriage and insurance paid by sender)
 Datasheet |
- red display of -199…999 Digits
- digit height approx. 7mm
- min/max value recording
- 9 adjustable supporting points
- display flashing at threshold value exceedance / threshold value undercut
- Tara function
- programming interlock via access code
- pluggable screw-terminal
- optional: analog output 0-10 VDC, 0/4-20 mA switchable
- optional: interfaces RS232 / RS485 / Bluetooth
- optional: sensor supply incl. digital input
- optional: 2 relay outputs / 2 PhotoMos-outputs / 2 relay outputs & 2 PhotoMos-outputs
- optional: Bluetooth interface
- optional: data logger
- accessories: PC-based configuration kit PM-TOOL with CD & USB adapter
| Datasheet |
| User Manual |
- Type IMH-DRADLM-08000C-10 (Standard)
- input sensitivity 0.1 to 5 mV/V
- sensor supply: 5 VDC
- digital input: tara function external via terminal
- resolution: 12 / 14 / 15 / 16 Bit
- total error: 0.3% of final value
- housing material: plastics PA66 GF30 for top hat rail
- protection class: IP20
| Datasheet |
