DatasheetDPI 104 from Druck is a microprocessor-controlled digital pressure gauge that offers an excellent combination of accuracy, versatility, and durability. Designed for test and calibration applications in industrial environments, it is ideal both as a stand-alone device or as part of a complete calibration solution with Druck’s hand pumps.
Main Features:
- 0.05% full-scale (FS) accuracy, including linearity, hysteresis, repeatability, and temperature effects
- Pressure ranges up to 1,400 bar (20,000 psi)
- 11 selectable pressure units (bar, psi, mbar, kPa, MPa, inHg, mmHg, etc.)
- Large, high-contrast LCD display with 5-digit resolution
- Additional bar graph for quick pressure overview
- Temperature-compensated accuracy from -10°C to +50°C
- Configurable 0–5 V analog output
- Switch test function with precise detection of open/close points
- Min/max value display, tare function, and alarms
- RS232 interface and IDOS compatibility
- Free SiCalPro software for remote monitoring and control
- Stainless steel or Inconel pressure cavity for aggressive media compatibility
Typical Applications:
- Pressure system testing and calibration
- Process monitoring
- Mobile or fixed industrial applications
- Use in aggressive media environments
Technical Specifications (Excerpt):
| Category | Details |
|---|---|
| Accuracy | 0.05% FS (including all errors across the specified temperature range) |
| Pressure ranges | 0–0.7 bar to 0–1,400 bar (10–20,000 psi), gauge, absolute or sealed gauge |
| Resolution | Up to 5 digits (depending on range) |
| Display | Numeric + bar graph (20 segments at 5% each) |
| Update rate | 2 readings per second |
| Analog output | 0–5 VDC, 0.1% FS accuracy |
| Alarm output | Open drain FET, max. 250 mA / 24 VDC |
| Communication | RS232 with ASCII command set |
| Power supply | 9V battery (alkaline), approx. 6 months life (1 hr/day use) |
| Protection rating | IP65 (ABS/PC housing) |
| Operating temperature | -10°C to +50°C |
| Dimensions | Diameter: 95 mm, Depth: 55 mm |
| Weight | Approx. 350 g |
Optional Accessories:
- Serial PC cable (RS232)
- External power supply (12V DC)
- Adapters for different thread types (NPT, BSP, UNF)
- UPM compatibility with extended pressure modules
Available Kits:
- Low-pressure kit: up to 2 bar with PV210 hand pump
- Pneumatic kit: up to 20 bar with PV211 pump
- Hydraulic kit: up to 1,000 bar with PV212 pump
- Combination kit: up to 700 bar with PV411A (pneumatic & hydraulic)