DatasheetVoltage tester:
- precise display of the voltage 1 V up to 1200 V AC / 0,01 up to 1500 V DC
- resistant to voltage – CAT IV 600 V – VDE certified
- clear LED indicator for dangerous voltage
- hold the measured value with the HOLD key
- large illuminated display
Continuity tester:
- continuity test with sound
- resistance measurement in the range of 0,1 kOhm to 2000 kOhm
- green LED for continuity
Phase and phase sequence tester:
- phase tester with display “POL”
- phase sequence tester with LED display left / right
- phase and phase sequence tests can also be performed with insulating gloves
- additional phase sequence testing without ground reference for IT power grids
More functions:
- ST-version slim test electrodes for tight terminal blocks
- easy operation
- insulation fault detection by two-color cable insulation
- IP 65 – waterproof
| DSP 4 | DSP 4F | DSP 4ST | DSP 4FST | |
|---|---|---|---|---|
| Nominal voltage | 24 – 1000 V AC 24 – 1500 V DC |
|||
| Dispaly range | 1 – 1200 V AC 0,03 – 1500 V DC |
|||
| Resistance measurement | 0,1 – 2000 kOhm | |||
| Continuity tester with sound | yes | |||
| Frequency | DC / 15 – 10 000 Hz | |||
| Single pole outer conductor test (Phase) | yes | |||
| Phase sequence testing | yes | |||
| Power supply | 1 x 9 V | |||
| Overvoltage category | CAT IV 600 V CAT III 1000 VIEC 60664-1 (VDE 0110) |
|||
| Protection category | IP 65 | |||
| VDE GS certification in accordance with IEC 61243-3 | yes | |||
| Measuring point illumination | no | |||
| Additional load and 30 mA RCD-tripping | no | |||
| Phase sequence test for IT power grids without ground reference | no | yes | no | yes |
| Adjustable electrode length 4 or 15 mm | no | no | yes | yes |
| Art.-No. | 84402 | 84403 | 84405 | 84406 |
| Dimensions and weight | 275 x 89 x 35 mm (hand grip and display part)240 x 62 x 39 mm (display part) 270 g |
|||
| Packed Product Dimensions and weight |
300 x 100 x 50 mm
360 g |
|||