The plastic version of the IPT133 pressure transmitter is particularly suitable for media that lead to corrosion of stainless steel and thus to sensor failure. Due to the material of the O-ring, e.g. FFKM (Chemraz / Kalrez), the sensor is resistant to most aggressive chemicals. The ceramic sensor is resistant to aggressive and abrasive media. The capacitive measuring principle enables a very accurate and long-term stable measurement, even at lowest pressures and high overload resistance. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this data sheet.
Applications:
|
Technical data:
Measuring range | Smallest measuring range: 0…40 mbar / 400 mmH2O |
Largest measuring range: 0…60 bar / 600 mH2O | |
Analog output | 4…20 mA, 2-wires |
4…20 mA, 2-wires, II 1G Ex ia IIC T4 Ga | |
0…10 V, 3-wires | |
Power supply | 20 mA output: 9…30 V DC |
20 mA output ATEX: 12…30 V DC | |
10 V output: 15…30 V DC | |
Accuracy | ≤ ± 0,2 % FS @ 25 °C |
≤ ± 0,5 % FS @ 25°C ≤ 60 mbar | |
Long term stability | ≤ ± 0,2 % FS / Year |
Response time | 200 ms – others on request |
Swich-on time | < 1 s |
Temperature coefficient | Zero: ≤ ± 0,02 % FS / Kelvin |
Span: ≤ ± 0,02 % FS / Kelvin | |
Medium temperature | -25…80 °C |
-20…70 °C with EX ia IIC T4 | |
Surrounding temperature | -25…80 °C |
-20…70 °C with EX ia IIC T4 | |
Storage temperature | -40…85 °C |
Short-circuit resistance | Permanent |
Reverse polarity protection | Protection against reverse polarity, but no function |
Electromagnetic compatibility | Interference emissions and immunity acc. to EN 61326 |
Vibration | 10 g RMS (25…2000 Hz acc. to DIN EN 60068-2-6) |
Shock | 500 g / 1 ms acc. to DIN EN 60068-2-27 |
Wetted materials | Housing: Stainless steel 1.4404 |
Sensor: Ceramic Al2O3 | |
Sensor seal: FPM (Viton), NBR, EPDM, FFKM (Chemraz / Kalrez) | |
Protection type | IP 68 |
Weight | Approx. 600 g with 5 m cable |