DatasheetIsoPAQ-11L is 1-channel loop powered isolator used for electrical isolation of 0(4)-20 mA signals to avoid measurement errors due to different voltage potentials or ground loops in an instrument installation.
The isolator does not need any power supply, which contributes to reduced installation costs compared to isolation transmitters.
The high reliability ensures a safe system operation and low maintenance costs.
Technical Specification
| Type of input | Passive |
| No. of channels | 1 channel |
| Input signal | 0(4)…20 mA |
| Output signal | 0(4)…20 mA |
| Typical accuracy | 0,1 % FS |
| Isolation level | 1,5 kV, 50 Hz |
| Power supply | No |
| Response time | < 5 ms |
| Ambient temperature | 20…+70 °C |
| Plug-in screw terminals | Yes |
| Housing width | 12,5 mm |
| Installation depth | 104 mm |