DatasheetThe Isolation Transmitter IsoPAQ-80S is used for high-precision isolation and conversion of bipolar and unipolar shunt voltages into standard mA/V signals.
Due to the extensive range selection, the selectable bandwidth and the universal power supply, IsoPAQ-80S is a true universal transmitter for any demanding shunt voltage isolation application.
The zero and span adjustments allow for a fine-tuning of the measurement loop.
The high reliability and the Protective Separation are additional features that ensure a safe system operation.
Technical Specification
| Type of Input | Active |
| No. of channels | 1 channel |
| Input signal | ±60 mV to ±500 mV 0…60 mV till 0…500 mV |
| Output signal | ±10 mA ±20 mA 0(2)…10 mA 0(4)…20 mA ±5 V ±10 V 0(1)…5 V 0(2)…10 V |
| Configuration | Range Selection |
| Typical accuracy | 0,1 % FS |
| Isolationlevel | 4 kV, 50 Hz |
| Working voltage | 1000 VAC/DC |
| Power Supply | 20…253 VAC/DC |
| Protective separation | Yes |
| Cut-off frequency (-3 dB) | 30 Hz/10 kHz Switchable |
| Ambient temperature | 20…+70 °C |
| Bipolar input | Yes |
| Bipolar output | Yes |
| Plug-in screw terminals | Yes |
| Housing width | 12,5 mm |
| Installation depth | 104 mm |