DatasheetThree-Phase Current Relay – Wall Mounting
Current relay for three-phase networks
| Type | Current relay for three-phase networks with 2 alarms |
|---|---|
| Mounting type | Wall mounting |
| Alarm functions | 2 alarms, 1 × max. + 1 × min. or max., selectable in the field |
| Input | 5 A |
| Set point delay | Adjustable |
| Intervention inhibition after power-on | Adjustable |
| Intervention storage | Ability to store intervention |
| Rated input current | 5 A |
| Working frequency | 47…63 Hz, fn 50 Hz |
| Rated burden | ≤ 2 VA |
| Alarm type | 1 max. alarm + 1 min. or max. alarm, selectable |
| Set point | Continuously adjustable by trimmer |
| Intervention delay | Continuously adjustable by trimmer |
| Intervention time at power-on | Selectable by connection inside the terminal box |
| Reset | Manual reset via RESET front push-button |
| Intervention storage | Can be activated through terminal box connection |
| Power-on signalling | Green LED “ON” |
| Threshold exceeding signalling | Red LED “1” and/or “2” and relay switching |
| Return into normal state signalling | Red LED “A1” and/or “A2” and relay switching |
| Phase loss | Relay switching |
| Nominal temperature range | 0…70 °C |
| Climatic suitability | Suitable for tropical climates |
| Protection degree | IP50 front / IP20 terminals and housing |
